• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.28 no.9
• /
• pp.571-576
• /
• 2015

In this study, we developed a lead-free $P_2O_5-V_2O_5-ZnO$ glass frit for sealing OLED using laser irradiation. The frit satisfied the characteristics required for laser sealing such as low glass transition temperature, low coefficient of thermal expansion (CTE), high water-resistance, and high absorption at the wavelength of the laser beam. Ceramic fillers were added to the glass frit in order to further reduce and match its CTE with that of the commercial glass substrate. The addition of Zirconium Tungsten Phosphate (ZWP) to the frit yielded the most desirable results, reducing the CTE to $45.4{\times}10^{-7}/^{\circ}C$, which is very close to that of the glass substrate ($44.0{\times}10^{-7}/^{\circ}C$). Successful formation of a solid sealing layer was observed by optical and scanning electron microscopy.

• Journal of the Korean Society for Heat Treatment
• /
• v.34 no.5
• /
• pp.226-232
• /
• 2021

The relationship between precipitation and coefficient of thermal expansion of Al-6%Si-0.4%Mg-0.9%Cu-(Ti) alloy (in wt.%) after various heat treatments were studied by the thermodynamic analyzer (TMA) and differential scanning calorimetry (DSC). Solution heat treatment of the alloy was carried out at 535℃ for 6 h followed by water quenching, and the samples were artificially aged in the air at 180℃ and 220℃ for 5 h. The coefficient of thermal expansion (CTE) curve showed some residual strain and decreased with increasing aging temperature. The CTE curves changed sharply in the temperature range of 200℃ to 400℃, and the corresponding peak shifted for the aged samples due to the change in the precipitation behavior of the secondary phase. These transformation peaks in the aged sample are related to the volume of the precipitation of the Si phase as determined by DSC analysis. The change in CTE is mainly caused by the precipitation of the Si phase in the Al-Si alloy, and the size of the change occurs simultaneously with the size of the precipitate.

• Korean Journal of Radiology
• /
• v.19 no.6
• /
• pp.1089-1098
• /
• 2018

Objective: To investigate the diagnostic yield of contrast-enhanced computed tomography (CT) in Crohn's disease (CD) patients presenting with acute severe lower gastrointestinal bleeding (LGIB), and the role of CT in predicting the risk of rebleeding. Materials and Methods: A consecutive series of 110 CD patients presenting with acute severe LGIB between 2005 and 2016 were analyzed. Among them, 86 patients who had undergone contrast-enhanced CT constituted the study cohort. The diagnostic yield of CT for detecting contrast extravasation was obtained for the entire cohort and compared between different CT techniques. In a subgroup of 62 patients who had undergone CT enterography (CTE) and showed a negative result for extravasation on CTE, the association between various clinical and CTE parameters and the risk of rebleeding during subsequent follow-up was investigated using Cox regression analysis. Results: The diagnostic yield of CT was 10.5% (9 of 86 patients). The yield did not significantly differ between single-phase and multiphase examinations (p > 0.999), or between non-enterographic CT and CTE (p = 0.388). Extensive CD (adjusted hazard ratio [HR], 3.27; 95% confidence interval [CI], 1.09-9.80; p = 0.034) and bowel wall-to-artery enhancement ratio (adjusted HR, 2.81; 95% CI, 1.21-6.54; p = 0.016) were significantly independently associated with increased rebleeding risks, whereas anti-tumor necrosis factor-${\alpha}$ therapy after the bleeding independently decreased the risk of rebleeding (adjusted HR, 0.26; 95% CI, 0.07-0.95; p = 0.041). Conclusion: The diagnostic yield of contrast-enhanced CT was not high in CD patients presenting with acute severe LGIB. Nevertheless, even a negative CTE may be beneficial as it can help predict the risk of later rebleeding.

• Journal of Life Science
• /
• v.29 no.10
• /
• pp.1144-1151
• /
• 2019

Non-alcoholic fatty liver disease (NAFLD) is a chronic liver disease associated with various metabolic syndromes, such as obesity, dyslipidemia, hypertension, and diabetes. Cudrania tricuspidata is a medicinal plant distributed widely in Asia and has been used in clinical practice to treat various diseases. The aim of this study is to determine the lipid-lowering effects of C. tricuspidata fruit extract (CTE) using a cell model induced by free fatty acids (FFAs). HepG2 cells were exposed to 1mM FFAs (palmitic acid:oleic acid = 2:1) for 24 hr to simulate the conditions of NAFLD in vitro. CTE attenuated the increases of lipid accumulation, intracellular triglyceride, and cholesterol content and inhibited 3-hydroxy-3-methylglutaryl coenzyme A reductase (HMG-CoA reductase) activity in the HepG2 cells in a dose-dependent manner. Also, CTE inhibited the protein expression of lipogenesis-related genes, such as sterol regulatory element-binding protein-1/-2 (SREBP-1/-2), fatty acid synthase (FAS), and stearoyl CoA desaturase-1 (SCD-1) in FFAs-induced lipid accumulation in HepG2 cells. In addition, CTE-induced adenosine monophosphate-activated protein kinase (AMPK) phosphorylation in HepG2 cells. These results suggest that CTE attenuates hepatic lipid accumulation by inhibiting lipogenesis through the modulation of the AMPK signaling pathway on FFAs-induced lipogenesis in HepG2 cells and may potentially prevent NAFLD.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.31 no.3
• /
• pp.116-126
• /
• 2021

Diesel particulate filter (DPF) is a typical application field of cordierite (Mg₂Al₄Si₅O₁₈) honeycomb. Green body for DPF honeycomb was extruded using slurry paste and sintered at the temperature range of 980~1450℃. Quantitative crystal phase analysis was carried out by using Rietveld refinement method for powder XRD data. In conjunction with the quantitative Rietveld analysis, SEM-EDS analysis was carried for the crystal phases (indialite, cordierite, cristobalite, alumina, spinel, mullite, pro-enstatite). After removing amorphous phase on the sintered surfaces by chemical etching method, the shape and composition of the crystal phases can be clearly identified by SEM-EDS method. By combining the Rietveld refinement method and SEM-EDS analysis, crystal phase evolution process in DPF cordierite ceramics could be clarified. In addition, the coefficient of thermal expansion (CTE) of the DPF honeycombs were measured and compared with the calculated CTEs based on the quantitative crystal phase analysis results.

• Korean Journal of Radiology
• /
• v.24 no.4
• /
• pp.305-312
• /
• 2023

Objective: Chronic enteropathy associated with SLCO2A1 gene (CEAS) is a recently recognized disease. We aimed to evaluate the enterographic findings of CEAS. Materials and Methods: Altogether, 14 patients with CEAS were confirmed based on known SLCO2A1 mutations. They were registered in a multicenter Korean registry between July 2018 and July 2021. Nine of the patients (37.2 ± 13 years; all female) who underwent surgery-naïve-state computed tomography enterography (CTE) or magnetic resonance enterography (MRE) were identified. Two experienced radiologists reviewed 25 and 2 sets of CTE and MRE examinations, respectively, regarding the small bowel findings. Results: In initial evaluation, eight patients showed a total of 37 areas with mural abnormalities in the ileum on CTE, including 1-4 segments in six and > 10 segments in two patients. One patient showed unremarkable CTE. The involved segments were 10-85 mm (median, 20 mm) in length, 3-14 mm (median, 7 mm) in mural thickness, circumferential in 86.5% (32/37), and showed stratified enhancement in the enteric and portal phases in 91.9% (34/37) and 81.8% (9/11), respectively. Perienteric infiltration and prominent vasa recta were noted in 2.7% (1/37) and 13.5% (5/37), respectively. Bowel strictures were identified in six patients (66.7%), with a maximum upstream diameter of 31-48 mm. Two patients underwent surgery for strictures immediately after the initial enterography. Follow-up CTE and MRE in the remaining patients showed minimal-to-mild changes in the extent and thickness of the mural involvement for 17-138 months (median, 47.5 months) after initial enterography. Two patients required surgery for bowel stricture at 19 and 38 months of follow-up, respectively. Conclusion: CEAS of the small bowel typically manifested on enterography in varying numbers and lengths of abnormal ileal segments that showed circumferential mural thickening with layered enhancement without perienteric abnormalities. The lesions caused bowel strictures that required surgery in some patients.

• Korean Journal of Radiology
• /
• v.23 no.1
• /
• pp.30-41
• /
• 2022

Objective: Computed tomography enterography (CTE) and magnetic resonance enterography (MRE) are considered substitutes for each other for evaluating Crohn's disease (CD). However, the adequacy of mixing them for routine periodic follow-up for CD has not been established. This study aimed to compare MRE alone with the mixed use of CTE and MRE for the periodic follow-up of small bowel inflammation in patients with CD. Materials and Methods: We retrospectively compared two non-randomized groups, each comprising 96 patients with CD. One group underwent CTE and MRE (MRE followed by CTE or vice versa) for the follow-up of CD (interval, 13-27 months [median, 22 months]), and the other group underwent MRE alone (interval, 15-26 months [median, 21 months]). However, these two groups were similar in clinical characteristics. Three independent readers from three different institutions determined whether inflammation had decreased, remained unchanged, or increased within the entire small bowel and the terminal ileum based on sequential enterography of the patients after appropriate blinding. We compared the two groups for inter-reader agreement and accuracy (terminal ileum only) using endoscopy as the reference standard for enterographic interpretation. Results: The inter-reader agreement was greater in the MRE alone group for the entire small bowel (intraclass correlation coefficient [ICC]: 0.683 vs. 0.473; p = 0.005) and the terminal ileum (ICC: 0.656 vs. 0.490; p = 0.030). The interpretation accuracy was higher in the MRE alone group without statistical significance (70.9%-74.5% vs. 57.9%-64.9% in individual readers; adjusted odds ratio = 3.21; p = 0.077). Conclusion: The mixed use of CTE and MRE was inferior to MRE alone in terms of inter-reader reliability and could probably be less accurate than MRE alone for routine monitoring of small bowel inflammation in patients with CD. Therefore, the consistent use of MRE is favored for this purpose.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.6
• /
• pp.199-209
• /
• 2000

Particles reinforced MMCs have higher specific modulus, higher specific strength, better properties at elevated temperatures and better wear resistance than monolithic metals. But the coefficient of thermal expansion(CTE) of Al6061 is 5 times larger than that of SiCp. The discrepancy of CTE makes some residual stresses inside of MMCs. This work investigates Si$C_p$/Al6061 composites at high temperatures in the microscopic view by three-dimensional elasto-plastic finite element analyses and compares the analytical results with the experimental ones. The theoretical model is not able to consider the nonuniform shape of particle. So the shape of particle is assumed to be perfect global shape. And also particle distribution is not homogeneous in experimental specimen. It is assumed to be homogeneous in simulation model. The type of particle distribution is face-centered cubic array(FCC array). Furthermore, non-homogeneous distribution is modeled by combination of several volume fractions.

• Journal of Korea Foundry Society
• /
• v.22 no.4
• /
• pp.160-166
• /
• 2002

The structure and properties of Fe-29Ni-17Co alloy which had been melted using induction furnace in air atmosphere and than electroslag-remelted were investigated. The oxygen content was reduced to 0.03% when the ingot was refined from $0.09{\sim}0.12%$ of that air melted. The amounts of spheroidal oxides inclusions and gas porosities of ingot were markedly reduced by the ESR process. CTE of ESR ingot contained small amount of oxides and porosities was found to be lower than that of AIM ingot, and tensile properties of ESR ingot and plate were found to be superior than that of AIM ingot and plate.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07b
• /
• pp.1245-1247
• /
• 2005

Glass frit was selected to be a $Bi_2O_3-RO-R_2O_3$ system as a sealing material to replace the current PbO system in PDP. Fillers such as a zircon, cordierite and ${\beta}-eucryptite$ were added for the control of thermal expansion coefficient (CTE), flowability and strength for sealing. At $450-500^{\circ}C$, reaction of frit and filler and interface were evaluated by a flow button test and SEM observation. The composite (frit and filler) showed CTE in the range of 70-83 x $10^{-7}/K$ and flowability of 14-20mm. It can be a candidate for the replacement of PbO system.