• Title/Summary/Keyword: Cadastral Survey

Search Result 167, Processing Time 0.02 seconds

Orhtophoto Accuracy Assessment of Ultra-light Fixed Wing UAV Photogrammetry Techniques (초경량 고정익무인항공기 사진측량기법의 정사영상 정확도 평가)

  • Lee, In Su;Lee, Jae One;Kim, Su Jeong;Hong, Soon Heon
    • KSCE Journal of Civil and Environmental Engineering Research
    • /
    • v.33 no.6
    • /
    • pp.2593-2600
    • /
    • 2013
  • The main purpose of this study is to carry out the performance evaluation of Ultra-light Fixed Wing UAV(Unmanned Aerial Vehicle) photogrammetry which is being, currently, applied for various fields such as cultural assets, accident survey, military reconnaissance work, and disaster management at home and abroad. Firstly, RMSE estimation of Aerial Triangulation (AT) are within approximately 0.10 cm in position (X, Y). And through the comparison of parcel's boundary points coordinates by terrestrial surveying and by UAV photogrammetry, the analysis shows that RMSE are shifted approximately 0.174~0.205 m in X-direction, 0.294~0.298 m in Y-direction respectively. Lastly, parcel's area by orthophoto of UAV photogrammetry and by that of cadastre register has been shown the difference by 0.118 m2. The results presented in this study is just one case study of orthophoto accuracy assessment of Ultra-light fixed wing UAV photogrammetry, hereafter various researches such as AT, direct-georeferencing, flight planning, practical applications, etc. should be necessary continuously.

Ambiguity Determination Technique for Multiple GPS Reference Stations using the Combination of L1/L2 Carrier Phase (L1/L2 측정치 조합을 이용한 GPS 기준국간 반송파 미지정수 결정 기법)

  • Park, Byung-Woon;Song, June-Sol;Kee, Chang-Don
    • Journal of Advanced Navigation Technology
    • /
    • v.15 no.5
    • /
    • pp.705-713
    • /
    • 2011
  • In this paper, we introduce two techniques for resolving integer ambiguities between reference stations, which is one of the most important processes in Network RTK correction generation process. Each techniques uses Hatch filter and combination of L1/L2 measurements and we used simulation data and real data to evaluate performance of the techniques. For evaluating performance of each technique, we compared corrections generated from user site and Network RTK. As a result, Network RTK with the technique which uses Hatch filter improves user performance much more than single baseline RTK does. Residual of user is smaller than a half size of wavelength so it does not affect user integer ambiguity resolution, however, it contains significant bias error. On the other hand, when we used the technique which uses combination of L1/L2 measurements, residual error of user is largely reduced compared to the technique using Hatch filter.

Institutional Issues in Promoting Korean Spatial Data Exchange

  • Kim, Kam-Lae;Choi, Won-Jun
    • Korean Journal of Geomatics
    • /
    • v.2 no.1
    • /
    • pp.75-82
    • /
    • 2002
  • The information system fields of spatial applications have rapidly grown during the last decade in Korea. Spatial data has been produced for a variety of systems without common standards until national GIS Committee defined the data exchange formats among spatial databases in the middle of 1990's. It aimed at promoting data sharing between the different systems in similar application fields. However, a considerable number of databases built prior to the introduction of the standards are not yet standard compliant but still play the roles of the main producers/consumers in the data collection field such as early developed huge AM/FM systems maintained by governmental organizations. The strong autonomy of these databases keeps their own data models, formats and descriptions from being standardized, which leads the sharing to a more difficult stage. Sharing is another way of data acquisition with least efforts and time away from direct collection. A data clearinghouse is the core module which directs users to the relevant data resources. The contents of datasets should be described with predefined metadata standards for precise indexing. Moreover, a number of technical problems have to be resolved for the common use of data between heterogeneous spatial database systems. However, the technical issues can be covered by the present information technologies. The difficulties persist in the political/institutional issues. Institutional issues are derived from the diverse sources such as political background, governmental policies, related laws and/or regulations. The paper will firstly make an analysis of current situation in terms of Korean policies, laws and regulations, secondly abstract the institutional issues from the situation analysis, lastly present guidelines for promoting spatial data sharing in Korea.

  • PDF

Accuracy Assessment of Parcel Boundary Surveying with a Fixed-wing UAV versus Rotary-wing UAV (고정익 UAV와 회전익 UAV에 의한 농경지 필지경계 측량의 정확도 평가)

  • Sung, Sang Min;Lee, Jae One
    • Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
    • /
    • v.35 no.6
    • /
    • pp.535-544
    • /
    • 2017
  • UAVs (Unmanned Aerial Vehicle) are generally classified into fixed-wing and rotary-wing type, and both have very different flight characteristics each other during photographing. These can greatly effect on the quality of images and their productions. In this paper, the change of the camera rotation angle at the moment of photographing was compared and analyzed by calculating orientation angles of each image taken by both types of payload. Study materials were acquired at an altitude of 130m and 260m with fixed-wing, and at an altitude of 130m with rotary-wing UAV over an agricultural land. In addition, an accuracy comparison of boundary surveying methods between UAV photogrammetry and terrestrial cadastral surveying was conducted in two parcels of the study area. The study results are summarized as follows. The differences at rotation angles of images acquired with between two types of UAVs at the same flight height of 130m were significantly very large. On the other hand, the distance errors of parcel boundary surveying were not significant between them, but almost the same, about within ${\pm}0.075m$ in RMSE (Root Mean Square Error). The accuracy of boundary surveying with a fixed-wing UAV at 260m altitude was quite variable, $0.099{\sim}0.136m$ in RMSE. In addition, the error of area extracted from UAV-orthoimages was less than 0.2% compared with the results of the cadastral survey in the same two parcels used for the boundary surveying, In conclusion, UAV photogrammetry can be highly utilized in the field of cadastral surveying.

A Study on the Establishment of Course evaluation model in the Cadastral Field (지적분야 과정평가모형 구축에 관한 연구)

  • Seo, Yong-Su;Choi, Seung-Young
    • Journal of Cadastre & Land InformatiX
    • /
    • v.46 no.2
    • /
    • pp.297-312
    • /
    • 2016
  • The current government strives to train those supposed to drive the national economy, and bridge the gap between qualification and industrial sites through competency-based qualification systems, not the educational background. In this regards, the government is planning to adopt the course evaluation qualification system. The course evaluation qualification system, on a basis of the NCS, is a system to qualify certain people completing the education and training fulling a specific requirement for a national technical qualification in case they meet the internally and externally assessed criteria. This can be seen as an attempt to practically link between job training and qualifications. The NCS model and learning module in the cadastral field are already utilized as the training and eduction in the specialized school and colleges. However, the current national technical qualification system is considered as a main system because the course evaluation qualification system has not been introduced yet. This study analyzed the process of the course evaluation qualification system, and conducted a survey to solicit feedback on introduction of course evaluation qualification system, Besides, the NCS evaluation model is presented in order for the introduction of course evaluation qualification system in the cadastral fields.

A Study on the Selection Method of Subject Parcel to Alter Land Category by Fuzzy GIS Analysis - Focused on Road State of Government Owned and Public Land - (퍼지 GIS 공간분석에 의한 지목변경 대상필지 선정방법에 관한 연구 - 국공유지 도로현황을 중심으로 -)

  • Cho, Tae-In;Choi, Byoung-Gil
    • Journal of Korean Society for Geospatial Information Science
    • /
    • v.19 no.3
    • /
    • pp.57-66
    • /
    • 2011
  • The purpose of this study is to research into a method of selecting the subject parcel with a change in the category of land given surveying the land alteration state focusing on the present state of road in the government-owned and public land by using the fuzzy membership function and GIS spatial analysis. It selected the old town center of Incheon Jung-gu, and the new downtown & the forest land of Gyeyang-gu as the research subject region, and carried out GIS spatial analysis on a serial cadastral map, urban planning road layer of Korea Land Information System, practical width of road layer of Road Name Address Management System & cadastral data base, and then calculated the suitable index for the subject parcel with a change in the category of land by using the fuzzy membership function with having the critical value as the area ratio of each parcel on a serial cadastral map that was incorporated into road layer or practical width of road layer. It finally selected the parcel, which is different in land category from the real land usage, as the final subject parcel for altering land category, by using the screen of visualizing the suitable index and the aerial ortho photograph. As a result of the final selection, the fuzzy GIS spatial analysis method, which was suggested in this study, is judged to be efficient in the selection period and the methodology compared to the existing manual method. It could be confirmed to be more suitable method for downtown than forest land and for the new downtown than the old town center.

Critical Factors on Forest Land Management in Vietnam

  • TRAN, Thai Yen;PHAM, Phuong Nam
    • The Journal of Asian Finance, Economics and Business
    • /
    • v.9 no.9
    • /
    • pp.167-179
    • /
    • 2022
  • The study aims to determine the influencing factors and their impact on the management of the forest land used for production allotted to peasant households and proposes solutions to improve its management. Secondary data was calculated until the end of 2019 at state agencies. The primary data was collected through 2 steps. To determine the factors influencing forest land management for production, step one involved a survey of 100 households that were given access to forest land. Step 2 involved a survey of 215 households to determine how factors impacted the Likert scale's five levels. The study also used a multivariate regression model and SPSS24.0 software to determine the impact rates of factor groups. The study indicated 43 factors that belong to 11-factor groups affecting the management of forest land for production. The policy and legal factors group is the most influential, with an impact rate of 12.72%, followed by 10 other factor groups with impact rates ranging from 4.08% to 11.74%. The solutions include improving policies and laws, strengthening the dissemination of policies and laws; encouraging investment, completing cadastral work, intensifying inspection, examination, and sanctioning of administrative violations of land, upgrading the infrastructure system, and ensuring enough human resources to manage forest land.

A Basic Study for Forest Landscape Fragmentation Monitoring (산지경관 파편화 모니터링을 위한 기초연구)

  • An, Seung Man
    • Journal of Korean Society of Forest Science
    • /
    • v.108 no.3
    • /
    • pp.454-467
    • /
    • 2019
  • This study proposed a forest landscape (patch) fragmentation monitoring framework using a cadastral forest land dataset and validated the feasibility of such monitoring. The following results were found. First, the forest landscape has fragmented too quickly. Hence, immediate national monitoring and management are required. Second, forest landscape monitoring should be linked to other survey frameworks. Horizontal fragmentation monitoring based on the forest landscape (geographic information system [GIS] polygons) is insufficient to determine ecological processes. Third, precautionary principle regulation to link forest landscape fragmentation monitoring to assessment systems such as environmental impact analysis or disaster impact analysis should follow.

National Datum Transformation Parameters of South Korea Using Weighted Parameter Constraints (가중변수법에 의한 국가좌표계 변환요소의 산정)

  • 이영진
    • Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
    • /
    • v.15 no.1
    • /
    • pp.29-39
    • /
    • 1997
  • The need of transformation parameters from local geodetic datums to a geocentric coordinate system is becoming more common, with the increasing application of satellite positioning techniques to LIS/GIS survey with cadastral management. In this paper, the national transformation parameters between the Korean geodetic coordinates which is based on the Bessel 1841 ellipsoid and the WGS84 ellipsoid are determined by the least square methods with weighted parameter constraints. Three-dimensional geocentric coordinates are based on GPS observation at 31 stations in the geodetic network, the datum parameters are computed within a standard deviation of less than 1 meter. In South Korea, the national transformation parameters with Bessel geoid-heights are useful for GPS baseline processing and for middle-scale map/database transformation.

  • PDF

Development of Soil Analysis System for Land Readjustment Using GIS (GIS를 이용한 경지정리 토양처리 분석시스템 개발)

  • Lee, Ju-Seung;Goh, Hong-Seok;Lee, So-Yeal
    • Journal of Korean Society for Geospatial Information Science
    • /
    • v.12 no.4 s.31
    • /
    • pp.13-19
    • /
    • 2004
  • It has been a common practice to use manually processed soil maps in planning of land readjustment. This study is intended to develop a geographic information system for computerized processing of soil maps. The pilot region of land readjustment for this study was set at a mountain area with diverse formation of soil. Cadastral maps were employed for the basis map, and the main map was prepared using the information obtained from in-situ soil survey and laboratory tests. The detailed soil maps were drawn using the geographic information system, and analyzed and compared with manually processed maps. The soil maps, in conjunction with a computer program of land readjustment design, can be applied in estimation of soil works appropriate for the given soil condition, and also in selecting the efficient construction equipments.

  • PDF