• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.31 no.3
• /
• pp.299-303
• /
• 1986

To provide useful information on the improving cultural practices of mungbean, investigations were made on Ca/Mg and (equation omitted) ratio in soil and plant grown under three fertilizer levels of N, P, K with different upland soils, using variety, Kyonggijaerae 5. Highly significant possitive correlations were observed between the soil extracted molar Ca/Mg ratio, (equation omitted) ratio at flowering time and yield, number of pods per plant, respectively. Soil-extracted Ca/Mg ratio at flowering time ranged from 1.9 to 6.4 and (equation omitted) ratio ranged from 0.17 to 0.33. Yield decreased rapidly as extracted soil Ca/Mg ratio became smaller than the ratio of 3.9, and yield was the highest the (equation omitted) ratio adjusted to 0.23 at flowering time. At harvesting time, Ca/Mg ratio in plant ranged from 1.4 to 4.3 and the yield decreased rapidly as Ca/Mg ratio in plant became smaller than 2.6. Yields, however, were not related to the soil-extracted Ca/Mg ratio interval from 3.9 to at least 6.4 in flowering time and Ca/Mg ratio in plant ranged from 2.6 to 4.3 at harvesting time.

• The Korean Journal of Zoology
• /
• v.17 no.2
• /
• pp.93-102
• /
• 1974

Fragmente dsarcoplasmic reticulum of rabbit skeletal muscle was prepared and biochemical properties of its ATPase activity were studied. The ATPase of the fragments could be distinguished as $Mg^++ - ATPase and (Mg^++ - Ca^++)$-ATPase. The activity of $(Mg^++ - Ca^++)$-ATPase was predominant over that of $Mg^++$-ATPase in the temperature range of $0 \\sim 40^\\circ C$ and in the pH 6.4$\\sim$7.6. At higher temperatures the predominance of $(Mg^++ - Ca^++)$-ATpase was far greater. The apparent energies of activation were 14 kcal/mole for $Mg^++$-ATPase, 21kcal/mole for $(Mg^++ - Ca^++)$-ATPase, and 18kcal/mole for total ATPase. Changes in pH and Mg concentration did not alter the energies of activation of these ATPases. The Km values of these ATPases were found to be 0.36 mM for $Mg^++$-ATPase, 2.20 mM for $(Mg^++ - Ca^++)$-ATpase, and 0.86 mM for total ATPase.

• Korean Journal of Food Science and Technology
• /
• v.29 no.5
• /
• pp.1071-1074
• /
• 1997

The Effect of $Ca^{++}$, $K^+$ and $Mg^{++}$ on salting of radish was investigated. Up to 0.2 M of $Ca^{++}$ and/or $K^+$, sodium chloride content of radish increased respectively, comparing with no addition of these ions. The salting effect of radish incereased in proportion to the concentration ($0{\sim}0.01\;M$) of $Ca^{++}$ and/or $K^+$ in the salting solution up to 0.2 M, while there was no influence of $Mg^{++}$. When $Mg^{++}$ and $Ca^{++}/Mg^{++}$ and $K^+$ were added to brine solution, $Ca^{++}$ or $K^+$ influenced the salting effect of radish and $Mg^{++}$ did not.

• Korean Journal of Materials Research
• /
• v.9 no.6
• /
• pp.547-550
• /
• 1999

Optical and electrical properties of MgO-CaO films as a protective layer for AC plasma display panel were studied. When the [(CaO/(MgO+CaO)] ratio of evaporation starting materials was optimum composition, 0.1, firing voltage and memory margin of the film were 176V and 0.5, respectively. When [CaO/(CaO+MgO)] was 0, 0.1 and 0.2, memory margin was 0.39, 0.5 and 0.41, respectively, and surface roughness of films was $27.7\AA$, $21.1\AA$ and $40.3\AA$, respectively. It was thought that memory margin had a reverse-relation with surface roughness. The density of film was calculated by measuring the refractive index of film. The density of MgO film was 3.21g/㎤ and the density of film, when [CaO/(CaO+MgO)] was 0.1, was 3.632g/㎤. The mixture of MgO-CaO films showed a good transmittance property in the visual range.

• Horticultural Science & Technology
• /
• v.32 no.6
• /
• pp.762-770
• /
• 2014

This study was conducted to elucidate the influence of prohexadione-calcium (Pro-Ca) application on shoot growth and fruit quality in 'Fuji'/M.9 mature apple trees. Pro-Ca was applied at concentrations ranging from 100 to $400mg{\cdot}L^{-1}$ one time at petal fall (PF; 5-10 cm terminal shoot growth) to the whole canopy of the tree, or at 100, 125, $150mg{\cdot}L^{-1}$ concentrations two times, at PF and then 4-8 weeks after PF. Pro-Ca treatment generally reduced mean shoot growth, with its effect being proportional to the application rate. Pro-Ca at $400mg{\cdot}L^{-1}$ significantly reduced the shoot growth by 15-22% compared to the control, while its effect was not significantly different from Pro-Ca $200mg{\cdot}L^{-1}$. Pro-Ca treatments induced higher occurrence of secondary growth compared to the control. Pro-Ca treatment increased the photosynthetic rate by 5-10% relative to the control, and also increased soluble solid concentration and fruit red color. However, fruit weight was significantly reduced by $400mg{\cdot}L^{-1}$ Pro-Ca, which was attributable to the greater secondary growth caused Pro-Ca $400mg{\cdot}L^{-1}$ treatment compared to the control and Pro-Ca $200mg{\cdot}L^{-1}$ treatment.

• Korean Chemical Engineering Research
• /
• v.59 no.4
• /
• pp.611-625
• /
• 2021

Mg crowns were manufactured using domestic dolomite (Ca·Mg(CO₃)₂) (20~30 mm). In order to manufacture the calcined dolomite (CaO·MgO), (a) electric furnace (950 ℃, 480 min) and (b) microwave furnace (950 ℃, 60 min) processes were used. As a result of XRD analysis, it was analyzed as (a) CaO 56.9 wt%, MgO 43.1 wt% by electric furnace process and (b) CaO 55 wt%, MgO 45 wt% by microwave furnace process. Even when the decarbonation reaction time of dolomite was shortened by 1/8 in microwave furnace process compare with electric furnace process, the calcined dolomite could be produced. The hydration reaction (ASTM C 110) is a standard for the hydration reactivity of calcined dolomite, and the calcined dolomite produced by electric furnace process showed a high hydration reactivity (max temp 79.8 ℃/1.5 minutes). Such hydration reactivity was occurred by only CaO hydration reaction and that was confirmed by XRD analysis. The calcined dolomite produced by microwave furnace process showed low hydration reactivity (max temp 81.7 ℃/19.5 minutes). Such low hydration reactivity was occurred by CaO and MgO hydration reaction due to the hydration reaction of CaO thereafter occurring of the hydration reaction of MgO, and that was confirmed by XRD analysis. The prepared Mg crown were 58.8 g and 74.6 g by electric furnace and microwave furnace processes, respectively, under the reaction conditions of 1,230 ℃, 60 min, 5 × 10^-2 torr by silicothermic reduction.

• Clinical and Experimental Pediatrics
• /
• v.52 no.10
• /
• pp.1140-1146
• /
• 2009

Purpose:The pathophysiology of magnesium, the second highest common compound in humans, is still unclear, especially in preterm babies. We accessed the association between total magnesium (tMg), ionized Mg (iMg), and gestational age (GA) and that between serum magnesium (sMg) and intraventricular hemorrhage (IVH) in preterm babies. Methods:In all, 119 inborn preterm infants admitted between July 2006 and February 2008 were divided into the IVH group (19) and the control group (100) and were prospectively analyzed. TMg, iMg, pH, total calcium (tCa), and ionized Ca (iCa) levels were determined immediately after delivery or within 3 hours after birth, and their correlation with GA were investigated. Results:TMg was not correlated with GA, tCa, iCa, and pH. IMg was correlated with tMg (r=0.288, P=0.002) and iCa (r=0.212, P=0.021); however, it was not correlated with GA and pH. Mean GA and birth weight were significantly lower (P=0.002) and smaller (P=0.030) in the IVH group. Mean sMg was higher in the IVH group ($2.5{\pm}0.9mg/dL$) than in the control group ($2.1{\pm}0.6mg/dL$) (P=0.021). SMg was a risk factor even after logistic regression analysis (OR, 2.798; 95% C.I., 1.265-6.192; P=0.011). Conclusion:In less than 37-week-old preterm babies, tMg and iMg were similar, regardless of GA. High sMg may be a risk factor for IVH in premature babies, regardless of their exposure to antenatal magnesium.

• Journal of Korea Foundry Society
• /
• v.40 no.2
• /
• pp.7-15
• /
• 2020

The high-temperature stability of Mg-8.0Zn-1.6Y (wt.%) alloys upon the addition of Ca has been investigated by characterizing the ignition temperature, microstructure, tensile and creep properties. The ignition temperature increases with an increase in the Ca content, indicating that an addition of Ca enhances the ignition resistance of the Mg-Zn-Y alloy. The as-cast microstructures of all tested alloys mainly consisted of the dendritic α-Mg matrix and I-phase (Mg₃Zn₆Y) at the grain boundaries. In the Ca-added Mg-8.0Zn-1.6Y alloys, the Ca₂Mg₆Zn₃ phase forms, with this phase fraction increasing with an increase in the Ca contents. However, a high volume fraction of the Ca₂Mg₆Zn₃ phase rather deteriorates the mechanical properties. Therefore, a moderate amount of Ca element in Mg-8.0Zn-1.6Y alloys is effective for improving the tensile and creep properties of the Mg-Zn-Y alloy. The Mg-8.0Zn-1.6Y-0.3Ca alloy exhibits the highest tensile strength and the lowest creep strain among the alloys investigated in the present study. The creep resistance of Mg-Zn-Y-Ca alloys depends on the selection of the secondary solidification phase; i.e., when Ca₂Mg₆Zn₃ forms in an alloy containing a high level of Ca, the creep resistance deteriorates because Ca₂Mg₆Zn₃ is less stable than the I-phase at a high temperature.

• Korean Journal of Materials Research
• /
• v.9 no.6
• /
• pp.622-629
• /
• 1999

Effects of the fluorination in the $K_2$TiF\ulcorner solution and in-situ KF+ KOH electrolyte on the electrochemical charge-discharge properties of CaNi\ulcorner and the Mg-CaNi\ulcorner electrodes were investigated. In-situ fluorination in the KF+ KOH electrolyte compared with pre-fluorination in the$ K_2$TiF\ulcorner solution could improve the electrochemical cycling durability of CaNi\ulcorner and MG-CaN\ulcorner electrodes. The fluorinated layer on the alloy surface by pre-fluorination to improve the activity and anti-corrosion of the electrodes was dissolved in the pure KOH electrolyte during the cycling. The fluorinated layer was formed continuously on the surface of the electrode by thee2N KF addition in the 6N KOH electrolyte. The excess F\ulcorner ion addition in KOH electrolyte could improve the electrochemical cycling durability of CaNi\ulcorner and Mg-CaNi\ulcorner electrode. But, in case of MG-CaNi\ulcorner electrode, the discharge capacity of the electrode was reduced and the poor cycling property was shown with increasing of the MG process times.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.10 no.1
• /
• pp.139-147
• /
• 1983

This study was undertaken to evaluate the physiological roles & mechanism of $Ca^{++}$-ATPase & $Mg^{++}$-ATPase in human dental pulp. Each specimen of dental pulp was obtained from the freshly extracted, freeze-dried 242 teeth. $Ca^{++}$-ATPase & $Mg^{++}$-ATPase activity were measured by the release of inorganic phosphate & protein with Spectrophotometer. The results were as follows; 1. The $Ca^{++}$-ATPase & $Mg^{++}$-ATPase activity were significantly increased in developing teeth. 2. The $Ca^{++}$-ATPase & $Mg^{++}$-ATPase activity were significantly decreased in nonvital teeth. 3. The $Ca^{++}$-ATPase & $Mg^{++}$-ATPase activity were significant decreased in deciduous teeth. 4. The $Ca^{++}$-ATPase & $Mg^{++}$-ATPase activity didn't have relation with dental caries. 5. The $Ca^{++}$-ATPase & $Mg^{++}$-ATPase were activated by either $Ca^{++}$ alone or $Mg^{++}$ alone.