• Archives of Craniofacial Surgery
• /
• v.21 no.6
• /
• pp.351-356
• /
• 2020

Background: We have devised a novel surgical method, termed as temporalis muscle tendonperiosteum (T-P) compound surgical method, by modifying pre-existing techniques. Our method is characterized by elevation of temporalis muscle tendon and the periosteum of the mandibular ramus as a single compound. Here, we describe the concept and clinical outcomes of our method. Methods: We conducted both a cadaveric study and a clinical study. First, we used four human cadavers (two males and two females) to confirm the anatomy of the temporalis muscle tendon and availability of sufficient length extension through the elevation of the T-P compound. Moreover, we obtained measurements of the mouth angle and the philtrum angle from a total of six patients (two males and four females) and compared them between preoperatively and postoperatively. Results: The mean length of the periosteal portion was measured as 2.43± 0.15 cm (range, 2.2-2.6 cm). There was an improvement in the mouth angle postoperatively as compared with preoperatively (7.2°± 3.0° vs. 14.5°± 4.7°, respectively). Moreover, there was also an improvement in the philtrum angle postoperatively as compared with preoperatively (7.2°± 3.4° vs. 17.2°± 6.5°, respectively). Conclusion: Our method is a simple, minimally-invasive modality that is effective in achieving good clinical outcomes. Its advantages include an ability to achieve a firm extension of the temporalis muscle tendon as well as a lack of requirement for a donor site that may cause complications.

• Clinics in Shoulder and Elbow
• /
• v.24 no.2
• /
• pp.93-97
• /
• 2021

Background: Injection therapy around the distal biceps tendon insertion is challenging. This therapy may be indicated in patients with a partial distal biceps tendon tear, bicipitoradial bursitis and tendinopathy. The primary goal of this study was to determine the accuracy of manually performed injections without ultrasound guidance around the biceps tendon. Methods: Seven upper limb specialists, two general orthopedic specialists, and three orthopedic surgical residents manually injected a cadaver elbow with acrylic dye using an anterior and a lateral infiltration approach. After infiltration the cadaveric elbows were dissected to determine the location of the acrylic dye. Results: In total, 79% of the injections were localized near the biceps tendon. Of these injections, 20% were localized on the radius near the bicipitoradial bursa. In total, 53% of the performed infiltrations were injected by anterior and 47% by lateral approaches. Of the injections near the distal biceps (79%), 47% were injected by an anterior and 53% by a lateral approach. Of the injections on the radius (20%), 33% were injected by anterior and 67% by lateral approach. Of the inaccurate injections (21%), 75% were injected anterior and 25% lateral. Conclusions: Manual infiltration without ultrasound guidance for distal biceps pathology lacks accuracy. We therefore recommend ultrasound guidance for more accurate infiltration.

• Clinics in Shoulder and Elbow
• /
• v.24 no.3
• /
• pp.141-146
• /
• 2021

Background: The purpose of the present study was to determine how long superior screws alone or in combination with posterior placement of metaglene screws protruding and penetrating into the scapular spine in reverse total shoulder arthroplasty affect the strength of the scapular spine in a fresh cadaveric scapular model. Methods: Seven fresh cadaver scapulas were allocated to the control group (short posterior and superior screws) and seven scapulars to the study group (spine base fixation with a four long screws, three with both long superior and long posterior screws). Results: The failure load was lower in the spine fixation group (long screw, 869 N vs. short screw, 1,123 N); however, this difference did not reach statistical significance (p>0.05). All outside-in long superior or superior plus posterior screws failed due to scapular spine base fracture; failures in the short screw group were due to acromion fracture. An additional posterior outside-in screw failed to significantly decrease the failure load of the acromion spine. Conclusions: The present study highlights the significance of preventing a cortical breach or an outside-in configuration when a superior or posterior screw is inserted into the scapular spine base.

• Clinics in Shoulder and Elbow
• /
• v.25 no.4
• /
• pp.282-287
• /
• 2022

Background: Muscular forces drive proximal humeral fracture deformity, yet it is unknown if arm position can help mitigate such forces. Our hypothesis was that glenohumeral abduction and humeral internal rotation decrease the pull of the supraspinatus and subscapularis muscles, minimizing varus fracture deformity. Methods: A medial wedge osteotomy was performed in eight cadaveric shoulders to simulate a two-part fracture. The specimens were tested on a custom shoulder testing system. Humeral head varus was measured following physiologic muscle loading at neutral and 20° humeral internal rotation at both 0° and 20° glenohumeral abduction. Results: There was a significant decrease in varus deformity caused by the subscapularis (p<0.05) at 20° abduction. Significantly increasing humeral internal rotation decreased varus deformity caused by the subscapularis (p<0.05) at both abduction angles and that caused by the supraspinatus (p<0.05) and infraspinatus (p<0.05) at 0° abduction only. Conclusions: Postoperative shoulder abduction and internal rotation can be protective against varus failure following proximal humeral fracture fixation as these positions decrease tension on the supraspinatus and subscapularis muscles. Use of a resting sling that places the shoulder in this position should be considered.

• Anatomy and Cell Biology
• /
• v.56 no.4
• /
• pp.428-434
• /
• 2023

Pulmonary veins (PVs) and their myocardial sleeves play an important role in the development of atrial fibrillation. Hence, detailed knowledge of PV anatomy is required to improve the procedural success rate and prevent complications during cardiac procedures. The aim of this study was to evaluate the PV anatomy along with anatomical variations in the Indian population. Total 100 formalin fixed cadaveric hearts were examined. The number and pattern of the PVs were observed along with the measurement of their horizontal and vertical diameters. The ovality index for each PV was calculated. Classical PV pattern was observed in 62% cases. Variant pattern like additional right middle PV pattern and left common PV pattern were found in 20% and 10% cases respectively. A separate pattern with presence of both right middle PV and left common PV was observed in 6% cases. In the classical pattern right superior PV was the largest followed by right inferior, left superior and left inferior PV. The additional right middle PV had the smallest diameter whereas the left common PV had the largest diameter. Almost all the veins had greater vertical diameters in comparison to horizontal diameters. The variant PVs were oval and had greater ovality index compared to the normal PVs. In classical pattern 54.8% hearts whereas in variant pattern 79% hearts had one or more oval PV. The given data can help clinicians for planning and execution of various interventional and electrophysiological procedures involving PVs.

• Anatomy and Cell Biology
• /
• v.56 no.4
• /
• pp.448-455
• /
• 2023

The azygos vein can be formed as a single root, two roots, and three roots, namely lateral, intermediate and the medial roots respectively. The hemiazygos vein and the accessory hemiazygos vein are the tributaries of azygos vein rather than its left side equivalents. Its variations, especially in young persons without any relevant risk factors, may result in thromboembolic illness. This study aimed to describe the morphological and morphometric variations of azygos system of veins. The present study was conducted on thirty formalin fixed adult human cadavers by dissecting azygos vein from formation to termination and variations were noted. The azygos vein was formed by a single root in 56.7%, by two roots: the lateral root and intermediate root in 36.7% cases and by the lateral root and medial root in 6.6%. The vertebral level of termination of azygos vein was seen at the level of T4 vertebrae in 70% cases, at the level of T3 vertebrae in 20% of cases and at the level of T5 vertebrae in 10% cases. The course of azygos vein was varying in 13.3%. These morphological variations can be useful while performing mediastinal surgery, mediastinoscopy, surgery of the deformations of the vertebral column, neurovascular surgeries of the retroperitoneal organs, disc herniation and fracture of thoracic vertebrae.

• Journal of Korean Neurosurgical Society
• /
• v.51 no.5
• /
• pp.247-252
• /
• 2012

Objective : The anatomical knowledge is the most important and has a direct link with success of operation in cervical spine surgery. The authors measured various cervical parameters in cadaveric dry bones and compared with previous reported results. Methods : We made 255 dry bones age from 19 to 72 years (mean, 42.3 years) that were obtained from 51 subjects in 100 subjects who donated their bodies. All measurements from C3-C7 levels were made using digital vernier calipers, standard goniometer, and self-made fix tool for two different cervical axes (canal and disc setting). We classified into 4 groups (uncinate process, vertebral body, lamina, and pedicle) and measured independently by two neurosurgeons for 28 parameters. Results : We analyzed 23970 measurements by mean value and standard deviations. In comparing with previous literatures, there are some different results. The mean values for uncinate process (UP) width ranged from 5.5 mm at C4 and 5 to 6.3 mm at C3 and C7 in men. Also, in women, the mean values for UP width ranged from 5.5 mm at C5 to 6.3 mm at C7. C7 was widest and C5 was most narrow than other levels. The antero-posterior length of UP tended to increase gradually from C3 to C6. The tip way, tip distance, and base distance of UP also showed increasing pattern from C3 to C7. Conclusion : These measurements can provide the spinal surgeons with a starting point to address bony architectures surrounding targeted soft tissues for safeguard against unintended damages during cervical operation.

• Journal of Korean Neurosurgical Society
• /
• v.57 no.4
• /
• pp.229-234
• /
• 2015

Objective : Pedicle screw fixation for spine arthrodesis is a useful procedure for the treatment of spinal disorders. However, instrument failure often occurs, and pedicle screw loosening is the initial step of a range of complications. The authors recently used a modified transpedicular polymethylmethacrylate (PMMA) screw augmentation technique to overcome pedicle screw loosening. Here, they report on the laboratory testing of pedicle screws inserted using this modified technique. Methods : To evaluate pullout strengths three cadaveric spinal columns were used. Three pedicle screw insertion methods were utilized to compare pullout strength; the three methods used were; control (C), traditional transpedicular PMMA augmentation technique (T), and the modified transpedicular augmentation technique (M). After control screws had been pulled out, loosening with instrument was made. Screw augmentations were executed and screw pullout strength was rechecked. Results : Pedicle screws augmented using the modified technique for pedicle screw loosening had higher pullout strengths than the control ($1106.2{\pm}458.0N$ vs. $741.2{\pm}269.5N$; p=0.001). Traditional transpedicular augmentation achieved a mean pullout strength similar to that of the control group ($657.5{\pm}172.3N$ vs. $724.5{\pm}234.4N$; p=0.537). The modified technique had higher strength than the traditional PMMA augmentation technique ($1070.8{\pm}358.6N$ vs. $652.2{\pm}185.5N$; p=0.023). Conclusion : The modified PMMA transpedicular screw augmentation technique is a straightforward, effective surgical procedure for treating pedicle screw loosening, and exhibits greater pullout strength than traditional PMMA transpedicular augmentation. However, long-term clinical evaluation is required.

• Childhood Kidney Diseases
• /
• v.19 no.2
• /
• pp.176-179
• /
• 2015

Rituximab (RTX), a monoclonal antibody against the B-cell marker CD20, is commonly used as a treatment for antibody-mediated diseases or B-lymphocyte-mediated diseases. Destruction of B cells may reverse the disease course in many conditions; however, patients who are treated with RTX cannot respond appropriately to de novo infection due to lack of B lymphocytes. Here, we report one such case. A 7-year-old renal allograft recipient presented with severe anemia due to parvovirus infection after RTX treatment. The patient had focal segmental glomerulosclerosis and had received cadaveric kidney transplantation 6 months previously. She was treated with high-dose steroid for acute rejection and RTX for Epstein Barr Virus infection 3 months previously. At presentation, her hemoglobin level was 5.4 g/dL and leukocyte and platelet counts were normal. She had microcytic normochromic anemia and high viral load of parvovirus B19(70,578 copies/mL). Intravenous immunoglobulin ($200mg/kg{\cdot}d$) treatment controlled the progression of anemia and parvovirus infection. De novo parvovirus infection during the B lymphocyte-depletion period may have precipitated the severe anemia in this case. Close monitoring of infection is required after RTX therapy.

• Archives of Plastic Surgery
• /
• v.41 no.6
• /
• pp.673-678
• /
• 2014

Background The depth of graft harvest and the residual dermis available for reepithelization primarily influence the healing of split-skin graft donor sites. When the thigh region is chosen, the authors hypothesize based on thickness measurements that the anterolateral region is the optimal donor site. Methods Full-thickness skin specimens were sampled from the anteromedial, anterior, and anterolateral regions of human cadavers. Skin specimens were cut perpendicularly with a custom-made precision apparatus to avoid the overestimation of thickness measurements. The combined epidermal and dermal thicknesses (overall skin thickness) were measured using a digital calliper. The specimens were histologically stained to visualize their basement membrane, and microscopy images were captured. Since the epidermal thickness varies across the specimen, a stereological method was used to eliminate observer bias. Results Epidermal thickness represented 2.5% to 9.9% of the overall skin thickness. There was a significant difference in epidermal thickness from one region to another (P<0.05). The anterolateral thigh region had the most consistent and highest mean epidermal thickness ($60{\pm}3.2{\mu}m$). We observed that overall skin thickness increased laterally from the anteromedial region to the anterior and anterolateral regions of the thigh. The overall skin thickness measured $1,032{\pm}435{\mu}m$ in the anteromedial region compared to $1,220{\pm}257{\mu}m$ in the anterolateral region. Conclusions Based on skin thickness measurements, the anterolateral thigh had the thickest epidermal and dermal layers. We suggest that the anterolateral thigh region is the optimal donor site for split-skin graft harvests from the thigh.