• Proceedings of the KSME Conference
• /
• 2001.06e
• /
• pp.282-287
• /
• 2001

The CSCM Upwind method and Material Transport Analysis (MTA) have been used to predict the thermal response and ablation rate for non-charring material to be used as thermal protection material (TPM) in KSR-III test rocket nozzle. The thermal boundary conditions such as cold wall heat-transfer rate and recovery enthalpy for MTA code are obtained from the upwind Navier-Stokes solution procedure. The heat transfer rate and temperature variations at rocket nozzle wall were studied with shape change of the nozzle surface as time goes by. The surface recession was severely occurred at nozzle throat and this affected nozzle performance such as thrust coefficient substantially.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.5 no.4
• /
• pp.88-96
• /
• 2002

The CSCM Upwind method and Material Transport Analysis(MTA) have been used to predict the thermal response and shape changes for charring/non-charring material which can be used as thermal protection material(TPM) on blunt-body nose tip. We performed intensive flight trajectory simulations to compare 1-D MTA results with those of 2-D/Axisymmetric MTA by using MTAs and Navier-Stokes code. Theheat-transfer rate and pressure distribution were predicted at selected altitudes and wall temperature along the flight trajectory and the shape changes of blunt-body nose tip were predicted subsequently by using current procedure.

• 한국전산유체공학회:학술대회논문집
• /
• 2003.08a
• /
• pp.69-75
• /
• 2003

본 연구에서는 격자 생성, 초기유동조건 및 경계조건 설정 등 일련의 전처리 과정을 사용자에게 친숙한 그래픽 인터페이스 환경으로 개발하였다. MFC/Visual C++를 이용하여 개발된 전처리 프로그램은 Windows 계열의 OS와 호환이 가능하며, 기하학적 격자생성, 초기값 설정 및 수치해석 코드의 제어변수를 생성할 수 있다. 한편 사용자의 편의를 위해서 전처리 과정을 격자생성(단일격자생성, 다중격자생성), 유체 물성치정의, 경계조건 생성, 초기조건 생성 및 코드제어로 구분하였다. 개발된 전처리 프로그램의 특성으로서 다중 격자 생성 작업을 단일 격자계의 중첩으로 구성될 수 있도록 각 경계면을 "interface"형을 취하는 기능을 제공하도록 하였으며 개발된 전처리 과정을 16도의 경사면을 가지는 Compression ramp 문제 및 축대칭 Bump 문제에 적용하여 개발된 전처리 과정을 검증하였다.

• 한국전산유체공학회:학술대회논문집
• /
• 2003.08a
• /
• pp.76-81
• /
• 2003

전산유체공학에서 그래픽 인터페이스를 이용한 후처리 기법은 수렴된 해의 물리적 구조 및 특성을 이해하는데 있어 매우 중요하다. 따라서 본 연구에서는 그래픽 환경을 이용하여 압축성 유동 해석 코드인 CSCM 수치해석 코드의 후처리 과정을 개발함으로서 코드전체의 완전성을 높이고자 하였다. Visual C++프로그램을 이용하여 Mesh plot, XY plot, 벡터 plot 및 contour plot이 가능한 후처리 프로그램을 개발하였으며 실시간으로 수치해석의 수렴정도를 파악할 수 있는 잔류항에 대한 그래픽 기능을 제공하게 하였다. 개발된 후처리 과정을 2차원 Compression ramp 및 Bump 문제의 해석결과에 대해 본 연구결과와 현재 유체해석의 후처리 프로그램으로 많은 사용자를 확보하고 있는 AMTEC사의 Tecplot 8.0 버전의 결과를 서로 비교해 본 결과 좋은 일치성을 보여주었다.

• 한국전산유체공학회:학술대회논문집
• /
• 2003.10a
• /
• pp.279-280
• /
• 2003

• 한국전산유체공학회:학술대회논문집
• /
• 1998.11a
• /
• pp.78-83
• /
• 1998

A finite-difference method based on conservative supra characteristic method(CSCM) type upwind flux difference splitting has been studied on the bluntness effect on the wall heat transfer rate and wall pressure over blunt-body. The results show that the stagnation heating varies inversely with the square root of the nose radius.

• Korean Journal of Pharmacognosy
• /
• v.19 no.3
• /
• pp.153-169
• /
• 1988

The combined use of the J-modulated selective INEPT and CSCM 1DNMR techniques is described for the structure elucidation of several new classes of compound including prionitin, the loureirins and larreantin, and for the regiosubstitution of the furanonaphthoquinones. Spectroscopic studies on the conformation of the cytotoxic agent savinin are also described, together with the NMR assignments and preliminary biosynthetic experiments on the antitumor antibiotic staurosporine.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.26 no.2
• /
• pp.157-164
• /
• 2013

In this study, the structural performance of nuclear power plant containment buildings, which are made of steel fiber reinforced concrete(SFRC) and subject to aircraft crash, is examined by finite element analyses. The applied loads by aircraft crash against the buildings are modeled using Riera impact load function and by the varying aircraft contact area with respect to time. CSCM concrete model in LS-DYNA is employed to model SFRC. The parameters for the material model are determined from SFRC strength prediction models. Based on the volume ratio of steel fiber in SFRC, the structural performance of nuclear containment buildings subject to aircraft crash are analysed using a commercial finite element analysis program LS-DYNA. The safety assessments of the buildings subject to the crash are discussed and the effectiveness of SFRC for nuclear power plant containment building on the increase of aircraft crash resistance is also evaluated.

• Transactions of the Korean hydrogen and new energy society
• /
• v.28 no.3
• /
• pp.287-294
• /
• 2017

EVs manufacturers typically target a range of 300 km on a fully charged battery. Many studies have been conducted to improve these disadvantages. As a results, the mileage of EVs is expected to increase significantly. However, as the distance traveled by EVs increases, current test method (SCT) have many difficulties. The biggest problem is that it takes a lot of time to test an EVs and greatly increases the error rate during the test period. In order to solve these problems, this paper discusses the fuel economy test method of EVs for energy efficiency and mileage. The comparison of test methods was achieved by chassis dynamometer test about EVs. These review of test methods are intended to both improve testing efficiency and provide a practical testing methodology that can be easily adapted to accommodate future testing enhancements. In conclusion, the results of MCT mode and SCT mode comparison show similar results within 3 %, confirming that the test method is appropriate. Also, as the CSCM distance becomes shorter in the MCT mode, the mileage becomes longer and the fuel economy becomes lower. As a result, the error from the SCT test results is expected to increase. In order to minimize the error of SCT measurement fuel economy, it is recommended to maximize the CSCM driving distance. However, since the timing of the EOT is not clearly known, it is reasonable to define the allowable range of the CSCE to be within 20 % of the MCT total mileage.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.3
• /
• pp.653-661
• /
• 1994

In this paper the CSCM type upwind flux difference splitting Navier-Stokes method has been applied to study the ARL-SL19 supersonic/transonic compressor cascade flow. H-type grid was chosen for its simplicity in applying cyclic tridiagonal matrix algorithm along with conventional slip/no-slip boundary conditions. The thin-layer algebraic model of Baldwin-Lomax was employed for the calculation of turbulent flows. The test case inlet Mach No. was 1.612 and inlet/exit pressure ratio($P_2/P_1$) was 2.15. The results were compared with experimental results from current method were compared well in suction surface with the experiments and other computational results; however, not well in pressure surface. It might be due to the complex flowfields such as shock/boundary layer interaction, turbulence, and flow separation, etc. In the future, a proper turbulence modelling and adaptive grid system will be studied to improve the solution quality.