• Proceedings of the Korean Institute of Resources Recycling Conference
• /
• 2006.05a
• /
• pp.150-155
• /
• 2006

제강공정에서 발생되는 $CaO-Al_{2}O_{3}-SiO_{2}$계 조성을 갖는 2 차 정련슬래그 (래들 슬래그)를 이용하여 하수슬러지용 고화재개발 및 하수슬러지 고화체의 물성에 관한 연구를 수행하였다. 래들슬래그는 냉각과정에서 분화되는 성질이 있어 냉각후 분말상의 슬래그가 만들어진다. 분말상 슬래그의 주 결정상은 $12CaO{\cdot}7Al_{2}O_{3}$ 및 $2CaO{\cdot}SiO_{2}$로 구성되어 있다. $12CaO{\cdot}7Al_{2}O_{3}$ 상은 속경성 시멘트의 특징이 있다. 또한 $CaSO_{4}$와 혼합사용시 ettringite 상을 형성시켜 하수슬러지의 함수율 저감효과 및 강도발현 효과가 우수한 결과를 얻었다. $Cl^{-}$ 이온의 고정화면에서는 고화재중 래들슬래그의 혼합비가 높을수록 고화체 구조내에 $Cl^{-}$ 이온이 고정화되어 용출량은 감소하였다. 고화재로서 제강부산물을 사용하기 때문에 경제성이 있으며, $Cl^{-}$ 이온 함량이 높은 하수슬러지 고화재로서의 재활용이 기대된다.

• Korean Journal of Materials Research
• /
• v.3 no.4
• /
• pp.410-421
• /
• 1993

Phase equilibria and reaction paths of the superconducting phases and other compatible phases at $850^{\circ}C$ in the Bi-Sr-Ca-Cu-O system were studied. $Bi_2O_3$ was added to $Sr_2CaCu_2O_x$ by 5% up to 40 mole% Bi in the pseudo-binary $Bi_2O_3-(Sr_2CaCu_2O_x)$ system and the heat treated samples were analysed using XRD. SEM, EDS. and DT A. When Bi contents were greater than 35 mole% Bi, liquid phase was formed which was compatible with $Bi_2Sr_2CaCu_2O_8$ phase. The m.p. of $Bi_2Sr_2CaCu_2O_8$ phase decreased as the content of (Sr+Ca)decreased. $Bi_{2+x}Sr_2CaCu_2O_8$ phase first segregated out of liquid phase around $Bi_2Sr_2CaCu_2O_8$ phase during cooling of liquid phase.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.21 no.2
• /
• pp.78-86
• /
• 2017

As the amount of slag generated annually increases, attempts to recycle slag as high value products are underway in order to develop an efficient resource recycling industry based on slag and derive economic benefits as well. However, the application of electric arc furnace (EOS) slag as construction material is practically limited because of the unstable substances included in it, such as free CaO.(EOS contains a small amount of free CaO, but several limitations still exist. Slag is stored for more than 3 months depending on the quantity of slag, which leads to additional economic loss. In this study, the amount of free CaO present in EOS is quantitatively evaluated to examine its qualities as a potential construction material and verify its application as concrete material. The quantitative analysis of free CaO present in EOS is performed using ethylene glycol. The free CaO contents of EOS samples were found to be below 0.5%. This satisfies the criteria specified in KS F 4571, which states that the CaO content should be below 40% and $CaO/SiO_2$ ratio should be below 2.0. In addition, it was confirmed that free CaO content difference appears to be dependent on the aging period and storage position.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.23 no.3
• /
• pp.124-128
• /
• 2013

In this research, cubic zirconia is synthesized with a refined CaO from shells as a stabilizer through Skull melting method. The proper process time and concentration are defined by Hydration reaction to produce the refined CaO after two different treatments using 0.1 mol% of HCl respectively with Cockle shell. The highest purity of CaO is reached when the shell is immersed in 1 mol% HCl. In Hydration reaction step, the pure $Ca(OH)_2$ is produced at $45^{\circ}C$ for 24 hours. The highest purity of CaO is measured when the $Ca(OH)_2$ is treated by heat at $1200^{\circ}C$ for 5 hours. The single crystals are grown through Skull melting method by adding the different contents of the refined CaO from 10 mol% to 30 mol% into $ZrO_2$. The frequency of High-frequency oscillator used for Skull melting method is 3.4 MHz. The descending speed of the single crystal is 3 mm/hour. The grown length of the single crystal is 4 cm. As a result of this study, 15 mol% of CaO has the best crystallinity.

• Journal of Conservation Science
• /
• v.31 no.3
• /
• pp.255-265
• /
• 2015

In this study, the potash glass beads of 281 samples in 30 sites analyzed until now were classified according to the chemical composition. And the color, size, manufacturing technique and distribution period were compared. Korea potash glass beads are divided into 3 types depending on the stabilizer content. I, II type is the CaO and $Al_2O_3$ content of less than 5%. Relatively, I type has a high CaO and II type has a high $Al_2O_3$. In contrast, III type comprises more than CaO 5%. I, II type is the saltpetre, III type is estimated using plant ash as row material of flux. A review of the properties by type, I type is cobalt blue, copper blue and purple beads. The outer diameter is sized to the range 1.4~7.4mm. Also it was produced by the drawing technique. It was used continuously from BC 1C until around AD 6C. On the other hand, II type is outer diameter of 1.9~3.6mm and a copper blue beads. manufacturing technique is the same as the I type. This seems to have been in use since around AD 1C to 4C. Finally, III type is brown, colorless, amber beads and an outer diameter of about 10mm. It was formed by winding technique and appeared in the tombs of Goryeo and Joseon Dynasty. As a result, 3 types of potash glass beads distributed in Korea is likely to flowing through the various trade routes from different provenances.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.29 no.1
• /
• pp.1-7
• /
• 2023

Chlorine dioxide (ClO₂) is widely used for post-harvest sterilization treatment. However, there are limitations in the retail application of ClO₂ due to difficulties in handling, expensive facilities, and safety concerns. Therefore, it is necessary to develop a ClO₂ technology that can be easily applied and continuously released for a long period. In this study, a series of ClO₂ self-releasing sachets were developed. First, poly(ether-block-amide) (PEBAX) and polyethylene-glycol (PEG) composite films containing different ratios of citric acid (CA) were prepared using the solution casting method. The as-prepared PEBAX/PEG-CA composite films were evaluated using FT-IR, DSC, and TGA to confirm chemical structure and thermal properties. Subsequently, PEBAX/PEG-CA composite films were designed in the form of a sachet and NaClO₂ powder was transferred into the sachet to achieve a ClO₂ self-releasing system. The ClO₂-releasing behavior of the sachet was investigated by measuring the release amount of the gas using UV-vis. The release amount of ClO₂ increased with increasing CA contents owing to the existence of higher protons (trigger) in the polymer matrix. Further, ClO₂ gas was released for a longer time. Therefore, the as-prepared smart sachet can be tuned according to applications and packaging sizes to serve an optimal sterilization effect.

• Journal of the Korean Ceramic Society
• /
• v.43 no.5 s.288
• /
• pp.284-292
• /
• 2006

$MgTiO_3{\cdot}CaTiO_3{\cdot}SrTiO_3$ system ceramics (MCST) were synthesized to study the effect of Ca addition amount and Sr substitution on temperature coefficient of resonance sequency. Temperature coefficient of resonance frequency was slightly increased by small amount ($i.e.{\sim}5%$) of Sr substitution. In case of 50% to 75% addition amount of $MgTiO_3$, decrease of quality factor was not observed with increasing dielectric constant.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.272-273
• /
• 2006

LTCC(low temperature co-fired ceramics)용 glass/ceramic 복합체를 제조하기 위해 4 종류의 borosilicate계 glass를 선정하고 filler로 $Al_2O_3$ ceramics를 filler 사용하여 30~50 vol% glass frit에 따른 소결 및 유전 특성에 대하여 조사하였다. Glass frit은 $SiO_2$와 $B_2O_3$ 함량비를 고정한 후 R(CaO, BaO, ZnO, $Bi_2O_3$)에 따라 유리 연화온도(Ts)와 함량이 소결에 미치는 영향 및 유전 특성 변화를 고찰한 결과, CaO-$B_2O_3-SiO_2$ glass의 경우 다량의 2 차상이 형성되었고, 이에 $900^{\circ}C$ 이하에서 완전 소결이 이루어지지 않았으며, BaO-$B_2O_3-SiO_2$ glass는 celsian($BaAl_2Si_2O_8$) 결정이 형성되면서 소결성의 저하를 갖고 왔으며, ZnO-$B_2O_3-SiO_2$ glass는 소결이 진행됨에 따라 주상이 $Al_2O_3$에서 gahnite($ZnAl_2O_4$) 결정이 형성되면서 품질계수가 크게 증가하였으며, $Bi_2O_3-B_2O_3-SiO_2$ glass는 45 vol%일 때 $900^{\circ}C$에서부터 일정한 선수축율 특성을 나타내었지만, 다량의 액상으로 인하여 유전 특성의 저하를 나타내었다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.06a
• /
• pp.848-851
• /
• 2009

석탄슬래그는 회분의 조성에 따라 고온에서 매우 상이한 슬래그 거동을 보여준다. 국내 가스화 대상탄으로 검토된 탄 중, 산성 산화물의 함량이 높아 고용융점을 갖는 7종의 석탄 회분을 가스화 조건인 고온, 환원분위기에서 점도 측정을 실시하였다. 4종의 탄에 대해서는 높은 점도를 낮추기 위하여 염기성 산화물인 CaO를 3가지 비율로 혼합하여 점도 측정을 실시하였다. 또한, flux의 혼합으로 인해 발생할 수 있는 결정체 형성을 FactSage 평형계산 프로그램과 CaO-SiO2-Al2O3 3성분계 상평형도를 이용하여 예측하였다. CaO가 첨가된 시료 모두에서 낮은 CaO 첨가비에서는 원래의 시료보다 낮은 점도를 보였으나, CaO첨가비가 20% 이상일 때는 anorthite이 형성되어 $T_{cv}$를 갖는 결정슬래그로 점도 거동이 변화하면서 실제조업 가능한 온도를 증가시켰다. 점도 측정 후 냉각된 시료의 SEM/EDX 분석을 통해 형성된 결정체를 관찰한 결과, FactSage와 상평형도에서 예측된 결정체와 유사하게 나타나 CaO-SiO2-Al2O3 3성분계 상평형도가 결정체 예측에 유용함을 확인하였다.

• Journal of the Korean Ceramic Society
• /
• v.34 no.2
• /
• pp.123-130
• /
• 1997

In this study, (Sr.Pb.Ca)TiO3-Bi2O3.3TiO2(SPCT) systems were investigated to develop a new material which has a high dielectric constant, a low dielectric loss and a small TCC(Temperature Coefficient of Capa-citance), and are suitable for high voltage applications as a function of the additions of Bi2O3.3TiO2 from 5 mol.% to 9 mol.%. The result obtained from our investigation showed that up to 6 mol.% Bi2O3.3TiO ad-dition the dielectric constant increased and it deteriorated at higher concentrations with increasing amount of the acicular grains. As a result of some dopants (SiO2, Nb2O3, MnO2) addition to SPCT, the specimens with MnO2 showed good dielectric properties. The dielectric constant decreased, but the TCC was improved with the addition of MnO2 from 0.15 wt.% to 0.45 wt. %.