• Membrane and Water Treatment
• /
• v.11 no.2
• /
• pp.151-158
• /
• 2020

ACF preparation from different materials has been attached with great attention during these years. This study was conducted to prepare activated carbon fiber (ACF) from luffa through the processes i.e pre-treatment, pre-oxidation and carbonization activation. Besides, this study also characterizes the ACF and its effect, i.e effect of pre-oxidation time and temperature also activation time and temperature on the compressive strength of ACF were investigated. The results from SEM, BET, FTIR and XRD show that the ACF is very efficient. The products under the optimum conditions had a specific surface area of 478.441 m2 /g with an average pore diameter of 3.783nm, and a pore volume of 0.193 cm3 /g. The surface of the luffa fiber is degummed and exposed, which is beneficial to the subsequent process and the increase of product properties. The compressive strength of HP-ACF was prepared under the optimum conditions, which can reach 0.2461 MPa. ACF is rich in micro-pores and has a good application prospect in the field of environmental protection.

• Membrane and Water Treatment
• /
• v.11 no.2
• /
• pp.87-95
• /
• 2020

The worldwide shortage of water resources is a major environmental issue. Using pure water for drinking and domestic purposes is a bigger issue than other environmental issues. Industrialization and Urbanization have even polluted rainwater. In China, when it rains, rainwater is stored on the roof or other sources of storage for daily use resulting in pollution. Several studies have been conducted to treat rainwater. The objective of this study is to evaluate the efficiency of constructed wetlands by using ACF as a medium. So, this study aims to treat rainwater in Wuhan city through a Composite Vertical Flow Constructed Wetlands. First, rainwater was stored in the tank while it flows out of the roof, further it is processed in constructed wetlands. The constructed wetlands is consisted with plants Calamus and Chives, adding ACF (prepared from luffa) has achieved great results in this study. Results show that the pollutants have been removed to a considerable level, there were significant differences in removal rates under different HRT at 6h, 9h and 12h respectively. Therefore, Composite Vertical Flow Constructed Wetlands is recommended for total nitrogen and Ammonia nitrogen and total phosphorus.

• Membrane and Water Treatment
• /
• v.11 no.4
• /
• pp.313-321
• /
• 2020

ACF preparation from different materials and its application in constructed wetlands for wastewater treatment has been focused in environmental field. Different materials have been used to prepare ACF around the world. This study aims to prepare, characterize and use of ACF from loofah for removal of Tetracycline from water through composite vertical flow constructed wetlands. ACF was prepared and it was tested for characterization, later it was used for removal of Tetracycline from water through composite vertical flow constructed wetlands. In composite vertical flow constructed wetlands, three HRTs were set according to the experiment, 1D, 2D, and 3D is individually. Samples were transported immediately from collection point to laboratory for analyzing. Samples were measured for Tetracycline (TC), Total Phosphorus (TP), and Total nitrogen and COD. Tetracycline absorbance with respective 356nm was obtained good and HRT is important factor. Results show that composite vertical flow constructed wetlands with ACF from luffa is best option and it is recommended to study further deep analysis.