• Journal of The Korean Digital Architecture Interior Association
• /
• v.11 no.3
• /
• pp.35-42
• /
• 2011

The exterior system of buildings, which is the typical curtain wall, has been made with glass and metal. Theses materials, however, have weaknesses such as inadequate insulating quality, short durability, combustibility and toxic substance. On the other hand, Autoclaved Aerated Concrete(AAC) or Autoclaved Lightweight Concrete(ALC) possess the great energy efficiency and the superb insulating quality as substitute of existing exterior system materials. In this research, strength characteristics and bubble dispersion of hydrothermal synthesis process of AAC based on CaO/$SiO_2$(C/S) ratio are analyzed. C/S ratio is determinated and bubble distribution and compressive strength are studied through the test of varied water-to-solid mineral ratio(W/S). In hydrothermal synthesis program, final C/S ratio is determined as 0.7 consider of the manufacturing process and hydrothermal synthesis is done at $180^{\circ}C$ for 7 hours. The analysis shows slurry has about 2,300cP viscosity and 0.56 specific gravity therefore it is expected AAC has the appropriate facility in the manufacturing process and Hydrates of AAC's Expansion.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.4
• /
• pp.1-9
• /
• 2020

This study conducted to understand effects of CA (CaAl₂O₄) and CA₂ (CaAl₄O₇) ratio on chloride binding ability and compressive strength and pore structure of cement mortar incorporating mixture of CA and CA₂. The Portland cement based specimens were mixed with the clinkers CA and CA₂, and these calcium aluminate clinker mixture were replaced 0, 5, 10% by weight of cement. After all the test specimens were cured for 28 days under water curing, they were immersed in the distilled water and NaCl solution. As a result, 28 days compressive strength of all specimens was similar, and As the replacement ratio of calcium aluminate clinker in the specimen increased, Friedel's salt production tended to increase. However, it was dependent on the amount of Al₂O₃ in the level of 5% replacement and CA ratio in the level of 10% replacement. Through equilibrium isotherm result, it was also indicated that as replacement ratio of calcium aluminate clinker in cement matrix increased, chloride binding capacity was improved, and chloride penetration was suppressed. In this study, the specimen replaced with 10% of the calcium aluminate clinker mixture (CA 39%, CA₂ 60%) was remarkable to control chloride attack. We figured out necessity to understand optimal CA/CA₂ ratio to effectively apply CA₂ as a sustainable building material by improving the chloride binding ability in Portland cement based system.

• The Korean Journal of Physiology and Pharmacology
• /
• v.3 no.2
• /
• pp.207-213
• /
• 1999

To examine individual variation in drug metabolism catalyzed by flavin-containing monooxygenase (FMO), 179 Korean volunteers' urinary molar concentration ratio of theobromine (TB) and caffeine (CA) was determined. Their urine was collected for 1 hr (between 4 and 5 hrs) after they drank a cup of coffee containing 115 mg CA and analyzed by an HPLC system. The lowest TB/CA ratio obtained was 0.40, the highest ratio was 15.17 (38-fold difference), and the median ratio for all subjects was 1.87. The mean was 2.66 with 2.36 S.D.. In 134 nonsmokers, the mean ratio was $2.35{\pm}1.93,$ that of 51 males was $2.30{\pm}2.26$ and 83 females was $2.37{\pm}1.85,$ respectively. There was no significant gender difference in the obtained TB/CA ratio (Mann-Whitney test; p=0.518). There were no smokers among the 83 female volunteers. In the remaining 96 male subjects, the ratio obtained in 51 nonsmokers was $2.30{\pm}2.06$ and that of 45 smokers was $3.62{\pm}3.19.$ This indicated that the TB/CA ratio was increased significantly in smokers (p=0.007). However, when the TB/CA ratios (FMO activity) obtained in all 179 Korean volunteers are compared with the urinary concentration ratios of paraxanthine (PX) plus 1,7-dimethylurate (17U) to CA (CYP1A2 activity), there was a weak but significant correlation (Pearson's correlation coefficient test; $r^2=0.28,$ p＜0.0001). This indicates that, although the urinary TB/CA ratio mostly represents FMO activity, minor contribution by CYP1A2 activity cannot be ignored. In conclusion, the FMO activity measured by taking the urinary TB/CA ratio from normal healthy Korean volunteers shows marked individual variations without significant gender differences and the increased TB/CA ratio observed in cigarette smokers may have been caused by the increased CYP1A2 activity.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.9 no.1
• /
• pp.26-33
• /
• 1989

This pot experiments were conducted to find out the optimal fertilization ratios of the N:S:P anions and K:Ca:Mg cations of major nutrients in an orchardgrass/ladino clover mixed sward. The optimum ratios in equivalent basis were computed by the Homes systematic variations technique. The soil samples were collected from the newly reclaimed soils, which are located on colluvial hilly area with a good consideration for the hilly pasture development. The results were summarized as follows; 1, the optimum fertilization ratios of major nutrients for the high yields by the forage species in a mixed sward were obtained (Table 4 in detail); N:S:P = 3:l: 1 and K:Ca:Mg = 1:l: 1 for grass and grass plus legume, and N:S:P = 1:6:43 and K:Ca:Mg = 1: 3: 1 for legume in general. 2. The yield increases from the systematic variations in this mixed sward were laid in following order; N > P >S-group and K >Mg >Ca-group for grass and grass plus legume, and P >S >N-group and Ca >Mg > K-group for legume. Especially, the yields were greatly increased at the N-group for grass, and at the Pand Ca-groups for legume. 3. Soil pH-value was descreased at the Sgroup, and somewhat increased at the Ca- and Mg-groups. The content of available $P_2O_5$, CEC and base saturation were greatest with the Ca-group. 4. At the N-group, the N-contents were highest and the P-contents were lowest in grass and grass plus legume, which resulted in the highest Ca/P ratio of 2.15 among the anion groups. Whereas the highest Ca/P ratio of 9.20 in legume was obtained at the Ca-group. Legume showed in general higher Ca/P ratio and lower K/(Ca+Mg) ratio than these in grass. 5 . There were differences in the effects of systematic variations of major nutrients on the dry matter yields and the mineral yields. The optimum fertilization ratios of anions and cations for the high mineral yields were obtained (Table E), which showed differences comparing with the ratios for the high dry matter yields. The antagonis between the cations K and Mg was known from the point of mineral yields of mixed forages.

• Clean Technology
• /
• v.3 no.1
• /
• pp.96-105
• /
• 1997

The objectives of this study were to investigate $SO_2$ removal efficiency of anthracite - bituminous coal blend combustion in a fludized bed coal combustor with Ca/S, anthracite ratio, bed temperature, and waste paper sludge particle size. The experimental results were presented as follow ; the effect of the desulfurization by the particle size of waste paper sludge was a great and $SO_2$ removal efficiency was heigest in paper sludge dia $1016{\mu}m$. And the difference of $SO_2$ removal efficiency according to air velocity was not too large. As Ca/S mole ratio incresed, $SO_2$ removal efficiency incresed rapidly up to Ca/S mole ratio 3 while the desulfurization rates did not increse too largely in the range of more than the level. The bed temperature had a great deal of effect on the desulfurization rate. So the $SO_2$ removal efficiency was a graet using waste paper sludge that the properbility of paper sludge as sorbent was conformed.

• Clean Technology
• /
• v.25 no.4
• /
• pp.311-315
• /
• 2019

The cation extraction and impurity separation were studied in order to investigate the recyclability of a slag produced from the steel refinery industry. Two types of slag (Slag-A, B) were collected and characterized in this study. The initial characterization by X-ray diffraction (XRD) and X-ray fluorescence (XRF) confirmed the existence of various kinds of ions in the slag such as Ca²⁺ (30 ~ 40%), Fe³⁺ (20 ~ 30%), Si⁴⁺ (15%), Al³⁺ (10%), Mn²⁺ (7%), and Mg²⁺ (3 ~ 5%). Inductively coupled plasma atomic emission spectroscopy (ICP-AES) analysis on the extracted slag using 2 M HCl as a solvent indicated that a higher concentration of Ca²⁺ was extracted as the S/L ratio was increased. The Ca²⁺ extraction concentration were found to be 8,940 mg L^-1 (Slag-A) and 10,690 (Slag-B) mg L^-1 when the S/L ratio for Ca²⁺ extraction was 0.1. However, the extract was strongly acidic ( < pH 1) at 0.1 S/L. Also the other ions (impurities) were extracted simultaneously in addition to Ca²⁺. To increase the purity of Ca²⁺ in order to transform the slag to a high value resource, a pH-swing was conducted. The impurities tended to precipitate at higher rate as the pH was increased. Notably, the Ca²⁺ rapidly precipitated above a certain pH and at a pH of 10.5, while the selectivity of Ca²⁺ was over 99%. It is expected that the aqueous solution in which high contents of Ca²⁺ was selectively dissolved in this study would be suitable for the carbonation process for reducing CO₂ and for the production of calcium carbonate.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2004.08a
• /
• pp.55-62
• /
• 2004

In this study, the effects of Ca content and processing variables on hot rolling properties of gravity cast AZ31-xCa alloys were evaluated systematically. The number and length of side crack were decreased with increasing preheating temperature and decreasing reduction ratio per pass and Ca content. The UTS and YS were not strongly dependent on the Ca content but the elongation decreased with increasing Ca content. The decrease of elongation in Ca containing alloys was least when the sheets were fabricated under preheating temperature of $400^{\circ}C$ and reduction ratio per pass of $15\%$. The sheets had the sound external features with little side cracks by homogenization of gravity cast AZ31-xCa alloys before hot rolling. In the cases of AZ31-xCa alloys containing under $1wt.\%$ Ca, the annealed sheets after homogenization and hot rolling had the similar tensile properties to those of AZ31 sheet.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.15
• /
• pp.6239-6241
• /
• 2014

Purpose: To compare the diagnostic accuracy of the neutrophil/lymphocyte ratio (NLR) with the platelet/lymphocyte ratio (PLR) in predicting malignancy of pelvic masses which are pre-operatively malignant suspicious. Materials and Methods: In this retrospective study we evaluated the clinical features of patients with ovarian masses which had pre-operatively been considered suspicious for malignancy. The patients whose intraoperative frozen sections were malign were classified as the study group, while those who had benign masses were the control group. Data recorded were age of the patient, diameter of the mass, pre-operative serum Ca 125 levels, platelet count, neutrophil/lymphocyte ratio and platelet/lymphocyte ratio. Results: There was statistically significantly difference between the groups in terms of age, diameter of the mass, serum Ca 125 levels, platelet number and platelet/lymphocyte ratio. Mean neutrophil/lymphocyte ratios showed no difference between the groups. ROC curve analysis showed that age, serum Ca 125 levels, platelet number and PLR were discriminative markers in predicting malignancy in adnexal masses. Conclusions: According to the current study, serum Ca 125 levels, pre-operative platelet number and PLR may be good prognostic factors, while NLR is an ineffective marker in predicting the malignant characteristics of a pelvic mass.

• Journal of Nutrition and Health
• /
• v.26 no.5
• /
• pp.524-531
• /
• 1993

In this experiment, we investigated the changes of erythrocyte feature and Ca concentration in rat fed the diet containing different common oils in Korea for different feeding periods(4 weeks or 12 weeks), using Korea sesame oil, perilla oil, rice bran oil and mixed oil. W-3/w-6 ratio of each group was 0.001, 1.44, 0.03 and 0.112, respectively. P/S ratio of each group was 9.64, 10.49, 5.58 and 1.68, respectively. Perilla oil(w-3 rich) increased w-3/w-6 ratio of erythrocyte membrane, decreased the amount of trapped Ca and inhibited the decrease of cell volume. These results indicate that in maybe increase erythroyte fluidity and deformability, and affect erythrocyte function. In conclusion, w-3 rich perilla oil affects erythrocyte feature.

• Journal of the Korean Ceramic Society
• /
• v.28 no.5
• /
• pp.373-382
• /
• 1991

The effect of Ca/P mole ratio (Ca/P=1.60, 1.67, 1.75) in the initial solution on the mechanical properties of alumina added hydroxyapatite was investigated. Hydroxyapatite was synthesized by precipitation method using Ca(NO3)2$.$4H2O and (NH4)2HPO4 as starting materials and 5 wt% of ${\alpha}$-Al2O3 was added to precipitation solution. The powder was calcined at 800$^{\circ}C$ and sintered at 1,150∼1,400$^{\circ}C$ under water vapor atmosphere. With the increasing of Ca/P mole ration in the initial solution, the amount of tricalcium phosphate formed from the decomposition of hydroxyapatite reduced and the sinterability and mechanical properties were increased. The bending strength and Vickers hardness of the specimen sintered at 1,300$^{\circ}C$ with the Ca/P mole ratio of 1.75 in the initial solution were 230 MPa and 650 kg/$\textrm{mm}^2$, respectively. The improvement of mechanical properties was attributed to not only the effect of Ca/P mole ratio but also the strengthening of sintered body by Al substitution for P ions.