• Journal of The Korean Society of Grassland and Forage Science
• /
• v.16 no.1
• /
• pp.81-86
• /
• 1996

Silage wm(cv, Gwanganok) was cultivated during 1991-1994 on paddy land as a rotational cropping system of rice, to evaluate the effect of cattle manure application on the soil characteristics, yield performance and quality of com plant. The treatments used in this study were non-fertilizer, NPK standard in chemical fertilizer(N:$P_2O_5$ : $K_2O$= 200 : 150 : 150 kg/ha), cattle manure 20.40, 60 and 80 ton/ha Application of cattle manure improved soil pH, organic matter, available phosphate and exchangeable cations in the soils. During the experiment, soil pH was improved from 4.7 in the chemical fertilizer application(control) to 5.4-5.6 in the application of cattle manure, and available $P_2O_5$ wntent was increased from 72.2 ppm(contro1) to 340.2 ppm(cattle manure 80 ton/ha). Application of cattle manure increased plant growth, plant height and stalk diameter, and silage yields. Dry matter yields were produced 15.88 ton(chemical fertilizer), 20.11 ton(cattle manure 40 ton) and 21.22 ton/ha(cattle manure 80 ton/ha). However, no signicant yield differences were observed between cattle manure 40, 60 and 80 tonlha Productions of total digestible nutrients(TDN) and net energy for lactation(NEL) were also increased under cattle manure application. From the abobe results, the proper application amount of cattle manure was 40 tonha in this experiment.

• Journal of the Korean Applied Science and Technology
• /
• v.17 no.1
• /
• pp.63-66
• /
• 2000

Organic Electroluminescent devices(OELD) consisted of multilayer structures have been studied for the application the application to flat-panel display. Metal-chelate complexes, zinc bis(2-(2-hydroxyphenyl)benzoxazolate) ($Zn(BOX)_{2}$) and zinc bis(2-(2-hydroxyphenyl)benzothiazolate) ($Zn(BOX)_{2}$), have been intensively investigated as an white-light emitting layer and recognized to have good electroluminescent(EL) properties. In this study, ($Zn(BOX)_{2}$) and ($Zn(BTZ)_{2}$) were synthesized and characterized by FT-IR, $^{1}H-NMR$, UV-VIS and PL. Their EL properties were also studied and their ionization potential(IP) and electron affinity(EA) were also measured by cyclic voltammetry(CV).

• International journal of advanced smart convergence
• /
• v.9 no.3
• /
• pp.246-252
• /
• 2020

Facial recognition is a biometric technology that is used in various fields such as user authentication and identification of human characteristics. Face recognition applications are practically used in various fields, but very few applications have been developed to improve the factory work environment. We implemented applications that uses face recognition to identify a specific employee in a factory .work environment and provide customized information for each employee. Factory workers need documents describing the work in order to do their assigned work. Factory managers can use our application to register documents needed for each worker, and workers can view the documents assigned to them. Each worker is identified using face recognition, and by tracking the worker's face during work, it is possible to know that the worker is in the workplace. In addition, as a mobile app for workers is provided, workers can view the contents using a tablet, and we have defined a simple communication protocol to exchange information between our applications. We demonstrated the applications in a factory work environment and found several improvements were required for practical use. We expect these results can be used to improve factory work environments.

• Journal of Environmental Science International
• /
• v.22 no.9
• /
• pp.1161-1170
• /
• 2013

The efficiency of coal-based activated carbon in removing methylene blue (MB) and phenol from aqueous solution was investigated in batch experiments. The batch adsorption kinetics were described by applying pseudo-first-order, pseudo-second-order, and first order reversible reaction. The results showed that the adsorption of MB and phenol occurs complexed process including external mass transfer and intraparticle diffusion. The maximum adsorption capacity obtained from Langmuir isotherm was 461.0 mg/g for MB and 194.6 mg/g for phenol, respectively. The values of activation parameters such as free energy (${\Delta}G^0$), enthalpy (${\Delta}H^0$), and entropy (${\Delta}S^0$) were also determined as -19.0~-14.9 kJ/mol, 25.4 kJ/mol, and 135.2 J/mol K for MB and 51.8~54.1 kJ/mol, -29.0 kJ/mol, and -76.4 kJ/mol K for phenol, respectively. The MB adsorption was found to be endothermic and spontaneous process. However, the CV adsorption was found to be exothermic and non-spontaneous process.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07b
• /
• pp.1220-1223
• /
• 2003

A new type electric double layer capacitor (EDLC) was constructed by using carbon nanofibers (CNFs) and DAAQ(1,5-diaminoanthraquinone) electrode. Carbonaceous materials are found in variety forms such as graphite, diamond, carbon fibers etc. While all the carbon nanofibers include impurities such as amorphous carbon, nanoparticles, catalytic metals and incompletely grown carbons. We have eliminated of Ni particles and some carbonaceous particles in nitric acid. Nitric acid treated CNFs could be covered with very thin DAAQ oligomer from the results of CV and TG analyses and SEM images. A crystalline supramolecular oligomer of 1,5-diaminoanthraquinone(DAAQ) was successfully prepared as a thin film by electrochemical oxidation from an acidic non-aqueous medium. DAAQ oligomer film exhibited a specific capacity as 45-50 Ah/kg in 4M $H_2SO_4$. Its electrochemical characteristics were investigated by cyclic voltammetry. And compared with different electrolyte of aqueous type. During ultrasonic irradiation CNFs was to disperse in 0.1M $H_2SO_4$. As a result, CNFs coated by DAAQ composite electrode showed relatively good electrochemical behaviors.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.129-129
• /
• 2010

The conjugated oligomers with rigid and fused-ring structures are of interest for the solution-processable organic thin film transistors (OTFTs) due to their well defined structure and high purity. In this study, alkyl substituted benzothiophene based oligomers were synthesized by a novel route, the key point of which is the acid-induced intermolecular cyclization reaction of aromatic methyl sulfoxides, and were confirmed by $^1H$-NMR and FT-IR studies. The obtained oligomers showed the good solubility in common organic solvents such as hexane, chloroform, and dimethylchloride at room-temperature, which is due to the introduced alkyl chain. The physical and optical properties of the oligomers were studied using differential scanning scalorimetry (DSC), cyclic-voltammetry (CV), UV-visible and PL spectra studies. Solution processed OTFT device based on synthesized oligomers show a high hole mobility of up to $0.01\;cm^2V^{-1}s^{-1}$, $I_{on}/I_{off}$ of $10^5$ and threshold voltage of -14V.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.85-85
• /
• 2010

In this paper, each specimen blended at weight proportions of 80% HDPE to 20% EVA, 70% HDPE to 30% EVA, 60% HDPE to 40% EVA, and 50% HDPE to 50% EVA was manufactued respectively. FE-SEM, DSC and XRD analysis were carried out as the means of structural and chemical analysis. From the results of DSC and XRD analysis, the lower contents in blended specimens were, the higher melting temperature and crystallinity of main crystal were. It seems that the phenomena was attributes to themoplastic interpenetrating network effect(TPIPN) in which EVA having low melting point penetrated into HDPE. Also, from the decreasing tendeancy of melting point as a function of blend ration, it was confirmd that above resins have compatibility. The thermal and mechanical performance of proposed insulator were compared with conventional XLPE, main insulating material of CV cable. Also, validity was proved by superior and inferior factor respectively.

• The Plant Pathology Journal
• /
• v.15 no.6
• /
• pp.345-347
• /
• 1999

A scab disease on eggplant (Solanum melongena L. cv. Chukyang) in plastic film houses around Kimhae area in Korea during the winter season of 0998-1999. The disease started on leaves with small dark brown spots which were gradually expanded to 1 to 3 mm diameter lesions. Later, the central parts of the lesions became collapsed and detached to make holes. Dark brown mold was grown out of the lesions on the lower side of leaf. Numerous conidia were produced on the lower side of leaf. Numerous conidia were produced on the diseased leaves and appeared to be readily dispersed in the air. A fungus was isolated from the diseased leaves, and tested for Koch's postulates to prove the causal agent of the desease. The isolated fungus grew on potato dextrose agar, forming greenish black to pale brown colonies. Conidia were ellipsoidal, fusiform or subspherical, mostly one-celled but occasionally septated, and formed in long branched chains on the erected conidiophores which were pale olevaceous brown and variable in length between 12.4 and $393.4\mu\textrm{g}$. The fungus was identified as Cladosporium cucumerinum Ellis Arthur based on the above morphological characteristics examined. The optimum temperature for mycelial growth and conidial formation was about 20 to $25^{\circ}$. In addition to cucumber, the fungus was also pathogenic to watermelon, pumpkin and oriental melon. This is the first report on the scab disease of eggplant in Korea.

• Horticultural Science & Technology
• /
• v.30 no.2
• /
• pp.158-161
• /
• 2012

The influence of lysophosphatidylethanolamine (LPE) on anti-senescence of melon leaves and the change in fruit quality during the storage at low temperature were studied. In most of the crops, freshness of leaves is important factor for characteristics of fruits, such as sugar contents, color, and firmness. Melon ($Cucumis$ $melo$ L. cv. Prince) plants were sprayed with LPE at 5 and 3 weeks before commercial harvest. In upper part, LPE treatment showed slight high number of fresh leaf compared to no treatment (None). However, in lower part, LPE resulted in apparent inhibition effect on senescence, showing that lower side of melon plant kept fresh upon LPE application up to about 30%. The SSC of melon treated with LPE was similar to that of fruit from None at harvest. There was no change in soluble solids content (SSC) for all treatment during the storage at $7^{\circ}C$. There were no significant differences in firmness of mesocarp from melons given different treatments at harvest. The firmness of mesocarp from melon treated with LPE was higher than none after 2 weeks storage. The electrolyte leakage means for melon treated with LPE did not differ significantly from the means at initial storage after 2 weeks storage among the treatments. None increased 57% from its initial electrolyte leakage during storage. These results suggest that the application of LPE may have potential to inhibit senescence of leaves and maintain fruit quality during the storage in melon.

• The Plant Pathology Journal
• /
• v.19 no.3
• /
• pp.184-187
• /
• 2003

Verticillium wilt was first observed in 2001 on potatoes (Solanum tuberosum) cv. Superior at Daegwallyong area, one of the major seed potato producing areas in Korea. The wilted potato plants showed typical symptoms including gradual yellowing and interveinal necrosis. There was discoloration in the vascular tissues of the infected stems which turned light brown. Fungal isolates from discolored vascular tissues were whitish to creamy with folding on potato dextrose agar medium, where they used to produce resting dark mycelia but no micro-sclerotia. Conidiophores were septate with side branches, swelled at the base, and arranged in a whorl. Conidia were 2.5-11.2$\times$2.0-4.5 $\mu\textrm{m}$ um in size and were borne in small clusters at the tips of phialides. Optimal temperature range for mycelial growth was $25-30^{\circ}C$. Based on these cultural and morphological characteristics, the fungus was identified as Verticillium albo-atrum Reink & Berth. Pathogenicity tests by root dipping method revealed that the fungus caused the same symptoms as observed in naturally infected potato plants. This is the first report of Verticillium wilt on potato caused by Verticillium albo-atrum in Korea.