• 대한화학회지
• /
• 제48권4호
• /
• pp.371-378
• /
• 2004

기존의 $SrGa_2S_4:Eu^{2+}$ 녹색 발광 형광체는 주로 CRT (Cathode Ray Tube)용이나 FED (Field Emission Display), 그리고 EL (Electroluminescence)용 발광소자로 많이 연구되어졌다. 현재는 장파장 영역의 여기 특성을 이용한 LED (Light Emitting Diode)용 형광체로 주목 되어지고 있다. $SrGa_2S_4:Eu^{2+}$ 형광체의 일반적 합성 방법은 Flux를 이용하여 인체에 유해한 $H_2S$나 $CS_2$ 기체를 사용할 뿐만 아니라 높은 합성온도, 긴 반응시간 및 공정이 복잡한 단점을 지니고 있다. 따라서 본 실험은 황화물계 원료인 SrS, $Ga_2S_3$ 그리고 EuS를 출발 물질로 하여 $H_2S$ 기체를 사용하지 않고 혼합 기체$(5% H_2/95% N_2)$를 사용해 환원 분위기 하에서 $SrGa_2S_4:Eu^{2+}$을 합성하였다. 그리고 다양한 합성 조건과 LED용으로 사용되기 위해 수세처리와 Sieving 과정을 거친 형광체의 발광특성을 검토하였다.

• 한국응용과학기술학회지
• /
• 제23권3호
• /
• pp.243-251
• /
• 2006

Field emission display(FED) is actively investigated in view of the development of full color flat-panel display, which can replace some cathode-ray tube(CRT). Thus, the development of new phosphors appropriate for FED is urgently needed and has been actively investigated. In this work, $SrTiO_3:Pr^{3+}$ phosphor was prepared by sol-gel method and the coating was applied by sol-gel method combined with sonication on these phosphor's surface into diluted precursor solution. It was found that very fine particles of coating material were formed on phosphor's surface. The luminescent intensity of $SrTiO_3:Pr^{3+}$ phosphor coated with $SiO_2$ and $Al_2O_3$ was considerably increased without any noticeable change in color chromaticity. The optimum concentration of coating material was found to be 1wt% and the optimum pH value of the solution was 10.

• 대한전자공학회논문지SP
• /
• 제38권5호
• /
• pp.529-537
• /
• 2001

대형 디스플레이 화면에 대한 소비자의 선호도가 증가함에 따라 3관식 프로젝션 (projection) 텔레비전의 수요가 늘고 있다. 그러나 3관식 HD (high definition) 프로젝션 TV에서는 직시형 CRT (Cathode Ray Tube)를 사용하는 TV보다는 단위 면적당 절대 밝기가 어둡다. 또한 프로젝션 TV에 사용되는 인광체의 색재현 영역 (gamut)이 기존의 NTSC (National Television System Committee) 표준과 다른 것을 사용하고 있다. 본 논문에서는 3관식 프로젝션 HDTV의 RGB 인광체 좌표와 RGB 빔 전류비의 관계를 색온도 변화에 대하여 해석하고, 전류비에 따른 빔 프로파일의 변화에 의한 영상의 열화와 시각 특성인 Helmholtz-Kohlrausch 효과를 고려하여 시청자가 느끼는 밝기를 최대화하기 위한 기준 백색 (reference white)의 범위를 제안하였다.

• 소성∙가공
• /
• 제20권1호
• /
• pp.11-16
• /
• 2011

Recently, according to the rapid development of display, many display applications, such as, cellular phone, navigation, monitor and LCD TV have been changed from CRT type to LCD type. BLU(Back Light Unit) is one of main parts in LCD unit and generally, it consists of a light source, a reflective sheet, a LGP(Light Guide Plate), a diffuser sheet, and two prism sheets. The most important component of BLU is a light guide plate, which diffuses the input light to the TFT-LCD module uniformly. The LGP is usually made by injection molding process, and it has numerous optical micro patterns on the surface. In the present study the micro-patterned stamper which has cylindrical shape was fabricated by using the UV-LiGA process. And the replication characteristics have been compared among three different kinds of injection molding process; general injection molding, injection/compression molding and RHCM(Rapid Heating and Cooling Molding). Average replication ratios of CIM and ICM were 19.1% and 64.6%, respectively. On the other hand, the average replication ratio of RHCM process showed the higher value of 98.4% among these. It show that maintaining the mold surface above $T_g$ could increase the replication ratio of micro patterns substantially.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1996년도 춘계학술대회 논문집
• /
• pp.59-62
• /
• 1996

Plasma displays (PDP) as a large area wall-hanging display device are rabidly developed with flat CRT, TPT LCD and etc. Especially, AC Plasma Display Panels(AC PDPs) have the inherent memory function which is effective for large area displays. The memory function in AC PDPs is caused by the accumulation of the electrical charge on the protecting layer formed on the dielectric layer. This MgO protective layer prevents the dielectric layer from sputtering by ion in discharge plasma and also has the additional important roll in lowering the firing voltage due to the large secondary electron emission coefficient). Until now, the MgO Protective layer is mainly formed by E-Beam evaporation. With increasing the panel size, this process is difficult to attain cost reduction, and are not suitable for large quantity of production. To the contrary, the methode of shuttering are easy to apply on mass production and to enlarge the size of the panel and shows the superior adhesion and uniformity of thin film. In this study, we have prepared MgO protective layer on AC PDP Cell by reactive magnetron sputtering and studied the effect of MgO layer on the surface discharge characteristics of ac PDP.

• 패션비즈니스
• /
• 제2권1호
• /
• pp.12-24
• /
• 1998

The purpose of this study is to investigate the efficiency of systematic color combination for apparel and textile design. We planned the new color systems, HUE AND TONE COLOR SYSTEM 277 and HUE AND TONE COLOR SYSTEM 253 USED KOREAN TRADITIONAL COLORS. In order to emprove the efficiency, this study aims to explore the development of systematic color combination by computer graphics. With this purpose, this study progressed in the following order and we obtained these results. 1. First, we considered the possibility of the development of the systematic color combination used the new color system, HUE AND TONE COLOR SYSTEM 277. We considered the possibility of the development of the systematic color combination by graphic computer SDS-480. Through the experimental regulation of the RGB (Red, Green, Blue) and HLS (Hue, Lightness, Saturation) we obtained an approximation of the colors of the HUE AND TONE COLOR SYSTEM 277 on the CRT display of SDS-480. 2. We planned the new color system, HUE AND TONE COLOR SYSTEM 253 USED KOREAN TRADITIONAL COLORS for systematic color combination. 3. In a practical application, we tried five principal types of color combination in apparel and textile design, monochromatic combination, tone on tone combination, moderate combination, tonal combination, and contrast combination. 4. Furthermore, we applied the systematic color combination for the textile patterns by tone on tone combination. By using the systematic color combination for apparel and textile design, we realized the efficiency and utility of the systematic color combination.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2008년도 하계학술대회 논문집
• /
• pp.553-555
• /
• 2008

현재 사용하고 있는 LCD(Liquid Crystal Display) Backlight용 램프는 주로 CCFL(Cold Cathod Fluorescent Lamp)과 EEFL(External Electrode Fluorescent Lamp)이 사용되고 있다. 하지만 이 램프는 수은을 사용하여 RoHS(the Restriction of the use of certain Hazardous Substances in electrical and electronic equipment)규제가 점점 강화되면서 사용이 제한되고 있으며, 이에 따라 수은을 사용하지 않는 램프의 제작이 불가피해지고 있다. 또한 LCD TV는 CRT와 PDP와는 다른 LCD만의 Hold-type 특성과 LC(Liquid Crystal)의 응답속도로 인하여 Motion Blur현상이 나타나는 단점이 있다. 본 논문에서는 RoHS 규제를 만족시키는 무수은 면광원 램프를 구동하기 위한 인버터를 제안한다. 제안한 인버터는 포워드 방식을 사용하여 반도체 소자 및 자기 소자의 수를 줄여서 구동회로가 간단하다. 또한 면광원 램프를 세로방향으로 6블록으로 나누어 스캔구동을 하여 Motion Blur현상을 저감 시켰다. 끝으로 실험을 통하여 제안한 인버터의 유용성을 입증하였다.

• 농업과학연구
• /
• 제17권2호
• /
• pp.115-129
• /
• 1990

This study was carried out to develop a microcomputer-based data acquisition system and software for analysis of engine vibration. Due to this development of system and software, studies on the vibration of engine was able to conduct efficiently. From the display of CRT, the outputs of test was compared and analysed on a zero-base motoring. The results obtained are summarized as follows : 1. Data acquisition system in microcomputer were designed and programmed and operated accurately. 2. The result of test was easily compared in monitoring of zero-base at color monitor. 3. This system and program developed was able to control the measuring intervals, no. of channels, and no. of data as wated. 4. The type of vibration of engine was type of bi-mode from the FFT and statistical analysis. 5. The maxima of engine vibration were 9.11 G at X-axis. 11.27 G at Y-axis, and 4.9 G at Z axis for full load of net output 6. The maxima of engine vibration unloaded were 4.28 G, 5.59 G, 2.68 G at 2200 rpm.

• 대한의용생체공학회:의공학회지
• /
• 제18권1호
• /
• pp.17-24
• /
• 1997

We have developed a patient monitoring system including module-based bedside monitors, interbed network, central stations, clinical workstations, and DB servers. A bedside monitor with a color LCD can accommodate up to 3 module cases and 21 different modules. Six different physiological parameters of ECG, respiration, invasive blood pressure, noninvasive blood pressure, body temperature, and arterial pulse oximetry with plethysmoyaph are provided as parameter modules. In a single bedside monitor, modules and a module controller communicate with IMbps data rate through an intrabed network based on RS-485 and HDU protocol. At the same time, it communicates with other bedside monitors and central stations through interbed network based on 1 OMbps Ethernet and TCP/IP protocol. Central stations using 20" color CRT monitors can be connected with many bedside monitors and they display 18 channels of waveforms simultaneously. Clinical workstations are used mainly for the review of patient datE In order to accommodate more advanced data management capabilities such as 24-hour full disclosure, we have developed a relational database server dedicated to the patient monitoring system. Software for bedside monitor, central station, and clinical workstation fully utilizes graphical user interface techniques and all functions are controlled by a rotate/push button on the bedside monitor arid a mouse on the central station and clinical workstation. The entire system satisfies the requirements of AAMI and ANSI standards in terms of electrical safety and performances.nces.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2006년도 하계종합학술대회
• /
• pp.845-846
• /
• 2006

In this paper, we describe a capacitive position sensing and motion control scheme of a MEMS scanner used for laser display application. The laser displays can be made by scanning laser beams much the same way a CRT scans electron beams. So the accuracy of the scanner motion determines the quality of the displayed image. The MEMS scanner under consideration is composed of electrostatic comb electrodes with initial gap and requires large driving voltage. Due to the under-damping and nonlinear driving characteristics, the scanner motion is subject to be an unwanted oscillation. For the linear scanner motion, we devise a differential charge amplifier and phase compensator. The experimental results show that the implemented feedback control system provides sufficient electrical damping and improves the dynamic performance of the scanner.