• Journal of the Korea Fashion and Costume Design Association
• /
• v.6 no.1
• /
• pp.73-87
• /
• 2004

In the designing stage, the HANBOK CHIMA is created using a flat pattern with linear shapes. However, when worn, the skirt creates a fluid and organic silhouette. According to the wearing method(wrapping), HANBOK CHIMA can create various shapes and movements. In comparison to the general skirt, It is more effective in revealing the wearer's sense of beauty. The method of wrapping the skirt from the rear is a suitable way of wearing the garment in accord with the Korean ON-DOL(온돌) culture and it creates mystique eroticism. We can devide the silhouettes according to six different period of time. The silhouette of HANBOK CHIMA is affected by the following elements: length, width, pleats, textures and the usage of underwear. [1. Koguryo (5C∼6C) - The first Tent silhouette. 2. The South Dynasty Silla (7C∼8C) - The second Tent silhouette. 3. Kyoryo dynasty (l4C) - Cylinder silhouette. 4. The first Chosun dynasty (late 14C∼17C) - Bell silhouette and Cylinder silhouette. 5. The second Chosun dynasty (mid 18C∼mid 19C) - Bell silhouette and Barrel silhouette. 6. The third Chosun dynasty (late 19C∼the beginning of 20C) - Tent, Cylinder and Bell silhouette.]

• The KIPS Transactions:PartC
• /
• v.11C no.1
• /
• pp.1-10
• /
• 2004

Proxy signature schemes based on delegation of warrant are frequently studied in these days. Proxy signatures are signature schemes that an original signer delegates his signing capability to a proxy signer, and the proxy signer creates a signature on behalf of the original signer. Proxy signatures are fundamentally accomplished by the process that original signer creates the signature about the proxy information and transmits to the proxy signer for using by the proxy key. There are several security requirements for using the proxy signature schemes. In this paper we suggest the proxy-register protocol scheme that original signer registers to the verifier about the proxy related information. In our scheme, verifier verifies the signature that original signer creates about the proxy information and sets the warrant of proxy signer, validity period for proxy signature and some limitation. At the same time, all security requirements that were mentioned in previous schemes are satisfied. We also show the advantages of our suggestion by comparing with the previous proxy signature schemes.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.25 no.4
• /
• pp.49-62
• /
• 2022

Borehole Data is geotechnical information provided so that workers can safely perform construction at the field. It creates 3D data and supports viewing as a 3D image. Currently, all Korean companies that develop programs using 3D visualization use the MVS program developed by C Tech Development Corporation. However, the MVS program is a commercial program, and it is difficult to use MVS in 3D related programs developed by Korean Companies. In this paper, we propose to develop a program that can replace MVS to generate a 3D stratum model from clustered borehole information using Python's Gempy open-source. The 3D stratum model program can creates point data for each stratum and can creates a surface for each stratum through interpolation. Then, the 3D stratum model program is completed by merging the surfaces of each stratum. It was confirmed that there was no difference when a 3D model was created and compared with the MVS program and the proposed program from the borehole data of a Goyang area.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.10 no.4
• /
• pp.329-336
• /
• 2008

Efficient traffic network is required in urban area for good living condition. However, dense traffic network creates traffic jam and gives bad influences to the ground environment. Therefore, advanced use of underground and tunnel is required. But, in the last 20 years many tunnel fire accidents have occurred all over the world. Increase of tunnels and increase of traffics result in increase of tunnel fire. Tunnel fire creates damage to people and to the tunnel structure. Also, tunnel fire creates a big economical loss. In a mountain tunnel, the stability of the tunnel will not be disturbed by fire although the tunnel lining will get a severe damage. However, in a shield tunnel or immersed tube tunnel, cut and cover tunnel, there is a high possibility that tunnel itself will collapse by fire because their tunnel concrete lining is designed as a structural member. The aim of this experimental research is to verify the fire protection performance of newly developed cementitious material compared with the broadly used existing products in Europe and Japan. For the experiments, the general NATM tunnel concrete linings with the newly developed material were tested using fire loading curve of RABT (Maximum peak temperature is $1,200^{\circ}C$) and RWS (Maximum peak temperature is $1,350^{\circ}C$). From the test results, the newly developed fire protection material applied with 30 mm thickness showed good fire-proofing performance under RABT fire loading.

• Journal of computational fluids engineering
• /
• v.11 no.4 s.35
• /
• pp.48-55
• /
• 2006

A computational study was carried out in order to investigate aerodynamic characteristics on leading edge sweepback angles of Flying-Wing configurations. The viscous-compressible Navire-Stokes equation and Spalart-Allmaras turbulence model of the commercial CFD code were adopted for this computation analysis. This investigation examined aerodynamic characteristics of three different types of leading edge sweepback angles: $30^{\circ}C,\;35^{\circ}C\;and\;40^{\circ}C$. The freestream Mach number was M=0.80 and the angle of attack ranged from ${\alpha}=0^{\circ}C\;to\;{\alpha}=20^{\circ}C$. The results show that the increases in sweepback angle of the Flying-Wing configuration creates more efficient aerodynamic performance.

• The KIPS Transactions:PartC
• /
• v.13C no.1 s.104
• /
• pp.121-128
• /
• 2006

In Mobile IPv6, a handover latency is an important issue. To reduce the handover latency, mipshop working group in IETF has studied the fast handover(FMIPv6) which creates and verifies a new care-of address(NCoA) in advance before a layer 2 handover resulting in reduced handover latency. Even in FMIPv6, the NCoA must be registered in a home agent(HA). This registration still creates a significant amount of delay. To reduce registration latency, we propose a tentative and early binding update(TEBU) scheme that the NCoA is registered in the HA in advance during the layer 2 handover based on FMIPv6. We use cost analysis for the performance evaluation. As a result, we found that the TEBU scheme guarantees lower handover latency than FMIPv6 as much as approximately 21%.

• The KIPS Transactions:PartC
• /
• v.10C no.6
• /
• pp.717-726
• /
• 2003

In this paper, we analyze the associated rule based deductive algorithm which creates the rules automatically for intrusion detection from the vast packet data. Based on the result, we also suggest the deductive algorithm which creates the rules of intrusion pattern fast in order to apply the intrusion detection systems. The deductive algorithm proposed is designed suitable to the concept of clustering which classifies and deletes the large data. This algorithm has direct relation with the method of pattern generation and analyzing module of the intrusion detection system. This can also extend the appication range and increase the detection speed of exiting intrusion detection system as the rule database is constructed for the pattern management of the intrusion detection system. The proposed pattern generation technique of the deductive algorithm is used to the algorithm is used to the algorithm which can be changed by the supporting rate of the data created from the intrusion detection system. Fanally, we analyze the possibility of the speed improvement of the rule generation with the algorithm simulation.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.237.2-237.2
• /
• 2016

A pure hafnium-carbide (HfC) coating layer was deposited onto carbon/carbon (C.C) composites using a vacuum plasma spray system. By adopting a SiC buffer layer, we successfully integrated C.C composites with a $100-{\mu}m-thick$ protective coating layer of HfC. Compared to the conventional chemical vapor deposition process, the HfC coating process by VPS showed increased growth rate, thickness, and hardness. The growth behavior and morphology of HfC coatings were investigated by FE-SEM, EDX, and XRD. From these results, it was shown that the addition of a SiC intermediate layer provided optimal surface conditions during the VPS procedure to enhance adhesion between C.C and HfC (without delamination). The thermal ablation test results shows that the HfC coating layer perfectly protected inner C.C layer from thermal ablation and oxidation. Consequently, we expect that this ultra-high temperature ceramic coating method, and the subsequent microstructure that it creates, can be widely applied to improve the thermal shock and oxidation resistance of materials under ultra-high temperature environments.

• Environmental Engineering Research
• /
• v.14 no.1
• /
• pp.48-52
• /
• 2009

Solubilization of sewage sludge creates favorable conditions for anaerobic microorganisms to produce biogas. In this paper, we quantify the effect of heating pretreatment on the degree of solubilization of sewage sludge. The pretreatment process was carried out using a lab-scale industrial microwave unit (2450 MHz frequency). Response surface analysis was applied to determine the combination of temperature-increase rate (ramp rate) (2.9 to 17.1 ${^{\circ}C}$/min) and terminal temperature (52 to 108${^{\circ}C}$). Both ramp rate and temperature significantly affected the solubilization degree of sludge. Within the design boundaries, the conditions predicted to maximize the solubilization degree of 15.8% were determined to be 2.9 ${^{\circ}C}$/min and 104${^{\circ}C}$.

• Journal of Korean Association for Spatial Structures
• /
• v.1 no.2 s.2
• /
• pp.59-66
• /
• 2001

This paper describes three modules for development of the Space Frame Integrated Design System(SFIDS). The Control Module is implemented to control the developed system. The Model Generation Module based on PATRAN user interface enables users to generate a complicated finite element model for space frame structures. The Optimum Design Module base on a branch of combinatorial optimization techniques which can realize the optimization of a structure having a large number of members designs optimum members of a space frame after evaluating analysis results. The Control Module and the Model Generation Module Is implemented by PATRAN Command Language(PCL) while C++ language is used in the Optimum Design Module. The core of the system is PATRAN database, in which the Model Generation Module creates information of a finite element model. Then, PATRAN creates Input files needed for the analysis program from the information of the finite element model in the database, and in turn, imports output results of analysis program to the database. Finally, the Optimum Design Module processes member grouping of a space frame based on the output results, and performs optimal member selection of a space frame. This process is repeated until the desired optimum structural members are obtained.