• Journal of IKEEE
• /
• v.23 no.2
• /
• pp.571-579
• /
• 2019

Visible light communication (VLC) performs illumination and communication simultaneously, thus it is important to prevent the flicker due to the optical power variation during data transmission and at the same time to have dimming control capability. In this paper, we used Manchester code for flicker-prevention and dimming control. In the transmitter, the duty factor of the Manchester code was used for controlling the LED illumination. In the receiver, the edge-spike signals of an RC-high pass filter were used for recovering the Manchester code while preventing the adjacent noise light. In experiments, the LED light was kept flicker-free and the average optical power was controlled in the range of 8~68 % of the continuous wave (CW) LED light by changing the duty factor of the Manchester code.

• Proceedings of the KIPE Conference
• /
• 2015.11a
• /
• pp.105-106
• /
• 2015

본 논문은 고정형 안테나를 이용한 원격 추적시스템에 필터구성과 모터제어기술을 적용하여 기존 원격 추적시스템에 비해 정확한 위치 추적율을 갖는 시스템 신뢰성을 확보에 목적을 갖는다. 세부적으로 정확한 위치 추적율로 인해 기존 사람에 의한 위치 추적에서 무인 원격 추적시스템을 구성하여 연구자가 연구하고자 하는 대상의 위치 추적이 가능하다. 수신기에서 발송되는 CW변조방식의 송신데이터를 양자화한 후 절대값을 취해 최대전계강도를 검출한다. 이 과정에서 발생되는 노이즈 제거를 위한 필터 구성과 필터를 통과한 신호의 최대 전계강도 추적을 위한 모터 제어기술 방식을 제안한다. 따라서 본 논문에서 제안된 신호를 수신하기 위한 ABS회로 및 필터기술을 통한 내역은 PISM을 이용한 시뮬레이션과 실제 환경조건을 갖는 실험을 통해 제안된 알고리즘의 타당성과 우수성을 검증하였다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.10
• /
• pp.1011-1016
• /
• 2003

In this paper, we investigate the relationship between the intermodulation signal of 2-tone and CDMA spurious emission of HPA. And confirm that the fifth IMD signal of HPA has more important effect upon CDMA ACPR characteristics than the third IMD signal. We present the method for the power amplifier to satisfy the 2-tone and CDMA specification simultaneously, and that is to use the predistorter for improving the third IMD signal of 2-tone for the power amplifier which is tuned to satisfy the CDMA specification and not to satisfy the 2-tone specification. The result by using the method which is presented from this paper shows that the ACPR is improved about 2 dB for CDMA 1FA(frequency allocation) signal and the third IMD signal is improved about 20 dB for CW 2-tone signals and we confirmed the specification is satisfied simultaneously.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.12 s.103
• /
• pp.1239-1245
• /
• 2005

In this paper, a new predistortion linearizer using second harmonic components feedforwarding is proposed. The harmonic generator of the proposed predistorter that consists of a small signal amplifier extracts second harmonic signals. A vector modulator that modulate fundamental signal with second harmonic signals, generates the inverse third order intermodulation distortion signals and controls amplitude/phase of them with modulation factors. As a result, this linearizer is suppressed IMD3 signals of power amplifier effectively. The test results show that the third order IMD of power amplifier is suppressed more than 20 dB for CW two-tone signals. Also, it's improved the adjacent channel power ratio(ACPR) more than 5 dB for CDMA(IS-95) 4FA signals.

• Journal of Advanced Navigation Technology
• /
• v.10 no.1
• /
• pp.41-47
• /
• 2006

In this paper, a predistortion linearizer using the in-phase modulator is proposed. The harmonic generator of the proposed predistorter extracts a second harmonic signals. These signals are divided in-phase and quadrature-phase signals, and then amplifying each signals using variable gain amplifier. An in-phase modulator, modulate fundamental signal with second harmonic signals, generates the predistortion intermodulation distortion (IM) signals and controls amplitude and phase of them with modulation factors. As a result, this predistorter is suppressed intermodulation distortion signals of power amplifier effectively. The proposed linearizer has been implemented to operate in Cellular-band. The test results show that the third order IM is cancelled more than 20dB in case of CW 2-tone signals with ${\Delta}f$=1MHz. Also, it's improved the adjacent channel power ratio (ACPR) more than 7dB for IS-95 CDMA 1FA signals.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.39 no.9
• /
• pp.28-34
• /
• 2002

In this paper, a new type predistorter using a low frequency intermodulation signals terms of harmonic generator is proposed. A vector modulator, in which fundamental signal is modulated with low frequency intermodulation signals derived from harmonic generator, generates predistorted third and fifth IM components. Using predistorted signals, intermodulation distortion signals of power amplifier suppressed. The suggested predistorter has been manufactured to operate in Korean PCS base-station transmitting band (1840~1870MHz). The test results show that the third IMD signal level is reduced more than 20dB and the fifth IMD signal is reduced about 10dB for CW two-tone signals. The predistorter improves the Adjacent Channel Power Ratio (ACPR) more than 10dB for CDMA (IS-95) signals.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.2
• /
• pp.208-217
• /
• 2010

This paper presents a novel 10 GHz bio-radar system based on a frequency multiplier and phase-locked loop(PLL) for non-contact measurement of heartbeat and respiration rates. In this paper, a 2.5 GHz voltage controlled oscillator (VCO) with PLL is employed to as a frequency synthesizer, and 10 GHz continuous wave(CW) signal is generated by using frequency multiplier from 2.5 GHz signal. This paper also presents the noise characteristic of the proposed system. As a result, a better performance and economical frequency synthesizer can be achieved with the proposed bio-radar system. The experimental results shows excellent bio-signal measurement up to 100 cm without any additional digital signal processing(DSP), and the proposed system is validated.

• Korean Journal of Optics and Photonics
• /
• v.11 no.1
• /
• pp.37-42
• /
• 2000

We have numerically solved rate-equations of semiconductor optical amplifier (SOA) to understand the characteristics of SOA. The rate-equations we have used can describe injection carrier density, amplified spontaneous emission and signal photon density in spatial and time domain by dividing the cavity into multi-section. We have investigated injection carrier density, amplified spontaneous emission and signal photon density as a function of position and time in the case of single channel input in the form of square pulse. Also we have analyzed the non-linear phenomena of SOA in the case of injecting multi-channel wavelengths as in WDM. Intermodulation distortion (IMD) caused by beat among channels has significant effects on the signal distortion as the channel spacing becomes narrower, and channel crosstalk becomes larger as the power of signals increases. In the case of the injection of another CW laser whose wavelength is far enough from the signal wavelengths, the crosstalk and the output signal distortion can be significantly reduced. duced.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.12 no.6
• /
• pp.1-4
• /
• 1975

This paper dells with the impedance variations of the IMPATT diode depending upon the small a.c. coomponent superimposed on the d.c. bias. The frequency deviation of the modulated wave is measured using a carrier null method on microwave spectrum analyser. Frequency modulation is achieved by the weack a.c. signal superimposed on the d.c. bias. The bandwidth rapidly increase with increasing modulation signal magnitude for constant modulation frquency and slightly decrease with decreasing modulation frequency for constant modulation signal magnitude.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.13 no.4
• /
• pp.285-301
• /
• 1988

The symbol error rate equations of multi-level quadrature PRS(QPRS) system have been derived in the individual and composite environment of Gaussian/impulsive noise, cochannel CW interference, carrier offset, phase jitter and fading. And using the derived error rate equations, the probability of error has been evaluated and shown in graphs as functions of carrier to noise power ratio, carrier to interference power ratio, phase error, impulsive index, the ration of Gaussian noise to impulsive noise power component, signal to noise power ration in phase locked loop(PLL), and fading figures. The rseults show that the error rate performances are generally more more degraded by impulsive noise than by Gaussian noise. But on the contrary the erors occurred more frequently by Gaussian noise than impulsive noise in a fading environment.