• Journal of Mechanical Science and Technology
• /
• 제15권1호
• /
• pp.52-60
• /
• 2001

In this paper, as a new measurement method to estimate the change of material condition, the simplified ultrasonic CT system, which uses the information of three directions, that is, $90^{\circ}$, $+45^{\circ}C$and $-45^{\circ}C$ about inspection plane is proposed. Use of simplified CT system has two merits: Firstly, the measurement time is very short compared with general CT. Secondly, it can detect sensitively small defect in vertical or slant direction about inspection plane because the obtained image is CT image calculated from three directions. From these merits, this method can be considered as an effective method to evaluate material conditions. The basic performance of the proposed method was confirmed through several specimens with several simple defects. In order to confirm the applicability of actual NDT, several kinds of welded specimens are investigated. The result showed that the CT image obtained had good agreement with actual defect of specimens.

• 대한방사선기술학회지:방사선기술과학
• /
• 제27권3호
• /
• pp.13-18
• /
• 2004

고해상 측두골 CT소견상 안면신경관의 변화를 분석하여 안면신경관의 불연속성 뿐 아니라 신경관의 전이나 골편 등 안면신경관을 직접 침범하는 소견과 직접 안면신경관의 손상은 없으나 신경관이 확장되어 보이거나 인접부위에 골절을 보이는 간접소견을 관찰할 수 있었다. 난청, 현훈 그리고 안면신경마비의 경우 CT만으로 원인 병변을 규명하는 것은 한계가 있어 이 경우 임상소견과의 비교는 필수적이며 본 연구에서는 고해상 CT의 이상소견이 비교적 정확한 것으로 나타났다.

• 한국산업융합학회 논문집
• /
• 제11권4호
• /
• pp.195-199
• /
• 2008

The carbon fiber has low x-ray absorption property and high stiffness. This is the reason why many CT(Computed Tomography) manufacturer use carbon fiber in couch tabletop for CT scanner. In this paper, we design and make the couch tabletop made of carbon fiber composite, and verify the validity in CT scanner. In designing the couch tabletop, to determine the aluminum equivalent thickness of couch tabletop, we evaluate X-ray the transmissivity of aluminum and carbon plate in 80-120kVp X-ray energy range. And we perform structural analysis and mechanical design using determined thickness of carbon sheet. In conclusion, it was evaluated that manufactured couch tabletop satisfies X-ray transmissivity and mechanical requirements in CT scanner.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 A
• /
• pp.310-312
• /
• 2004

Generally, instrument transformer of the core type have been used for measuring current. Because instrument transformer has defects, electronic instrument was appeasred. This paper is introduced a basic concept and thoery of electronic instrument and described the the simulation of core type CT and no saturation CT. The evaluation of CT models implemented using EMTP(Electro Magnetic Transients Program) was carried out. The result of comparison both core type CT and no saturation CT are presented.

• 대한임상검사과학회지
• /
• 제36권2호
• /
• pp.193-198
• /
• 2004

PET/CT combines the functional information from a positron emission tomography (PET) exam with the anatomical information from a computed tomography (CT) exam into one single exam. A CT scan uses a combination of x-rays and computers to give the radiologist a non-invasive way to see inside your body. One advantage of CT is its ability to rapidly acquire two-dimensional pictures of your anatomy. Using a computer these 2-D images can be presented in 3-D for in-depth clinical evaluation. A PET scan detects changes in the cellular function - how your cells are utilizing nutrients like sugar and oxygen. Since these functional changes take place before physical changes occur, PET can provide information that enables your physician to make an early diagnosis. The PET exam pinpoints metabolic activity in cells and the CT exam provides an anatomical reference. When these two scans are fused together, your physician can view metabolic changes in the proper anatomical context of your body. PET/CT offers significant advantages including more accurate localization of functional abnormalities, and the distinction of pathological from normal physiological uptake, and improvements in monitoring treatment. A PET/CT scan allows physicians to measure the body's abnormal molecular cell activity to detect cancer (such as breast cancer, lung cancer, colorectal cancer, lymphoma, melanoma and other skin cancers), brain disorders (such as Alzheimer's disease, Parkinson's disease, and epilepsy), and heart disease (such as coronary artery disease).

• 대한방사선기술학회지:방사선기술과학
• /
• 제39권2호
• /
• pp.193-198
• /
• 2016

임상적으로 computed tomography (CT)에서 정기적인 quality assurance (QA)는 요구되는 사항이다. 본 논문에서는 CT 검사에서 공간분해능에 대해서 AAPM Phantom을 이용하여 정확한 성능 분석을 위해 변조전달함수를 평가하고자 한다. CT장비는 dual source somatom definition flash (siemens healthcare, forchheim, Germany), brilliance 64 (phili ps m edi cal system N etherlands), a qui li on 64 (toshiba m edi cal system, Japan)를 사용하였으며, l mage J (wayne rasband national institutes of health, USA)프로그램을 실행하여 변조전달함수의 측정 방법인 chart method를 이용하여 영상에 대해서 정량적인 평가방법을 시행하였다. 변조전달함수를 이용하여 평가한 결과, 공간주파수를 이용한 데이터 값이 높아짐에 따라 변조전달함수는 감소됨을 알 수 있었다. 그리고 CT 장비에서 변조전달함수는 공간주파수(50%)에 있어서는 0.58, $0.28\;0.59mm^{-1}$으로 나타났으며, 변조전달함수 공간주파수(10%)에 있어서는 1.63, $0.89\;1.21mm^{-1}$으로 나타났다. 본 연구에서는 chart method를 이용하여 변조전달함수의 공간해상력에 대한 특성을 확인하고, 정량적인 평가방안을 제시하였다는 점에서 학술적 의의를 둘 수 있다.

• 정보교육학회논문지
• /
• 제20권6호
• /
• pp.553-562
• /
• 2016

소프트웨어 교육이 학습자의 Computational Thinking(CT) 역량 계발을 지향하고 있지만 CT역량 계발을 위해 수업을 설계하고 CT역량 계발 효과를 측정하는 것에는 아직 많은 연구가 필요한 실정이다. 본 연구의 목적은 예비교원의 CT 역량을 계발하기 위해 CT기반으로 설계된 교재를 활용하여 SW교육을 진행하고 본 수업이 예비교원의 CT 역량에 미치는 영향을 알아보는 것이다. 본 연구에서는 문헌 연구를 통해 CT의 다섯 가지 주요 세부 역량을 알고리즘적 사고, 평가, 분해, 추상화 및 일반화로 설정하였다. 본 연구의 대상은 국내 한 교육대학교에서 한 학기 동안 수업을 수강한 47명의 예비교원이며, CT관련 설문을 개발하여 실시하고 팀프로젝트를 CT의 세부 핵심 역량에 초점을 두고 질적으로 분석하여 연구 결과를 도출하였다. 본 연구의 결과는 예비교사가 지각한 CT경험과 프로젝트를 통해 나타난 CT세부 핵심 역량 측면의 질적 분석을 통해 향후 교원양성기관에서의 소프트웨어 교육의 교수설계 및 운영에 대해 시사점을 제공하고 있다는 점에서 의의가 있다.

• Radiation Oncology Journal
• /
• 제32권1호
• /
• pp.31-42
• /
• 2014

Purpose: To evaluate the usefulness of positron emission tomography/computed tomography (PET/CT) for field modification during radiotherapy in esophageal cancer. Materials and Methods: We conducted a retrospective study on 33 patients that underwent chemoradiotherapy (CRT). Pathologic findings were squamous cell carcinoma in 32 patients and adenocarcinoma in 1 patient. All patients underwent PET/CT scans before and during CRT (after receiving 40 Gy and before a 20 Gy boost dose). Response evaluation was determined by PET/CT using metabolic tumor volume (MTV), total glycolytic activity (TGA), MTV ratio (rMTV) and TGA ratio (rTGA), or determined by CT. rMTV and rTGA were reduction ratio of MTV and TGA between before and during CRT, respectively. Results: Significant decreases in MTV ($MTV_{2.5}$: mean 70.09%, p < 0.001) and TGA ($TGAV_{2.5}$: mean 79.08%, p < 0.001) were found between before and during CRT. Median $rMTV_{2.5}$ was 0.299 (range, 0 to 0.98) and median $rTGAV_{2.5}$ was 0.209 (range, 0 to 0.92). During CRT, PET/CT detected newly developed distant metastasis in 1 patient, and this resulted in a treatment strategy change. At a median 4 months (range, 0 to 12 months) after completion of CRT, 8 patients (24.2%) achieved clinically complete response, 11 (33.3%) partial response, 5 (15.2%) stable disease, and 9 (27.3%) disease progression. $SUV_{max}$ (p = 0.029), $rMTV_{50%}$ (p = 0.016), $rMTV_{75%}$ (p = 0.023) on intra-treatment PET were found to correlate with complete clinical response. Conclusion: PET/CT during CRT can provide additional information useful for radiotherapy planning and offer the potential for tumor response evaluation during CRT. $rMTV_{50%}$ during CRT was found to be a useful predictor of clinical response.

• 한국의학물리학회지:의학물리
• /
• 제26권4호
• /
• pp.229-233
• /
• 2015

정위 방사선치료를 받은 폐암환자에서 결과를 후향적으로 분석하고자 하였다. 연속된 흉부 컴퓨터단층촬영(CT)의 종양의 크기변화 분석을 통해 치료 반응 평가를 조사하였다. 11명의 초기 비소세포폐암환자를 대상으로 정위 방사선치료 선량의 중앙값은 6,000 cGy이고 분할 조사 회수의 중앙값은 5회였다. 경과 관찰기간의 중앙값은 28개월로 치료후 종양의 크기 변화는 총 51회의 CT를 통해 분석하였고, 각 환자당 중앙값 3회의 CT 촬영이 시행되었다. 본 연구에서 치료의 총 반응률은 90.9%로 5명의 환자에서 완전관해와 5명에서 부분관해가 관찰되었다. 부분관해와 완전관해까지의 기간의 중앙 값은 각각 3개월과 5개월이었다. 경과관찰에서 3명의 환자가 병의 진행양상을 나타내었다. 본 연구에서 초기 폐암의 정위방사선치료후 CT 분석을 통해 반응 평가와 함께 치료 반응 시점을 확인할 수 있었다.

• Journal of Korean Neurosurgical Society
• /
• 제54권5호
• /
• pp.384-389
• /
• 2013

Objective : Use of quantitative computed tomography (CT) to evaluate bone mineral density was suggested in the 1970s. Despite its reliability and accuracy, technical shortcomings restricted its usage, and dual-energy X-ray absorptiometry (DXA) became the gold standard evaluation method. Advances in CT technology have reduced its previous limitations, and CT evaluation of bone quality may now be applicable in clinical practice. The aim of this study was to determine if the Hounsfield unit (HU) values obtained from CT correlate with patient age and bone mineral density. Methods : A total of 128 female patients who underwent lumbar CT for back pain were enrolled in the study. Their mean age was 66.4 years. Among them, 70 patients also underwent DXA. The patients were stratified by decade of life, forming five age groups. Lumbar vertebrae L1-4 were analyzed. The HU value of each vertebra was determined by averaging three measurements of the vertebra's trabecular portion, as shown in consecutive axial CT images. The HU values were compared between age groups, and correlations of HU value with bone mineral density and T-scores were determined. Results : The HU values consistently decreased with increasing age with significant differences between age groups (p<0.001). There were significant positive correlations (p<0.001) of HU value with bone mineral density and T-score. Conclusion : The trabecular area HU value consistently decreases with age. Based on the strong positive correlation between HU value and bone mineral density, CT-based HU values might be useful in detecting bone mineral diseases, such as osteoporosis.