• Journal of Plant Biotechnology
• /
• v.39 no.1
• /
• pp.69-74
• /
• 2012

Using calli of $Muscari$ $armeniacum$ cv. 'Early Giant' that is monocotyledonous ornamental bulb crop with increasing demand in Korea, we carried out current studies to establish an in vitro multiple propagation protocol via somatic embryogenesis. We found that soft pale yellow green calli were induced from leaf explants cultured on all media containing 0.1~3.0 $mg{\cdot}L^{-1}$ auxins such as 1-naphthalene acetic acid (NAA) and 2,4-dichlorophenoxyacetic acid (2,4-D). However, induced calli showed vigorous growth only when they further transferred on same media containing 2,4-D, 4-amino-3,5,6-tri-chloropicolinic acid (picloram), or 3,6-dichloro-o-anisic acid (dicamba). Although frequency of somatic embryo induction depended on callus source and PGR composition in somatic embryo induction media, somatic embryogenesis was initiated on surface of proliferated calli after transferring on media with no PGR or 0.01 $mg{\cdot}L^{-1}$ NAA co-supplemented with various cytokinins such as $N^6$-benzylaminopurine (BAP). Highest number of embryo at 9.3 per callus clump was obtained when calli which were grown under 0.1 $mg{\cdot}L^{-1}$ picloram supplementation were sub-cultured on medium with 0.01 $mg{\cdot}L^{-1}$ NAA and 0.5 $mg{\cdot}L^{-1}$ BAP. In addition, morphological characteristics of somatic embryo were categorized into following nine phases: globular, biased heart, biased torpedo, early cotyledonary, middle cotyledonary, late cotyledonary, early sprouting, middle sprouting, and late sprouting embryos.

• Korean Journal of Weed Science
• /
• v.8 no.2
• /
• pp.187-198
• /
• 1988

The second leaves from 30 days old seedlings of two rice cultivars which were selected as tolerant (cv. Chokoto) and susceptible (cv. Weld pally) cultivar were soaked in the concentration of $10^{-6}$, $10^{-5}$, $10^{-4}$ and $10^{-3}M$ of oxyfluorfen for 10, 15 and 22hrs and anatomical characteristics were abserved. Dipping to the solutions were carried out either directly to the attached leaves or to the seperated leaves. Development of any symptoms in epidermis, bundle sheath, mesophyll cells and bulliform cells were microscopically inspected. Both cultivars showed reductionin leaf thickness, but the susceptible ones was more sensitive than the tolerant. The degradation and disappearance of epidermal cell layer, breakage of bundle sheath cells, shrinkage of mesophyll cells and disappearance of bulliform cells were general response as affected by oxyfluorfen treatment. The susceptible cultivars showed such responses at the concentration of $10^{-5}M$ for 10 hrs while tolerant ones $10^{-3}M$, for 10 hrs. Those treatments were more effective in seperated leaves than in attached ones. The epicuticular wax layer of leaves treated as above for 20 hrs was inspected by SEM. Weld pally, the susceptible cultivar (Weld pally) showed rapid cleavage of wax layer under $10^{-5}M$ concentration while the tolerant (Chokoto) showed only minor damage on wax layer at the concentration of $10^{-3}M$.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.27 no.4
• /
• pp.287-296
• /
• 2007

The experimental work was conducted to determine the growth characteristics and yield of whole crop rice (cv. Suwon 468 and cv. Chuchungbeo) and soil properties using various type of livestock manure application on rice paddy land for 3 years ($2003{\sim}3005$). Compared Suwon 468 and Chuchungbeo, Suwon 468 has longer plant height and more DM yield than that of Chuchungbeo. Among livestock manure type, plant height was longer in order of liquid swine manure (LSM) > composted swine manure (CSM) > chemical fertilizer (CF) > composted cattle manure (CCM). Number of branch on Chuchungbeo had more than that of Suwon 468. Among livestock manure type, number of branch had more in order of LSM > CSM > CF > CCM. DM yield of whole crop rice (WCR) was affected by various types of livestock manure application and increased in order CSM > CCM = LSM. DM yield on the effects of application level of LSM was highest in LSM 75% + CF 25%. Plant diseases such as rice blast, damage by insect, smut, sheath blight occurred in LSM and CSM and there was not significantly different among application level of LSM. The nitrogen content of WCR by CSM was the highest of all treatments and the ripened ratio by CSM was in contrary order. Moreover the feed value of WCR was not significantly different among treatments. Soil pH, organic matter and total nitrogen was not different by LSM application whereas phosphorus content increased by LSM application. Cu and Zn content increased by LSM and CSM application and were not different by CCM as compared to control plots.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.40 no.1
• /
• pp.57-65
• /
• 2020

This study was conducted to investigate the effect of sowing and harvesting dates on agronomic characteristics and feed values of rye and triticale at Sanchoeng, South Korea. The experimental design consisted of the different sowing and harvesting dates as follows; rye (Secale cereale L., cv. Gogu) of sowing (October 15, 25, and November 5) in 2015 and harvesting (April 20, May 1 and May 11) in 2016, and triticale (X Triticosecale, cv. Joseong) of sowing (October 15, 25, and November 5) in 2015 and harvesting (May 18, 28, and June 7) in 2016. In rye, fresh and dry matter (DM) yields increased (p<0.05) with the delayed-harvesting date. Crude protein (CP) content and relative feed value (RFV) decreased (p<0.05) with the delayed-harvesting date, but neutral detergent fiber (NDF) content increased (p<0.05). In triticale, fresh and dry matter (DM) yields increased (p<0.05) with the delayed-harvesting date. The CP content decreased (p<0.05) with the delayed-harvesting date, but NDF content and RFV increased (p<0.05). This study concluded that rye sown in the middle of October then harvested in early May, and the triticale sown at the end of October then harvested at the end May are recommended to increase dry matter yield and feed value.

• Food Science and Preservation
• /
• v.22 no.3
• /
• pp.443-451
• /
• 2015

This study was carried out to investigate the quality characteristics and identification of acetic acid bacteria for black waxy rice vinegar. Eight (8) strains of acetic acid bacteria were isolated for the production of acetic acid and their acidities were then compared with commercial acetic acid bacteria. Among them, F1, H4, and two types of commercial bacteria (four best strains by vinegar zymogen) were selected. After analyzing the 16S rRNA sequence, both F1 and H4 strains were identified as acetobacter genus. Therefore, the F-1 and H-4 strains were named as Acetobacter sp. F-1 and Acetobacter sp. H-4, respectively. Acidity of black waxy rice vinegar during fermentation was steadily increased up to 16 days and the acidity was then constant. Total acidity content was higher when used FV-1 strain. In the results of Hunter's color value of black waxy vinegar, L value was at 75.01 to 80.11, while (+a) value was at 3.34 to 3.92, and (+b) value was at 12.84 to 18.09. The major organic acid of the black waxy vinegar was acetic acid. The total organic acid content was high when used H-4, F-1, C-2 and C-1 strains. The total free amino acid content of the black waxy vinegar by strain was the highest (351.43 mg%) of F-1 vinegar strain, and the lowest (247.74 mg%) of C-2 vinegar strain. A sensory evaluation of black waxy vinegar indicated that F-1 vinegar strain was better than the other samples in aspect of flavor, color, and overall preference.

• KSBB Journal
• /
• v.25 no.6
• /
• pp.572-576
• /
• 2010

Biological products, such as live varicella vaccine, are composed of biological substances derived from biological organisms. It is very difficult to identify these biologics' characteristics by analysis of simple physical and chemical methods alone. So the reference material is essential in order to evaluate the quality of bilogics. The 1'st national standard for varicella live vaccine was manufactured, established in 2002 and 2003, and have been used for the manufacturer's quality control and national lot release since then. As the lack of its availability and the decrease of its stability, this study was initiated by National Institute of Food and Drug Safety Evaluation (NiFDS) in 2008 to manufacture and establish the 2nd national standard for varicella live vaccine. The candidate material was manufactured from one of domestic manufacterers and the joint research of the NiFDS and manufacturers of varicella live vaccine was conducted to estimate of the reliable virus content. In the collaborative study, 3 laboratories including NiFDS performed the virus content test more than 7 times and all assay results were statistically analyzed. The mean coefficient of variation (CV) was 1.24%, and the geometric mean titre (GMT) variation range of each laboratory was low. On the basis of the results of this study, the candidate material of 2nd national standard for varicella live vaccine was assigned a potency of 4.26 log10 pfu/0.5 mL, when reconstituted in 0.7 mL.

• Applied Chemistry for Engineering
• /
• v.25 no.1
• /
• pp.78-83
• /
• 2014

In this research, we evaluated the performance and characteristics of carbon supported PtM (M = Ni and Y) alloy catalysts (PtM/Cs) synthesized by a modified polyol method. With the PtM/Cs employed as a catalyst for the oxygen reduction reaction (ORR) of cathodes in proton exchange membrane fuel cells (PEMFCs), their catalytic and ORR activities and electrical performance were investigated and compared with those of commercial Pt/C. Their particle sizes, particle distributions and electrochemically active surface areas (EAS) were measured by TEM and cyclic voltammetry (CV), while their ORR activity and electrical performance were explored using linear sweeping voltammetries with rotating disk electrodes and rotating ring-disk electrodes as well as PEMFC single cell tests. TEM and CV measurements show that PtM/Cs have the compatible particle size and EAS with Pt/C. When it comes to ORR activity, PtM/C showed the equivalent or better half-wave potential, kinetic current density, transferred electron number per oxygen molecule and $H_2O_2$ production(%) to or than commerical Pt/C. Based on results gained by the three electrode tests, when the PEMFC single cell tests were carried out, the current density measured at 0.6 V and maximum power density of PEMFC single cell adopting PtM/C catalysts were better than those adopting Pt/C catalyst. It is therefore concluded that PtM/C catalysts synthesized by modified polyol can result in the equivalent or better ORR catalytic capability and PEMFC performance to or than commercial Pt/C catalyst.

• Korean Journal of Soil Science and Fertilizer
• /
• v.22 no.4
• /
• pp.257-264
• /
• 1989

In order to study spatial variability of soil chemical properties across the land-partitioned boundary on Hwadong silt clay loam soil (Fine clayey, mixed, mesic family of Aquic Hapludalfs) in the experimental fie ld of the wheat and Barley Research Institute in Suwon, all measured data were analyzed by means of kriging, fractile diagram, smooth frequency distribution, and autocorrelation. Sampling for soil chemical property analysis was made at 225 intersections of 15x 15 grid with 10m interval from three soil depths (0-10cm, 25-35cm, 50-60cm) in the seven patitioned fields. 1. The coefficient of variance (CV) of various chemical properties varied from 5.4 to 72.7%. Soil pH was classified into the low variation group with CV smaller than 10%, while the other chemical properties belonged to the medium variation group with C.V. between 10 and 100% 2. The approximate number of soil samples for the determination of various chemical properties with error smaller than 10% were two for pH, ten for CEC, 15 for exchangeable Ca, 32 for total nitrogen content, 39 for exchangeable Mg, 40 for exchangeable K, 61 for exchangeable Na, 82 for organic matter content, 212 for available phosphate,. 3. Smooth frequency distribution and fractile diagram showed that available phosphate was in log-normal distribution while others were in normal distribution. 4. Serial correlation analysis revaled that the soil chemical properties had spatial dependence between two nearest neighbouring grid points. Autocorrelation analysis of chemcial properties measured between the serial grid points in the direction of south to north following land-partitioned boundary showed that the zone of influence showing stationarity ranged from 20 to 50m. In the direction of east to west accross land-partitioned boundary, the autocorrelogram of many chemical properies showed peaks with the periodic interval of 30m, which were similar to the partitioned land width. This reveals that the land-partitioned boundary causes soil variability.

• Journal of Bio-Environment Control
• /
• v.28 no.2
• /
• pp.95-103
• /
• 2019

Temperature and relative humidity are important factors in crop cultivation and should be properly controlled for improving crop yield and quality. In order to control the environment accurately, we need to predict how the environment will change in the future. The objective of this study was to predict air temperature and relative humidity at a future time by using a multilayer perceptron (MLP). The data required to train MLP was collected every 10 min from Oct. 1, 2016 to Feb. 28, 2018 in an eight-span greenhouse ($1,032m^2$) cultivating mango (Mangifera indica cv. Irwin). The inputs for the MLP were greenhouse inside and outside environment data, and set-up and operating values of environment control devices. By using these data, the MLP was trained to predict the air temperature and relative humidity at a future time of 10 to 120 min. Considering typical four seasons in Korea, three-day data of the each season were compared as test data. The MLP was optimized with four hidden layers and 128 nodes for air temperature ($R^2=0.988$) and with four hidden layers and 64 nodes for relative humidity ($R^2=0.990$). Due to the characteristics of MLP, the accuracy decreased as the prediction time became longer. However, air temperature and relative humidity were properly predicted regardless of the environmental changes varied from season to season. For specific data such as spray irrigation, however, the numbers of trained data were too small, resulting in poor predictive accuracy. In this study, air temperature and relative humidity were appropriately predicted through optimization of MLP, but were limited to the experimental greenhouse. Therefore, it is necessary to collect more data from greenhouses at various places and modify the structure of neural network for generalization.

• Korean Journal of Remote Sensing
• /
• v.39 no.5_3
• /
• pp.933-948
• /
• 2023

Atmospheric aerosols not only have adverse effects on human health but also exert direct and indirect impacts on the climate system. Consequently, it is imperative to comprehend the characteristics and spatiotemporal distribution of aerosols. Numerous research endeavors have been undertaken to monitor aerosols, predominantly through the retrieval of aerosol optical depth (AOD) via satellite-based observations. Nonetheless, this approach primarily relies on a look-up table-based inversion algorithm, characterized by computationally intensive operations and associated uncertainties. In this study, a novel high-resolution AOD direct retrieval algorithm, leveraging machine learning, was developed using top-of-atmosphere reflectance data derived from the Geostationary Ocean Color Imager-II (GOCI-II), in conjunction with their differences from the past 30-day minimum reflectance, and meteorological variables from numerical models. The Light Gradient Boosting Machine (LGBM) technique was harnessed, and the resultant estimates underwent rigorous validation encompassing random, temporal, and spatial N-fold cross-validation (CV) using ground-based observation data from Aerosol Robotic Network (AERONET) AOD. The three CV results consistently demonstrated robust performance, yielding R²=0.70-0.80, RMSE=0.08-0.09, and within the expected error (EE) of 75.2-85.1%. The Shapley Additive exPlanations(SHAP) analysis confirmed the substantial influence of reflectance-related variables on AOD estimation. A comprehensive examination of the spatiotemporal distribution of AOD in Seoul and Ulsan revealed that the developed LGBM model yielded results that are in close concordance with AERONET AOD over time, thereby confirming its suitability for AOD retrieval at high spatiotemporal resolution (i.e., hourly, 250 m). Furthermore, upon comparing data coverage, it was ascertained that the LGBM model enhanced data retrieval frequency by approximately 8.8% in comparison to the GOCI-II L2 AOD products, ameliorating issues associated with excessive masking over very illuminated surfaces that are often encountered in physics-based AOD retrieval processes.