• 한국강구조학회 논문집
• /
• 제19권4호
• /
• pp.395-402
• /
• 2007

허용응력설계법과 강도설계법으로 설계된 강합성 플레이트 보강형과 콘크리트 보강형으로 구성된 장대교량인 복합사장교의 확률적 위험도 평가를 수행하였다. 최대 축력, 전단력 및 정 부모멘트 발생단면에 기초한 위험단면에 대해 AFOSM 알고리즘과 시뮬레이션기법을 사용하여 케이블, 주탑, 보강형 및 강-콘크리트 접합부의 요소신뢰성을 평가하였다. 체계신뢰성해석을 위해, 케이블, 주탑 및 콘트리트와 강합성 보강형으로 구성된 복합사장교의 시스템을 조합 파괴모드로 모델링하였으며, 이를 통해 전체 구조시스템의 파괴확률과 신뢰성지수를 산출하였다. 본 연구를 통해 복합사장교의 거동특성에 기초한 파괴모드를 제안하였고 위험도평가 방법으로서 부분 ETA기법의 효용성을 확인하였다.

• 한국해양학회지:바다
• /
• 제8권2호
• /
• pp.203-209
• /
• 2003

본 연구에서는 해양탐사장비를 예인하는 예인케이블에 관한 3차원 동적해석을 수행하였다. 해양케이블에 관한 지배방정식 중에서 굽힘강성 성분도 포함되는 보다 일반적인 지배방정식을 사용하였으며, 지배방정식은 3차원 비선형, 연성방정식이다. 예인선박의 예인속도와 측면주사음탐기의 중량에 따라서 예인단에서 발생하는 장력을 추정하였으며, 임의의 시간에 대한 케이블의 전체형상을 추정하였다. 정적해석결과를 통하여 특정한 수심에서 해양탐사장비를 예인할 때 예인속도를 잘못 조절한다면 관측장비가 해저면 바닥에 닿아서 탐사장비를 손실할 수 있다는 것을 알 수 있었다. 다양한 예인속도에 따른 예인단에서 장력의 변화를 살펴보았는데, 이를 통하여 예인단 장력은 예인속도가 임계속도보다 클 때는 접선하중성분이 지배적이고 작을 때는 자중효과가 지배적으로 나타난다는 것을 알 수 있었다. 또한 속도가 변하는 천이영역에서는 장력의 피크가 나타났으며 이것은 케이블에 충격력 효과로 작용할 수 있으므로 예인선박 운용에 이를 잘 고려해야 할 것이다. 본 연구결과는 다양한 해양탐사장비의 예인문제에 적용할 수 있을 것이다.

• Earthquakes and Structures
• /
• 제16권3호
• /
• pp.349-358
• /
• 2019

Long span cable-stayed bridges are extremely vulnerable to dynamic excitations such as which caused by traffic load, wind and earthquake. Studies on cable-stayed bridge vibration control have been keenly interested by researchers and engineers in design new bridges and assessing in-service bridges. In this paper, a novel Hybrid-Tuned Mass Damper (H-TMD) is proposed and a hybrid control model named Mixed Logic Dynamic (MLD) is employed to build the bridge-H-TMD system to mitigate the vibrations. Firstly, the fundamental theory and modeling process of MLD model is introduced. After that, a new state switching design of the H-TMD and state space equations for different states are proposed to control the bridge vibrations. As the state switching designation presented, the H-TMDs can applied active force to bridge only if the structural responses are beyond the limited thresholds, otherwise, the vibrations can be reduced by passive components of dampers without active control forces provided. A new MLD model including both passive and active control states is built based on the MLD model theory and the state switching design of H-TMD. Then, the case study is presented to demonstrate the proposed methodology. In the case study, the control scheme with H-TMDs is applied for a long span cable-stayed bridge, and the MLD model is established and simulated with earthquake excitation. The simulation results reveal that the suggested method has a well damping effect and the established system can be switched between different control states as design excellently. Finally, the energy consumptions of H-TMD schemes are compared with that of Active Tuned Mass Damper (ATMD) schemes under variable seismic wave excitations. The compared results show that the proposed H-TMD can save energy than ATMD.

• 대한토목학회논문집
• /
• 제26권1A호
• /
• pp.21-33
• /
• 2006

사장교 구조물을 대상으로 확률유한요소법을 신뢰성이론에 적합하도록 정식화하여 신뢰성해석을 보다 효율적으로 수행하고자 한다. 사장교의 초기평형해석을 수행한 후, 섭동법을 이용하여 선형 비선형 확률유한요소해석을 수행할 수 있으며, 확률변수의 상관성에 따른 신뢰성해석을 수행할 수 있는 프로그램을 작성하였다. 작성된 프로그램을 이용하여 사장교의 응답해석을 검토한 결과, 확률변수의 상호간 상관성에 따른 절점변위, 부재력 및 케이블긴장력에 대한 분산특성을 정량적으로 평가할 수 있었다. 또한 신뢰성지수 및 파괴확률을 검토하여 사장교 구조물의 안전성을 명확하게 파악하였다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제13권1호
• /
• pp.889-901
• /
• 2021

The tension of cables and motion response significantly affect safety of an immersed tunnel element in the immersion process. To investigate those, a hydrodynamic scale-model test was carried out and the model experiments was conducted under wind, current and wave loads simultaneously. The immersion standby (the process that the position of the immersed tunnel element should be located before the immersion process) and immersion process conditions have been conducted and illustrated. At the immersion standby conditions, the maximum force of the cables and motion is much larger at the side of incoming wind, wave and current, the maximum force of Element-6 (6 cables directly tie on the element) is larger than for Pontoon-8 (8 cables tie on pontoon of the element), and the flexible connection can reduce the maximum force of the mooring cables and motion of element (i.e. sway is expecting to decrease approximate 40%). The maximum force of the mooring cables increases with the increase of current speed, wave height, and water depth. The motion of immersed tunnel element increases with increase of wave height and water depth, and the current speed had little effect on it. At the immersion process condition, the maximum force of the cables decrease with the increase of immersion depth, and dramatically increase with the increase of wave height (i.e. the tension of cable F4 of pontoons at wave height of 1.5 m (83.3t) is approximately four times that at wave height of 0.8 m). The current speed has no much effect on the maximum force of the cables. The weight has little effect on the maximum force of the mooring cables, and the maximum force of hoisting cables increase with the increase of weight. The maximum value of six-freedom motion amplitude of the immersed tunnel element decreases with the increase of immersion depth, increase with the increase of current speed and wave height (i.e. the roll motion at wave height of 1.5 m is two times that at wave height of 0.8 m). The weight has little effect on the maximum motion amplitude of the immersed tunnel element. The results are significant for the immersion safety of element in engineering practical construction process.

• 한국자동차공학회논문집
• /
• 제18권4호
• /
• pp.8-17
• /
• 2010

In this paper, a fault tolerant control against sensor faults of electric parking brake (EPB) is proposed. Fault tolerant control method of EPB system is strongly demanded since sensor faults can endanger a driver's safety. In this paper, a clamp force estimation method is presented using motor's armature current and angular velocity. Clamp force estimation method is applied for fault detection method with parity equations. The goal of the detection method is to detect and identify faults in encoder, current sensor, force sensor, and parking cable. And a switching logic for fault tolerant control against the three sensor faults is suggested. Experimental results show that the proposed force estimation method satisfies the specifications of EPB system. The effectiveness of the fault detection method is validated with experimental results. Although a single sensor fault happens, EPB system with the proposed fault detection method does not develop into a failure on subsystem or system level.

• Wind and Structures
• /
• 제13권4호
• /
• pp.309-326
• /
• 2010

CFD techniques try to find their way in the bridge engineering realm nowadays. However, there are certain fields where they offer superior performance such as conceptual bridge design and bidding design. The CFD studies carried out for the conceptual design of a 425 m length cable-stayed bridge are presented. A CFD commercial package has been employed to obtain for a set of cross-sections the aerodynamic coefficients considering 2D steady state. Additionally, for those cross-sections which showed adequate force coefficients, unsteady 2D simulations were carried out to detect the risk of vortex shedding. Based upon these computations the effect on the aerodynamic behavior of the deck cross-section caused by a number of modifications has been evaluated. As a consequence, a new more feasible cross-section design has been proposed. Nevertheless, if the design process proceeds to a more detailed step a comprehensive set of studies, comprising extensive wind tunnel tests, are required to better find out the aerodynamic bridge behavior.

• Smart Structures and Systems
• /
• 제10권2호
• /
• pp.89-110
• /
• 2012

This study was intended to efficiently perform the probabilistic optimal safety assessment of steel cable-stayed bridges (SCS bridges) using stochastic finite element analysis (SFEA) and expected life-cycle cost (LCC) concept. To that end, advanced probabilistic finite element algorithm (APFEA) which enables to execute the static and dynamic SFEA considering aleatory uncertainties contained in random variable was developed. APFEA is the useful analytical means enabling to conduct the reliability assessment (RA) in a systematic way by considering the result of SFEA based on linearity and nonlinearity of before or after introducing initial tensile force. The appropriateness of APFEA was verified in such a way of comparing the result of SFEA and that of Monte Carlo Simulation (MCS). The probabilistic method was set taking into account of analytical parameters. The dynamic response characteristic by probabilistic method was evaluated using ASFEA, and RA was carried out using analysis results, thereby quantitatively calculating the probabilistic safety. The optimal design was determined based on the expected LCC according to the results of SFEA and RA of alternative designs. Moreover, given the potential epistemic uncertainty contained in safety index, failure probability and minimum LCC, the sensitivity analysis was conducted and as a result, a critical distribution phase was illustrated using a cumulative-percentile.

• Wind and Structures
• /
• 제27권6호
• /
• pp.357-368
• /
• 2018

For a long cable-stayed bridge, stay cables are its most important load-carrying components. In this paper, long-term monitoring of super-long stay cables of Sutong Bridge is introduced. A comprehensive data analysis procedure is presented, in which time domain and frequency domain based analyses are carried out. In time domain, the vibration data of several long stay cables are firstly analyzed and the standard deviation of the acceleration of stay cables, and its variation with time are obtained, as well as the relationship between in-plane vibration and out-plane vibration. Meanwhile, some vibrations such as wind and rain induced vibration are detected. Through frequency domain analysis, the basic frequencies of the stay cables are identified. Furthermore, the axial forces and their statistical parameters are acquired. To investigate the vibration deflection, an FFT-based decomposition method is used to get the modal deflection. In the end, the relationship between the vibration amplitude of stay cables and the wind speed is investigated based on correlation analysis. Through the adopted procedure, some structural parameters of the stay cables have been derived, which can be used for evaluating the component performance and corresponding management of stay cables.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.1254-1261
• /
• 2011

Application of long-span bridge, which is affected by parameters such as span length, shoe boundary condition, track property and stiffness of superstructure and substructure etc., can vary. Especially, by CWR aspects of the axial force, long-span high speed railway bridges are limited at type and span length. In this study, in terms of CWR axial force, the long-span high-speed railway bridges without REJ(Rail Expansion Joint) is to propose the bridge type. Various Parameters analysis performed for the proposed type(Arch bridge, Cable-stayed bridge).