• 한국광학회지
• /
• 제15권3호
• /
• pp.263-267
• /
• 2004

Ti:sapphire 레이저로 펌핑하는 연속발진 Nd:YAG 레이저의 출력 특성과 Cr$^{4+}$:YAG 결정을 포화 흡수체로 이용하는 수동형 Q-switching된 Nd:YAG 레이저의 평균 출력, 펄스폭 및 반복률 등의 특성을 조사하였다. 그 결과 Nd:YAG 결정에 입사되는 Ti:sapphire 레이저의 펌핑 출력이 850 ㎽일 때, 연속 발진 Nd:YAG 레이저의 출력이 450 ㎽로 측정되어 출력 기울기 효율이 약 56%로 계산되었다. 또한, 초기 투과율이 90%인 Cr$^{4+}$:YAG 결정을 이용하여 수동형 Q-switching된 Nd:YAG 레이저 출력이 200㎽로 측정되었고, 이때의 펄스 반복률 및 펄스폭은 각각 23.8 KHz 및 17.0 ns로 측정되었다.되었다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.1898-1904
• /
• 2003

Laser heat treatment is an effective technique used to improve the tribological properties and also to increase the service life of automobile components such as camshafts, crankshatfs, lorry brake drums and gears. High power $CO_{2}$ lasers and Nd:YAG lasers are employed for localized hardening of materials and hence are of potential application in the automobile industries. The heat is conducted rapidly into the bulk of the specimen causing self-quenching to occur and the formation of matrensitic structure. In this investigation, the microstructrual features occurring in Nd:YAG laser hardening SM45C and $STD_{11}$ steel are discussed with the use of optical microscopic and scanning electron microscopic analysis. Moreover, This paper describes the optimisation of the processing parameters for maximum hardened depth of SM45C and $STD_{11}$ steel specimens of 10mm thickness by using CW Nd:YAG laser.

• 한국광학회지
• /
• 제9권3호
• /
• pp.175-180
• /
• 1998

고체 레이저매질로 가장 널리 쓰이는 Nd:YAG 단결정을 Czochralski 방법으로 육성하였다. 자체 제작한 Czochralski 결정 육성로 및 자동 결정 적경제어 장치를 써서 유효 직경 50mm, 길이 100mm의 Nd3+ 이온농도가 0.9at%이고 <111>방향의 단결정을 육성하였다. 단결정 육성시 융액의 수직방향에 대한 온도구배가 중용한 변수인 것이 확인되었으며, 결정 직경은 자동 제어가 가능하도록 컴퓨터 프로그램을 제작하였다. 육성된 단결정을 절단, 가공, 연마, 코팅 과정을 거쳐서 레이저 발진용 Nd:YAG막대를 제작하고 흡수 스펙트럼, 형과 스펙트럼 분석을 통하여 정확한 Nd:YAG의 레이저 발진특성을 확인하였다. 자체 가공된 레이저 막대로부터 발진된 CW 레이저의 최대 출력은 70W이었고, 발진문턱값과 효율은 각각 1.3kW, 1.64%이었다.

• 한국레이저가공학회:학술대회논문집
• /
• 한국레이저가공학회 2000년도 춘계학술발표대회 논문개요집
• /
• pp.55-60
• /
• 2000

Laser welding is an important technology in the assembly of automotive. In this paper, Nd:YAG laser welding of applications for auto body assembly will be introduced. This paper will describe characteristics of the CW Nd:YAG laser lap-joint welding, and laser welding of specific configurations for a Zinc-coated steel. Experimental results indicated that the weld quality of auto body assembly using the CW Nd:YAG laser welding technology.

• 한국기계가공학회지
• /
• 제5권1호
• /
• pp.51-58
• /
• 2006

The objective of this research work is to investigate into heat transfer characteristics of the laser cutting of CSP 1N sheet using high power CW Nd:YAG laser. In order to investigate the heat transfer characteristics, three dimensional quasi stationary and steady-state heat transfer analysis has been carried out. The laser heat source is assumed as a volumetric heat source with a gaussian heat distribution in a plane. Through the comparison of the results of analyses with those of experiments, the proper finite element model has been obtained. In addition, characteristics of the three-dimensional heat transfer and temperature distribution have been estimated by the finite element model. Finally, the minimum temperature at the center for cutting of the material has been estimated.

• 한국정밀공학회지
• /
• 제24권5호
• /
• pp.35-43
• /
• 2007

Laser welding of metals has been widely used to improve a wear resistance and a corrosion resistance of the industrial parts. The objective of this research works is to investigate the influence of the process parameters, such as the welding for metals with CW Nd:YAG lasers. The bead-on-plate welding tests are carried out for several combinations of the experimental conditions. In order to quantitatively examine the characteristics of the butt welding, the welding quality of the cut section, stain-stress behavior and the hardness of the welded part are investigated. From the results of the investigation, it has been shown that the optimal welding condition without defects in the vicinity of the welded area and with a good welding quality is 1325W of the laser power, and 1.4m/min of laser welding speed.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.910-915
• /
• 2004

The objective of this study is to investigate the influence of process parameters, such as power of laser, travel speed of laser and material thickness, on the practical cutting region and the kerfwidth for the case of cutting of CSP 1N sheet using high power Nd:YAG laser with continuous wave(CW). In order to find the practical cutting region and the relationship between process parameters on the kerfwidth, several laser cutting experiments are carried out. The effective heat input is introduced to consider the influence of power and travel speed of laser on the kerfwidth together. From the results of experiments, the allowable cutting region and the relationship between the effective heat input and kerfwidth for the case of cutting of CSP 1N sheet using high power CW Nd:YAG laser have been obtained to improve the dimensional accuracy of the cut area.

• 한국정밀공학회지
• /
• 제22권7호
• /
• pp.19-26
• /
• 2005

The objective of this study is to investigate the influence of process parameters, such as power of laser, cutting speed of laser and material thickness, on the practical cutting region and the kerfwidth fer the case of cutting of CSP IN sheet using high power Nd:YAC laser in continuous wave(CW) mode. In order to obtain the practical cutting region and the relationship between process parameters on the kerfwidth, several laser cutting experiments are carried out. The effective heat input is introduced to consider the influence of power and cutting speed of laser on the kerfwidth together. From the results of experiments, the allowable cutting region and the relationship between the effective heat input and kerfwidth fur the case of cutting of CSP 1N sheet using high power CW Nd:YAG laser have been obtained to improve the dimensionalaccuracyofthecutarea.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2000년도 특별강연 및 추계학술발표대회 개요집
• /
• pp.271-273
• /
• 2000

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 추계학술대회 논문집
• /
• pp.93-94
• /
• 2006