• Journal of Korean Society on Water Environment
• /
• v.24 no.1
• /
• pp.36-43
• /
• 2008

To develop the continuous water quality monitoring system using the daphnid Daphnia sp., the growth of test animal, sensitivity, and behaviour response of toxicants were observed. Growth of test animal significantly increased with increasing the food density under the 90~105 mg/L ($CaCO_3$) hardness, except the concentration of food (Chrollela sp.) was exceeded than optimal food supply. Behaviour responses of test animals were continuously analyzed by changes of fractal dimension value (FDV). The FDV sharply decreased after exposure to the concentrations of 0.13 mg/L copper, 0.06 mg/L lead, and 0.38 mg/L cadmium. In these concentrations, mortality and abnormal behaviour of daphnids exhibited within ca. 1.0-h after exposure. Comparison of 24-h $LC_{50}$ values with other zooplankton species indicated that sensitivity of the Daphnia sp. was higher than most zooplankton for lead, and brain shrimp, rotifer, and water flea (Ceriodaphnia dubia, D. magna) for copper, and brain shrimp, water flea (D. lumholzi), and amphipod for cadmium. Based on the above experimental results, significant relationship between toxicity and behaviour response of Daphnia sp. was supported the high potential of water quality monitoring system. Consequently, behavioural monitoring method in this study suggests a good estimation tool for detection of the discharged toxicants in water body and for ecotoxicological assessment aquatic organisms.

• KSBB Journal
• /
• v.5 no.4
• /
• pp.355-363
• /
• 1990

Methanol-utilizing bacterium isolated from sewage samples in Seoul showed optimal temperature and pH of $33^{\circ}C$ and 7.1 for growth, respectively. The maximum specific growth rate was $0.42hr^{-1}$. The minimum medium composition was reconstituted depending on the surplus and the deficit of each component in the basal medium at steady state. The optimal composition was given as(g/l); Methanol 40, $(NH_4)_2\;SO_42, \;KH_2PO_4\;1.5, \;K_2HPO_4\;0.2, \;H_3PO_4\;0.79, \;Na_2HPO_4{\cdot}12H_2O\;0.15, \;MgSO_4{\cdot}7H_2O\;1.5, \;FeSO_4{\cdot}7H_2O\;0.034, \;MnSO_4{\cdot}4H_2O\;0.005, \;CuSO_4{\cdot}5H_2O\;0.0027, \;CaCl_2{\cdot}2H_2O\;0.25, \;ZnSO_4{\cdot}7H_2O\;0.007, \;(NH_4)_6\;Mo_7O_{24}{\cdot}4H_2O\;0.00048, \;H_3BO_3\;0.00068, \;CoCl_2\; 0.00024$ Under the continuous culture with optimum medium the maximum cell productivity was 3.8g/1/hr at dilution rate $0.23hr^{-1}$. Maximum cell concentration and its protein content were 19.5g/l and 70% at dilution rate of $0.1hr^{-1}$, respectively.

• Applied Chemistry for Engineering
• /
• v.24 no.3
• /
• pp.239-246
• /
• 2013

Principle of foamed glass manufacturing process first starts with putting vitreous material powder into a mold. After the foaming calcination, foamed body should be annealed after separation from the mold. For this reason, existing manufacturing process could not be a continuous type process. In this study, in order to develop a continuous production process of foamed glass, the possibility of new foam glass manufacturing process was investigated by foaming calcination of the compact body obtained from compression-molding of vitreous raw materials in stead of using a mold. Through the experimental results of the foaming calcination of the compact body with adding various foaming agents such as $Na_2CO_3$, $CaCO_3$ and petroleum coke, into hydrated soda-lime vitreous raw materials, it was shown that developing a continuous process without using any molds for manufacturing foamed glass would be possible.

• Research in Plant Disease
• /
• v.21 no.1
• /
• pp.12-19
• /
• 2015

Antimicrobial activities of nano-materials were tested against several plant pathogens. Twelve different nano-materials were used to observe the antagonistic activity against three kinds of mold and sixteen different kinds of watermelon fruit rot pathogens (Acidovorax citrulli). According to the results, no antagonism have been found against the pathogen, Cylindrocarpon destructans. However in the case of Pythium ultimum, combination of Brass/Glucose 1,000 ppm confirmed the mycelial growth reduction by 94%. In addition, little effect was found against Rhizoctonia solani by Ag/Glucose 3,000 ppm. The remaining other nano-materials have different antimicrobial effect depending on the strains of A. citrulli. But in the case of lime (Cu/Salt 1,000 ppm) highest antimicrobial activity was observed with 97%. Moreover growth of five different strains of A. citrulli was checked by 99% with the combination of Ag/Glucose 1,000 ppm. 92% reduction of A. citrulli growth was observed with $Brass/CaCO_3$ 3,000 ppm. Tested nano-materials against different plant pathogens in this study showed the antimicrobial activity at the range of 24-70%.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.31 no.4
• /
• pp.413-422
• /
• 1995

Cavitation erosion-corrosion implies damage to materials due to the shock pressure or shock wave that results when bubbles form and collapse at a metal surface within a liquid. If the liquid is corrosive to the material, a condition typically encountered in industry, the component materials may suffer serious damage by a combination of mechanical and electrochemical attack. In this study, the mild steel(SS41) was tested by using the piezoelectric vibrator with 20kHz, 24$\mu$m to cavity generation apparatus. The damage behaviour of vibration cavitation erosion-corrosion and the environment characteristics were investigated in various solutions which are seawater, tap water and distilled water. The main results obtained are as follows; 1) The cavitation erosion-corrosion damage behaviour in the seawater increases to occur at the equal degree on the middle portion and the outside portion of specimen. The distilled water specimen, on other hand, occurs beginning on the outside portion across to the middle portion of specimen. 2) The cavitation erosion-corrosion damage in the tap water of low specific resistance more increases than that in the distilled water of high specific resistance at the initial testing time and more decreases than that in it by the CaCO sub(3) film with testing time. 3) Cavitation erosion-corrosion damage characteristic divides into four regions; incubation region, acceleration region, deceleration region and steady state region.

• Microbiology and Biotechnology Letters
• /
• v.13 no.3
• /
• pp.245-250
• /
• 1985

In order to increase citric acid productivity. several attempts were made; isolation and characterization of the mutant strain produced citric acid in a high yield, citric acid fermentation in a medium containing relatively higher amount of glucose and citric acid production by the use of semicontinuous ceil recycle system. By the treatment of Candide lipolytica S-109 with NTG, a mutant J-24 was selected as the highest producer of citric acid among the strains formed larger CaCO$_3$ lytic zone. it produced 72g/1 citric acid in 10％ glucose medium. Because mutant J-24 produced 85g/l citric acid and showed 53％ yield in 16％ glucose medium, several factors were adjusted to increase the yield in 16％ glucose medium. 0.8-1.0$\times$10$^{-3}$ P/C ratio, 0.15％ urea, 0.25％ yeast extract were suitable at citric acid production in 16％ glucose medium. Under this condition, J-24 strain produced 93g/l citric acid and showed 58％ yield. Semicontinuous cell recycle system was used to protons the effective production phase, to minimize the product inhibition and to shorten the lag phase. The productivity of semicontinuous cell recycle system was 0.79g/l h while that of batch system was 0.53g/l.h

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2020.12a
• /
• pp.61-61
• /
• 2020

This experiment was carried out using artificial bed soil and LED in the plastic film house(irradiation time: 07:00-17:00/day). Seedlings(n=63 per 3.3 m²) of ginseng was planted on May 17, 2018. LED was combined with red and blue light in a 3:1 ratio and irradiated with different light intensity(40-160 µmol/m²/s). Average air temperature from April to September according to the light intensity test was 20.4℃-20.9℃. Average artificial bed soil temperature was 20.1℃-21.7℃. The test area where fluorescent lamp was irradiated tended to be somewhat lower than the LED irradiation area. The chemical properties of the test soil was as follows. pH levels was 6.6-6.7, EC levels 0.9-1.3 dS/m and OM levels 30.6-32.0%. The available P₂O₅ contents was 73.3-302.3 mg/kg. Exchangeable cations K and Ca contents were higher than the allowable ranges and mg content was high in the fluorescent lamp treatment. The photometric characteristics of LED light intensity are as follows. The greater the light intensity, the higher the PPFD(Photosynthetic Photon Flux Density) value, illuminance and solar irradiation. Fluorescent lamp treatment had high illuminance value, but PPFD and solar irradiation were lower than LED intensity 40 µmol/m²/s treatment. The photosynthetic rate increased(2.0-3.8 µmolCO²/m²/s) as the amount of light intensity increased, peaking at 120 µmol/m²/s, and then decreasing. The SPAD (chlorophyll content) value decreased as the amount of light intensity increased, and was the highest at 36.1 in fluorescent lamp treatment. Ginseng germination started on April 5 and took 14-17 days to germinate. The overall germination rate was 68.8-73.6%. The growth of aerial parts(plant height etc.) were generally excellent in the treatment of light intensity of 120-160 µmol/m²/s. The plant height was 41.9 cm, stem length was 24.1 cm, leaf length was 9.8 cm and stem diameter was 5.6 mm. The growth of underground part (root length etc.) was the best in the treatment with 120 µmol/m²/s of light intensity. Due to the root length was long(24.8 cm) and diameter of taproot was thick(18.7 mm), the fresh root weight was the heaviest at 24.8 g. There were no disease incidence such as Alternaria blight, Gray mold and Anthracnose. Disease of Damping-off caused by Rhizoctonia solani occurred 0.6-1.5% and incidence ratio of rusty root ginseng was 30.8-62.3%. It is believed that the reason for the high incidence of rusty root ginseng is that the amount of field moisture capacity of artificial bed soil is larger than the soil. Leaf discoloration rate was 13.7-32.3%.

• Journal of Plant Biology
• /
• v.39 no.4
• /
• pp.295-300
• /
• 1996

The physiological effects of oligogalacturonic acid (OGA:D. P. 6-7), a product of acid hydrolysis of polygalacturonic acid (PGA), on ethylene biosynthesis in mung bean (Vigna radiata W.) hypocotyl segments was studied. Among PGA, OGA and monogalacturomic acid (MGA), only OGA stimulated ethylene production in mung bean hypocotyl segments, and the most effective concentraton of OGA was 50$\mu\textrm{g}$/mL. Time course data indicated that this stimulatiion effect of OGA appeared after 90 min incubation period and continued until 24 h. When indol-3-acetic acid (IAA) and 1-aminocyclopropane-1-carboxylic acid (ACC) were treated with OGA to investigate the mechanism of OGA on ethylene production, they did not show synergistic effects on ethylene production. The stimulation of ethylene production by OGA was due to the increase of in vivo ACC synthase activity, but OGA treatment had no effect of in vivo ACC oxidase activity. The effect of aminoethoxy vinyl glycine (AVG) and Co2+, the inhibitor of ethylene synthesis, was siminished a little by the OGA, but the treatment of Ca2+, known to increase ACC, with OGA did not increase the ethylene production, this effect seems to be specific for Ca2+ because other divalent cation, Mg2+, did not show the inhibition of OGA-indyuced ethylene production. It is possible that the OGA adopts a different signal transduction pathway to the ethylene bioxynthesis.

• Economic and Environmental Geology
• /
• v.32 no.5
• /
• pp.469-483
• /
• 1999

Two different types of deep groundwaters occur together in the Jungwon area: $CO_2$-rich water and alkali water. Each water shows distrinct hydrogeochemical and environmental isotopic characteristics. The $CO_2$-rich waters are characterized by lower pH(6.0~6.4), higher Eh (25~85mV) and higher TDS content (up to 3,300 mg/l), whereas the alkali type waters have higher pH (9.1~9.5), lower Eh (-136~-128mV) and lower TDS content (168~254 mg/l). The CO2-rich waters ($Pco_2$=up to 1atm) were probably evolved by the local supply of deep $CO_2$ during the deep circulation, resulting in enhanced dissolution of surrounding rocks to yield high concentrations of $Ca^{2+}, Na^+, Mg^{2+}, K^+\; and \;HCO_3\;^-$ under low pH conditions. On the other hand, the alkali type waters ($Pco_2$=about 10-4.6 atm) were evolved through lesser degrees of simple wate/rock (granite) interaction under the limited suppy of $CO_2$. The alkali waters are relatively enriched in F- (up to 14mg/l), whereas the F- concentration of$CO_2$-rich water is lower (2.2~4.8 mg/l) due to the buffering by precipitation of fluorite. The oxygen-hydrogen isotopes and tritium data indicate that compared to shaltion ($\delta$18O=-9.5~-7.8$\textperthousand$),two different types fo deep groudwaters (<1.0TU)were both derived from pre-thermonuclear (more than 40 years old) meteoric waters with lighter O-H isotopic composition ($\delta$18O=-9.5~-7.8$\textperthousand$) and have evolved through prolonged water/rock interaction. The $CO_2$-rich waters also show some degrees of isotopic re-equilibration with $CO_2$ gas. The $\delta^{34}S$ values of dissolved sulfates (+24.2~+27.6$\textperthousand$) in the $CO_2$-rich waters suggest the reduction of sulfate by organic activity at depths. The carbon isotope data show that dissolved carbon in the $CO_2$-rich waters were possibly derived either from dissolution of calcite or from deep $CO_2$ gas. However, strontium isotope data indicate Ca in the $CO_2$-rich waters were derived mainly from plagioclase in granite, not from hydrothermal calcites.

• The Korean Journal of Mycology
• /
• v.18 no.3
• /
• pp.149-157
• /
• 1990

Five strains of Armillaria mellea were collected from the forest of Chonbuk province and isolated from the tissue of fruit bodies. Nutritional and environmental characteristics of mycelial cultivation and rhizomorph production of Armillaria mellea isolated were determined in sawdust media, woody inocula and soils. The sawdust media of Styphnolobium japonicum, Culhamia simplex, Populus monilifera and Populua davidiana were proper for mycelial growth. The ranges of optimum pH, temperature and moisture content for mycelial growth were in the range of $4.5{\sim}5.0$, ${\sim}25^{\circ}C$ and $65{\sim}70%$, respectively. Among the various additives and inorganic salts added, 10% rice bran and 3% $CaCO_3$ were effective to mycelial growth. The woody inocula of Styphnolobium japonicum, Culhamia simplex, Quercus acutissima and Quercus veriabilis were proper for rhizomorph production. The ranges of optimum pH, moisture content and temperature for rhizomorph production were in the range of $4.5{\sim}4.9,$ $45{\sim}55%\;(w/w)$ and $20{\sim}24^{\circ}C$, respectively. Distribution of rhizomorphs in soil was varied with depth, but the main concentration occurred in the range of $7.5{\sim}12.5\;cm$. They were rarely found below 25.0 cm.