• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2010.04a
• /
• pp.187-190
• /
• 2010

GPS survey came into wide use, but there are inefficient parts in related laws and regulations. Especially, to get GPS surveying results under 1.5cm permissible error the observation time must be longer than 8 hours in triangulation points surveying regulations. However, GPS surveying technology is developing now, so results could be acceptable under 4 hours observation time. Therefore, this study made a stable standard of observation time in GPS survey by comparing the errors due to observation time, and used PAJU, DOND and YANP's GPS data and 6 cadastral points' survey data. Also, to analyze the variations of results due to baseline distance, applied each GPS site as a fixed point and compared the positions. As a result, the stable satisfactory results were calculated under 4 hour survey, when the baseline distances were under 30km.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2004.11a
• /
• pp.459-464
• /
• 2004

본 연구는 서로 다른 원점을 가진 구소삼각원점지역과 통일원점지역간의 연속지적도 접합에 있어서 수치지적도를 이용하여 제작한 두 원점지역의 연속지적도 접합도와 최신 항공측량기법으로 생성한 수치정사사진을 중첩ㆍ조정함으로써 상이한 원점으로 제작된 연속지적도 접합에 관한 효율적인 성과 유지 방안을 도출함으로써 국민들에게 측량성과에 대한 신뢰도를 높이고, 도해지적측량의 대안으로 신속하고 정확한 수치적 해석기법의 측량방법을 활용하고자 한다.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2010.04a
• /
• pp.289-290
• /
• 2010

Orthoimage, digital map, cadastral map, and areas and district were converted and overlaid so as to apply legal restrictions on boundaries set by a land object concept restriction line and to analyze boundaries formed by overlaying areas and districts and characteristics of restrictions. With the restriction lines made on the basis of orthoimage.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.32 no.spc4_2
• /
• pp.401-412
• /
• 2014

This study is purposed on showing an effective process for coordinate transformation of cadastral maps, based on the local datum, in the World Geodetic System (WGS) for Cadastral Reform Project (CRP). The process follows three steps: coordinate adjustment, datum transformation and distortion modeling. The first procedure is that point coordinates on local datum has to be adjusted by those GPS observed point-to-point distances, using trilateration. Secondly, the adjusted coordinates need to be transformed to WGS by applying the Affine model, while the verification of the methodology is implemented under numerical experiments. To conduct this procedure, 195 points in the same coordinate origins in Seoul and 61 points in several different origins in Incheon are used in the estimation. As a result, there are less than 2cm coordinate differences between transformed coordinates and measured ones at everywhere. Also, it is remarkable that the transformation does not depend on either of the particular common points or the sizes of computed region. Therefore, this suggested methodology is expected to easily provide identifications and corrections for points-deviations for improved quality of the cadastral map by distortion modeling through CRP.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.21 no.3
• /
• pp.199-207
• /
• 2003

In the study, the open area keeping a few visible satellites and the urban area covered with the high building, an electric pole were chosen far evaluation of accuracy of satellite positioning. First, suggest the validity of GPS/GLONASS, TS/RTK-GPS, and compared the accuracy with that of the classical surveying method. As a result, In static relative surveying, the difference of between the known cadastral supplementary control station and that of the acquired is 0.000∼.0006m in GPS alone, GPS/GLONASS, and In the RTK-GPS/TS, 0.010∼0.077m on the non-ambiguity fixed solutions in the urban area 0.008∼0.078m in the open area. it proved to be valid because it is within the allowed connecting errors, i.e 12cm on the baseline of loom in l/l,200 cadastral map.

• Spatial Information Research
• /
• v.12 no.1
• /
• pp.101-110
• /
• 2004

Research that establish new cadastral survey model that use GPS to introduce GPS observation technique in cadastral survey and research that develop connection technologies are now abuzz. The purpose of this research is to keep in step in such trend and grasp present condition and performance of surveying connection to common use GPS data processing software, and analyze data processing algorithm, and develop suitable GPS data processing software in our real condition regarding GPS data processing and result of control point calculation. This research studies analysis common use software and error occurrence by data processing method that college and company have. Also, It analyzes algorithm that is applied to existing GPS data processing software. After that we study algorithm that is most suitable with cadastral survey and then develop cadastral survey calculation software for new cadastral control points.

• Journal of Advanced Navigation Technology
• /
• v.14 no.5
• /
• pp.625-631
• /
• 2010

In this paper, robustness performance of SNUR message is compared with those of existing ones, RTCM(Radio Technical Commission for Maritime Services) v2 MT(Message Type) 18/19 and MT 20/21 under a poor broadcast condition such as temporary data loss or disconnection We defined the temp oral data loss as 2 second delay and reconnection after disconnection as 7 second latency, and then evaluated its robustness for each latency case by double differentiating the observables. Our result shows that SNUR protocol method can reduce the latency error of the existing RTCM messages by 30~60%. Moreover, a rover using SNUR message, whose latency error is bounded within 1/4 L1 wave length, can figure out its own fixed position continuously in spite of 7 second disconnection, while the other using RTCM message, whose error is larger than half wave length, cannot keep its previous fixed solution.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.14 no.2
• /
• pp.209-218
• /
• 1996

This study aims to draw a technique for practical using of GPS surveying to decide the positions of cadastrial control points. GPS surveying is carried out at cadastrial triangulation points and supplementary control points. This paper includes characteristics of transformation of WGS84 into Tokyo datum, two dimensional solutions for GPS baseline vector, and combined solutions of both GPS and terrestrial data. As a results of this study, it is verifiable that GPS surveying is very efficient to check the existing control network. 2-D network adjustment technique using GPS baseline vector is applicable to Tokyo datum without coordinate transformation. And it is expected to improve efficiency by using either rapid-static or stop and go kinematic surveying in cadastrial surveying at small areas.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2006.04a
• /
• pp.381-386
• /
• 2006

Currently, 1/5,000 Digital Topographic Map covers the whole country with administrative boundary of Gu, while some region has already been constructed with 1/1,000 digital topographic map has legal boundary of Dong. Here, Dong in 1/1,000 scale represents the legal boundary which is used in the address most of time. Therefore, there is no administrative-Dong yet although it is very useful in various fields. In this study, we suggested a method to construct the administrative boundary extending to the level of Dong empirically. In addition, the practical application of the administrative boundary in GIS is discussed. Two methods are applied to construct the administrative boundary to the level of administration-Dong; using the edited cadastral map and the digital topographic map. When the edited cadastral map is used, some problems such as boundary discordance to superordinate administrative area is appeared. On the other hand, using digital topographic map showed simple construction processes and easy connection with other framework data. Therefore, it is recommended that the digital topographic map should be used in the construction of the administrative boundary It would be useful as framework data in various industries and public operations.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.25 no.6_1
• /
• pp.565-574
• /
• 2007

Because of most current cadastral systems maintain 2D geometric descriptions of parcels linked to administrative records, the system may not reflect current tendency to use space above and under the surface. The land has been used in multi-levels, e.g. constructions of multi-used complex buildings, subways and infrastructure above/under the ground. This cadastre situation of multilevel use of lands cannot be defined as cadastre objects (2D parcel-based) in the cadastre systems. This trend has requested a new system in which right to land is clearly and indisputably recorded because a right of ownership on a parcel relates to a space in 3D, not any more relates to 2D surface area. Therefore, this article proposes a 3D spatial data model to represent geometrical and topological data of 3D (property) situation on multilevel uses of lands in 3D cadastre systems, and a conceptual 3D cadastral model in Korea to design a conceptual schema for a 3D cadastre. Lastly, this paper presents the results of an experimental implementation of the 3D Cadastre to perform topological analyses based on 3D Network Data Model to identify spatial neighbors.