• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.399-402
• /
• 2000

For improvement of B constant in $CaMnO_3$-$CaTiO_3$ perovskite type thermistors, effect of $Cr_2$$O_3$ addition ranged from 0.0wt% to 5.0wt% on electrical properties were investigated with contents and sintering temperatures in the view of crystal and microstructures. The solubility limit of Cr$_2$O$_3$was up to 0.5wt% judging from the result of lattice parameter. The grain size was decreased and the resistance at room temperature and B constant were increased with the addition of $Cr_2$$O_3$.On particular, B constant of$CaMnO_{3-x}$$Cr_2$$O_3$ system was increased greatly from 1574k to 2598k at 0.5wt% $Cr_2$$O_3$addition. Further addition of $Cr_2$$O_3$, however, resulted in the decrease of the resistance and B constant due to the $Cr_2$$O_3$ precipitation on the grain boundary. As the$CaTiO_3$contents increased in the $CaMnO_3$-$CaTiO_3$ system, the resistance at room temperature and B constant were highly changed.

• Journal of the Korean Ceramic Society
• /
• v.36 no.4
• /
• pp.410-416
• /
• 1999

The reactivity of three kinds of spinels which CaO-Al2O3-SiO2 slag was investigated in terms of mineral phases and microstructures. New crystal products were not formed by reaction of 12CaO.7Al2O3 in the slag with spinels and free MgO components was preferenctially dissolved into slag for MgO-rich spinel and stoichiometric spinel. Meanwhile mineral phase was changed from 12CaO.7Al2O3 to CaO.Al2O3 to CaO.2Al2O3 finally to CaO.6Al2O3 having high melting point for Al2O3 -rich spinel. The Fe-oxide component of the slag was taken up by only stoichiometric spinel grains within the spinel clinker and the trapped amount of Fe-oxide was independent of MgO content of MgO in spinel clinker the more th resistance to slag corrosion but the less resistance to slag penetration.

• Resources Recycling
• /
• v.20 no.3
• /
• pp.55-61
• /
• 2011

In order to develop economical production process from metallurgical grade silicon(MG-Si) to solar grade(SOG-Si), removal of boron by slag treatment was investigated at 1823 K using CaO-$SiO_2$ based slags. In the present study boron removal ratio in CaO-$SiO_2$ stags and $CaCO_3-SiO_2$ slags were increased to 63% and 73% respectively with slag basicity (%CaO/$%SiO_2$). However, bubbling time with Ar gas of slag and metal was not affected on removal ratio of boron. The addition of $Na_2CO_3$ to CaO-$SiO_2$ slags did not improve the removal ratio of boron from molten silicon. Boron contend was decreased from 20.6 ppm to 1.03 ppm by three times treatment using $CaCO_3-SiO_2$ slag (basicity=1.2).

• Journal of the Mineralogical Society of Korea
• /
• v.15 no.1
• /
• pp.59-68
• /
• 2002

Chemical analyses and Rietveld structural refinement with powder X-ray diffraction data were done for Nb-rich perovskite, named latrappite ($Ca_2NbFe^{3+}O_6$)from the Oka, Quebec, Canada. Latrappite is shown to be a member of a continuous solid solution of $CaTiO_3-NaNbO_3-Ca_2NbFe^{3+}O_6$ and approximately $(Ca_{1.5}Na_{0.4})\;(Nb_{0.1}Ti_{0.6}Fe_{0.4})O_6$ in composition. The crystal structure of latrappite, determined by Rietveld refinement, is similar to that of perovskite ($CaTiO_3$). It differs in that replacement of Ti by Nb and $Fe^{3+}$ results in greater distortion and tilting of the $TiO_6$ framework octahedra relative to $CaTiO_3$. Revised unit-cell parameters of latrappite are a=5.4474(4), b=5.5264(4), c=7.7519(5) ${\AA},\;V=233.4(3){\AA}^3$ space group Pbnm.

• Journal of the Korean Ceramic Society
• /
• v.31 no.6
• /
• pp.629-636
• /
• 1994

The ferrimagnetic glass-ceramics in the system Fe2O3-CaO-SiO2 for hyperthermia were investigated. Glasses could be prepared up to the content of 40 wt% of Fe2O3 and below the weight ratio of 1.0 of CaO/SiO2. The maximum saturation magnetization and the maximum coercive force were 29.85 emu/g and 340.1 Oe respectively, for a glass 40Fe2O3.20CaO.40SiO2 composition heat-treated at 95$0^{\circ}C$ for 8 hours. And for a glass 40Fe2O3.30CaO.30SiO2 composition the maximum saturation magnetization and the maximum coercive force were 18.47 emu/g and 374.4 Oe heat-treated at 1,00$0^{\circ}C$ and 90$0^{\circ}C$ for 8 hours respectively. The maximum hysteresis loss was 1,726.3 cal/g for a glass 40Fe2O3.20CaO.40SiO2 composition heat-treated at 95$0^{\circ}C$ for 8 hours. It was found that the ferrimagnetic Fe2O3.CaO.SiO2 glass-ceramics was little injurious to human body as results of biocompatibility test and biotoxicity test.

• Journal of the Korean Ceramic Society
• /
• v.29 no.5
• /
• pp.341-346
• /
• 1992

The effects of CaO addition on the low temperature degradation behavior of 2.5Y-TZP ceramics were investigated. Y2O3-CaO-ZrO2 ceramics were prepared from the commercial Y-TZP powder added within 1 mol% of CaO. Fully tetragonal phase could be obtained at each composition under sintering condition of 1500$^{\circ}C$ for 1 hour. As the amount of CaO increased, grain size was decreased. From the result of heat treatment at 200$^{\circ}C$, volume fraction of monoclinic phase formed on the surface of each specimen was decreased with higher CaO amount. Stability of tetragonal ZrO2 phase for low temperature heat treatment was increased by CaO addition without the degradation of mechanical properties.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.18 no.5
• /
• pp.184-190
• /
• 2008

$CaMoO_4$ crystals with ellipsoid, peanut, dumbbell, and notched sphere shapes were synthesized using a simple precipitation reaction. The morphology of $CaMoO_4$ crystals evolved from ellipsoids, through peanut-like structures and dumbbells, to notched spheres with increasing the concentration of $Ca^{2+}$ and $MoO_4^{2-}$ ions. This morphology evolution of $CaMoO_4$ crystals is attributed to a fractal mechanism. Branched crystal growth started at both ends of the ellipsoids. The peanut-like and dumbbell morphologies were formed by the first and second fractal growths, respectively. Finally, the notched spheres were formed by further fractal growth of dumbbells.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.11a
• /
• pp.371-374
• /
• 2004

저온동시 소성용(low temperature co-fired ceramics, LTCC) 마이크로파 유전체을 만들기 위해 $Ca(Li_{1/4}Nb_{3/4})O_3$ 마이크로파 유전체 세라믹스에 zinc-borosililcate glass를 첨가하여 소결 특성과 마이크로파 유전 특성을 조사하였다. $Ca(Li_{1/4}Nb_{3/4})O_3$과 $0.7Ca(Li_{1/4}Nb_{3/4})O_3-0.3CaTiO_3$에 zinc-borosilicate를 $5{\sim}30wt%$ 첨가하여 소결한 결과 $875{\sim}925^{\circ}C$에서 동시 소성이 가능한 것으로 확인되었으며 zinc-borosilicate glass의 함량이 증가할수록 저온에서 소성이 가능하였지만 과량의 액상과 2차상이 형성되면서 유전율과 품질계수가 저하되는 경향을 나타내었다. $Ca(Li_{1/4}Nb_{3/4})O_3$에 5wt%의 zinc-borosilicate를 첨가하여 $900^{\circ}C$에서 소성한 결과 가장 우수한 유전 특성$(\epsilon_r=17.45,\;Q{\times}f_0=5487)$을 나타내었고, 유전율을 높이기 위해 $CaTiO_3$를 0.3mol% 첨가한 $0.7Ca(Li_{1/4}Nb_{3/4})O_3-0.3CaTiO_3$에 10wt%의 zinc-borosilicate를 첨가하여 $925^{\circ}C$에서 소성한 결과 가장 우수한 유전특성$(\epsilon_r=44.92,\;Q{\times}f_0=5567)$을 나타내었다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.195-195
• /
• 2008

CAS계 유리에 $CaCO_3-Al_2O_3$ 혼합물 및 화합물을 10, 30 wt% 첨가하여 저온 소걸 및 마이크로파 유전 특성을 고찰하였다. CAS계 유리의 연화온도는 $841^{\circ}C$ 이며, CAS계 유리에 $CaCO_3$ 와 30 wt%의 $CaCO_3-Al_2O_3$ 혼합물을 melting되며, 10 wt%의 $CaCO_3$, $Al_2O_3$, $1CaCO_3-1Al_2O_3$ 혼합물 및 $CaAl_2O_4$ 화합물를 10 wt% 첨가하였을 때 $900^{\circ}C$ 이하에서 소걸이 가능하였다. 복합체의 XRD 상 분석 결과, CaCO3를 첨가하였을 때에는 모든 조성이 비정질을 나타내었고, $Al_2O_3$와 $1CaCO_3-1Al_2O_3$ 혼합물은 $Al_2O_3$ 결정상이 생성되었고, $CaAl_2O_4$ 화합물은 $CaAl_2Si_2O_8$의 hexagonal와 anorthite 결정상이 생성되었다. 따라서 CAS-10 (A, C-A, CA) 복합체는 $900^{\circ}C$에서 각각 유전율 ($\varepsilon_r$) 6.4, 6.9, 5.15 와 품질계수 ($Q^*f$) 2,400, 1,500, 3,000의 마이크로파 유전 특성을 나타내어 LTCC 기판 재료로 사용이 가능하며, 특히 $CaAl_2O_4$ 화합물을 사용하였을 때 가장 우수한 유전 특성을 나타내는 것을 확인하였다.

• Journal of the Korean Chemical Society
• /
• v.46 no.4
• /
• pp.336-345
• /
• 2002

In this study, we have screened $Eu^{3+}$- and $Tb^{3+}$-activated candidate phosphors for PDP in the sys-tems of CaO-Gd$_2$O$_3$-Al$_2$O$_3$ by combinatorial chemistry and investigated the synthetic temperature, optimum com-position and luminescent properties about the candidate phosphors. To construct the emission intensity library by VUV PL, we have synthesized 210 different compositional samples using a polymerized-complex method. Good luminescent samples were identified by X-ray diffraction method. $Ca_$\alpha$$G$d_{0.95-$\alpha$-$\beta$}Al_$\beta$O_$\delta$$ : Eu(0.02< $\alpha$+$\beta$ <0.04) phos-phors screened as a red phosphor have good color purity than commercial phosphor. In the candidate phosphors of CaGdAl$_3O_7$ : Tb, Ca$Al_{12}O_{19}$ : Tb, Gd$_4$Al$_2O_9$ : Tb, and Gd$_3Al_5O_{12}$ : Tb CaGdAl$_3O_7$ : Tb, and Ca$Al_{12}O_{19}$ : Tb have shorter decay time than commercial phosphor.