• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2009.01a
• /
• pp.821-824
• /
• 2009

A method to visualize human body is proposed for various human pose. The method affords three 3D-styles of the same body: firstly, one which wares clothes specified from pattern of dresses, second, body shape, lastly bone structure of body. For this objective, standard body data are prepared which is constructed from CT images. Individual body is measured by 3D body scanner. The present status of our research is limited to offer still images, though we are engaged to accommodate various poses.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.12
• /
• pp.205-212
• /
• 2003

Many people are exposed to accidents by vehicles or sports. The most frequent injuries by these accidents is concerned with a knee joint. The three-dimensional surface model of a knee is needed for dynamic analysis of knee motion and knee reconstruction. three-dimensional motion data of a knee joint were obtained using X-ray and precise magnetic sensors. The surface data of a femur and a tibia were obtained using cross-sectional pictures by CT. The three-dimensional surface models of a femur and a tibia were made by the method of optimal triangular patch. Using obtained motion data, we simulated the motion of three-dimensional knee joint model.

• Journal of Institute of Control, Robotics and Systems
• /
• v.17 no.4
• /
• pp.382-387
• /
• 2011

In this paper, a LBCC (Latter Bank Cooling Control) for the high strength steel is proposed to obtain the desirable temperature and the property of the material along the longitudinal direction of the steel on the ROT (Run-Out Table) process. A cooling valve is modeled to analyze the response of the ROT banks. The control concept is derived from a field data, a valve model considering the valve response and a TTT (Time-Temperature Transformation) diagram. The proposed control is verified from the simulation results under the various carbon quantities. It is shown through the field test of the hot strip mill that the deviation of the CT (Coiling Temperature) is considerably decreased by the proposed temperature control.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.7
• /
• pp.1803-1813
• /
• 1996

This paper describes an automatic threshold decision using a maximum mismatched correlation value in the direct sequence spread spectrum (DS-SS) system. For received PN codes with different single-to-noise ratio (SNR), this scheme is able to detect a desired threshold value in the search mode, i.e. a maximum mismstched correlation value, so that value is utilized as a threshold for the verification mode. Performance of the proposed scheme in both the additive white gaussian noise (AWGN) and frequency-selective Rayleigh fading channels is analyzed through the Monte Carlo simulation. And hardware implementation of this scheme using a DSP processor is demonstrated. The proposed acquisition shceme is compared to the conventional constant threshold (CT) scheme, and significant improvement of performance is shown. Analysis of system performance in the verification mode is presented, and key quantities such as the false alarm probability and the detection probability are derived in a AWGN channel.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.52 no.3
• /
• pp.158-164
• /
• 2003

This paper proposes a percentage current differential relaying algorithm for bus protection using an advanced compensating algorithm of the secondary current of current transformers (CTs). The compensating algorithm estimates the core flux at the start of the first saturation based on the value of the second-difference of the secondary current. Then, it calculates the core flux and compensates distorted currents using the magnetization curve. The algorithm Is unaffected by a remanent flux. The simulation results indicate that the proposed algorithm can discriminate internal faults from external faults when the CT saturates. This paper concludes by implementing the algorithm into a TMS320C6701 digital signal processor. The results of hardware implementation are also satisfactory. The proposed algorithm can improve not only stability of the relay in the case of an external fault but sensitivity of the relay in the case of an internal fault.

• Journal of the Korean Society of Visualization
• /
• v.18 no.3
• /
• pp.96-102
• /
• 2020

Oral cancer surgery changes the morphologic characteristics of the human upper airway. These changes can affect the flow patterns. In this study, computational fluid dynamics (CFD) simulations with transient solver were performed to numerically investigate the air flows in the human upper airways depending oral cancer surgery. 3D reconstructed models were obtained from 2D CT images of one patient. For the boundary condition, the realistic breathing cycle of human was applied. The hydraulic diameters of cross-sections for post-surgical model are changed greatly along streamwise direction, so these variations can cause higher wall shear stress and flow disturbance compared to pre-surgical model. The recirculation flows observed in the protruding region result in the relatively large pressure drop. These results can be helpful to understand the flow variations after resection surgery of oral cancer.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.29 no.4
• /
• pp.351-359
• /
• 2009

We have developed a computer simulator fur cone-beam computed tomography (CBCT) based on the commercial Monte Carlo code, MCNP. All the functions to generate input files, run MCNP, convert output files to image data, reconstruct tomographs were realized in graphical user-interface form. The performance of the simulator was demonstrated by comparing with the experimental data. Although some discrepancies were observed due to the ignorance of the detailed physics in the simulation, such as scattered X-rays and noise in image sensors, the overall tendency was well agreed between the measured and simulated data. The developed simulator will be very useful for understanding the operation and the better design of CT systems.

• The Journal of the Korea Contents Association
• /
• v.12 no.3
• /
• pp.480-486
• /
• 2012

There has been an increasing interest in new industry and demand creations by the convergence and integration between IT and infrastructure and BT, NT, and CT and the convergence of IT and spread of cloud computing have changed the IT service environment. Even in the educational field, the convergence and integration of contents with various IT have rapidly emerged and learning equipments for the educational purpose have expanded to the mobile media platform from PCs so that learning without limitations to time, place and equipment has become possible. Contents necessary for the smart education are under way by research development utilizing cyber reality and simulation, and 3D technologies. The purpose of this study is to propose marine contents use and service plans for the educational purpose in order to produce various types of contents for the marine life and environment, to improve the school achievement by stimulating interest and to provide individually customized learning.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.3
• /
• pp.199-208
• /
• 2014

At present, the effect of oriental treatment system is proved in the west and using the data of tongue and pulse of body, the doctor can decide the patient's body state without Xray and CT data of large machines. In this paper, the patient's medical data is transmitted to the doctor and the real time decision algorithm is developed and so the doctor can decide the medical treatments. Using the mobile phone, the pulse data and bio data can be sent to the doctor and therefore the patients, who can't care in real time, can be treated in real time in the impossible medical treatment areas. Therefore in this paper, the oriental medical treatment system algorithm and artificial intelligence electrical needle simulation are processed for real time and checked and treated, so anyone can decide patient's state using mobile phone.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37C no.11
• /
• pp.1084-1093
• /
• 2012

For large multihop networks, large time synchronization (TS) errors can accumulate with conventional methods, such as TPSN, RBS, and FTSP, since they need a large number of hops to cover the network. In this paper, a method combining Concurrent Cooperative Transmission (CCT) and Semi- Cooperative Spectrum Fusion (SCSF) is proposed to reduce the number of hops to cover the large network. In CCT, cooperating nodes transmit the same digitally encoded message in orthogonal channels simultaneously, so receivers can benefit from array and diversity gains. SCSF is an analog cooperative transmission method where different cooperators transmit correlated information simultaneously. The two methods are combined to create a new distributed method of network TS, called the Cooperative Analog and Digital (CANDI) TS protocol, which promises significantly lower network TS errors in multi-hop networks. CANDI and TPSN are compared in simulation for a line network.