• Journal of The Korean Astronomical Society
• /
• v.54 no.3
• /
• pp.103-112
• /
• 2021

The intracluster medium (ICM) is expected to experience on average about three passages of weak shocks with low sonic Mach numbers, M ≲ 3, during the formation of galaxy clusters. Both protons and electrons could be accelerated to become high energy cosmic rays (CRs) at such ICM shocks via diffusive shock acceleration (DSA). We examine the effects of DSA by multiple shocks on the spectrum of accelerated CRs by including in situ injection/acceleration at each shock, followed by repeated re-acceleration at successive shocks in the test-particle regime. For simplicity, the accelerated particles are assumed to undergo adiabatic decompression without energy loss and escape from the system, before they encounter subsequent shocks. We show that in general the CR spectrum is flattened by multiple shock passages, compared to a single episode of DSA, and that the acceleration efficiency increases with successive shock passages. However, the decompression due to the expansion of shocks into the cluster outskirts may reduce the amplification and flattening of the CR spectrum by multiple shock passages. The final CR spectrum behind the last shock is determined by the accumulated effects of repeated re-acceleration by all previous shocks, but it is relatively insensitive to the ordering of the shock Mach numbers. Thus multiple passages of shocks may cause the slope of the CR spectrum to deviate from the canonical DSA power-law slope of the current shock.

• Nuclear Engineering and Technology
• /
• v.55 no.12
• /
• pp.4491-4503
• /
• 2023

This study aimed to verify and validate the transient simulation capability of the hybrid code system RAST-F for fast reactor analysis. For this purpose, control rod (CR) drop experiments involving eight separate CRs and six CR groups in the China Experimental Fast Reactor (CEFR) start-up tests were utilized to simulate the CR drop transient. The RAST-F numerical solution, including the neutron population, time-dependent reactivity, and CR worth, was compared against the measurement values obtained from two out-of-core detectors. Moreover, the time-dependent reactivity and CR worth from RAST-F were verified against the results obtained by the Monte Carlo code Serpent using continuous energy nuclear data. A code-to-code comparison between Serpent and RAST-F showed good agreement in terms of time-dependent reactivity and CR worth. The discrepancy was less than 160 pcm for reactivity and less than 110 pcm for CR worth. RAST-F solution was almost identical to the measurement data in terms of neutron population and reactivity. All the calculated CR worth results agreed with experimental results within two standard deviations of experimental uncertainty for all CRs and CR groups. This work demonstrates that the RAST-F code system can be a potential tool for analyzing time-dependent phenomena in fast reactors.

• Agribusiness and Information Management
• /
• v.8 no.1
• /
• pp.17-26
• /
• 2016

India is largest producer of banana in the world producing 29.72 million tonnes from an area of 0.803 million ha with a productivity of 35.7 MT ha-1 and accounted for 15.48 and 27.01 per cent of the world's area and production respectively (www.nhb.gov.in). In India, Tamil Nadu leads other states both in terms of area and production followed by Maharashtra, Gujarat and Andhra Pradesh. In Rayalaseema region of Andhra Pradesh, Kurnool district had special reputation in the cultivation of banana in an area of 5765 hectares with an annual production of 2.01 lakh tonnes in the year 2012-13 and hence, it was purposively chosen for the study. On $23^{rd}$ November 2003, the Government of Andhra Pradesh has commenced a comprehensive project called 'Andhra Pradesh Micro Irrigation Project (APMIP)', first of its kind in the world so as to promote water use efficiency. APMIP is offering 100 per cent of subsidy in case of SC, ST and 90 per cent in case of other categories of farmers up to 5.0 acres of land. In case of acreage between 5-10 acres, 70 per cent subsidy and acreage above 10, 50 per cent of subsidy is given to the farmer beneficiaries. The sampling frame consists of Kurnool district, two mandals, four villages and 180 sample farmers comprising of 60 farmers each from Marginal (<1ha), Small (1-2ha) and Other (>2ha) categories. A well structured pre-tested schedule was employed to collect the requisite information pertaining to the performance of drip irrigation among the sample farmers and Data Envelopment Analysis (DEA) model was employed to analyze the performance of drip irrigation in banana farms. The performance of drip irrigation was assessed based on the parameters like: Land Development Works (LDW), Fertigation costs (FC), Volume of water supplied (VWS), Annual maintenance costs of drip irrigation (AMC), Economic Status of the farmer (ES), Crop Productivity (CP) etc. The first four parameters are considered as inputs and last two as outputs for DEA modelling purposes. The findings revealed that, the number of farms operating at CRS are more in number in other farms (46.66%) followed by marginal (45%) and small farms (28.33%). Similarly, regarding the number of farmers operating at VRS, the other farms are again more in number with 61.66 per cent followed by marginal (53.33%) and small farms (35%). With reference to scale efficiency, marginal farms dominate the scenario with 57 per cent followed by others (55%) and small farms (50%). At pooled level, 26.11 per cent of the farms are being operated at CRS with an average technical efficiency score of 0.6138 i.e., 47 out of 180 farms. Nearly 40 per cent of the farmers at pooled level are being operated at VRS with an average technical efficiency score of 0.7241. As regards to scale efficiency, nearly 52 per cent of the farmers (94 out of 180 farmers) at pooled level, either performed at the optimum scale or were close to the optimum scale (farms having scale efficiency values equal to or more than 0.90). Majority of the farms (39.44%) are operating at IRS and only 29 per cent of the farmers are operating at DRS. This signifies that, more resources should be provided to these farms operating at IRS and the same should be decreased towards the farms operating at DRS. Nearly 32 per cent of the farms are operating at CRS indicating efficient utilization of resources. Log linear regression model was used to analyze the major determinants of input use efficiency in banana farms. The input variables considered under DEA model were again considered as influential factors for the CRS obtained for the three categories of farmers. Volume of water supplied ($X_1$) and fertigation cost ($X_2$) are the major determinants of banana farms across all the farmer categories and even at pooled level. In view of their positive influence on the CRS, it is essential to strengthen modern irrigation infrastructure like drip irrigation and offer more fertilizer subsidies to the farmer to enhance the crop production on cost-effective basis in Kurnool district of Andhra Pradesh, India. This study further suggests that, the present era of Information Technology will help the irrigation management in the context of generating new techniques, extension, adoption and information. It will also guide the farmers in irrigation scheduling and quantifying the irrigation water requirements in accordance with the water availability in a particular season. So, it is high time for the Government of India to pay adequate attention towards the applications of 'Information and Communication Technology (ICT) and its applications in irrigation water management' for facilitating the deployment of Decision Supports Systems (DSSs) at various levels of planning and management of water resources in the country.

• Journal of Digital Convergence
• /
• v.11 no.5
• /
• pp.119-133
• /
• 2013

This study aims to provide power generating plants with eco-efficiency information. To implement the purposes, of study, both DEA(Data, Envelopment Analysis) model and interview were incorporated in terms of methodologies. To analyze the managerial efficiency, total labor cost and number of employees were considered as input factors. CO2, NOx, and water also were considered as input factors to analyze eco-efficiency. Both annual total power product and annual total revenue were used as output factors. CRS(Constant Return to Scale) and VRS(Variable Return to) model were facilitated in this analysis. According to the findings, most of the power plants were evaluated as 'Efficient'' taking into consideration of average value, both 0.928 from CCR model and 0.969 from VRS model. 7 DMUs including DMU3 and DMU12 are efficient out of 35 DMUs relatively, other DMUs are inefficient. For results of inefficient output factors distribution, it was found that inefficiency for NOx was marked relatively higher than CO2. In order to improve the eco-efficiency in the power plants in the long term, the target amount of Co2 as well as NOx reduction needs to be properly proposed in consideration of particularity of power plants. In the long run, renewable energy, alternative fuels should be adapted to reduce the eco-inefficient.

• Journal of Auto-vehicle Safety Association
• /
• v.8 no.1
• /
• pp.31-37
• /
• 2016

The Child Occupant Safety Assessment was first introduced and carried out by Euro NCAP in 2003, with the goal of ensuring manufacturers to develop safe vehicles for passengers of all ages; the objective was to evaluate the safety and protection offered by different Child Restraint Systems (CRS) in the event of a crash. In 2013, the formerly used P child dummy series was replaced by newer and more biofidelic Q1.5 and Q3 child dummies, representing 1.5 and 3 year old children respectively. The frontal and side impact dynamic performances of the Q1.5 and Q3 were tested within all classes of vehicles assessed by Euro NCAP at the time. As an extension to that initiative, Q6 and Q10 child dummies were later developed representing children of 6 and 10 years old. Since the protection of larger children during vehicle crashes relies greatly on the interaction of vehicle restraint systems such as seat belt and the CRS, instrumented Q6 and Q10 dummies will be used to assess the protection offered in the event of front and side impact crashes. In this paper, we focused on injury criteria of Q6 and Q10 child dummies at 64 kph 40% offset frontal crash test. The whole procedure was designed with DFSS analysis. The full vehicle sled test results of both dummies were conducted with different restraint systems settled through previous sled test. It showed that several injury criteria and image data were collected as the result of the full vehicle sled test. Based on the results of these investigations, this paper describes which factor is most important and combination shows the best performance when evaluating rear seat occupant protection for Q6 and Q10 child dummies.

• The Journal of Society for e-Business Studies
• /
• v.20 no.4
• /
• pp.103-126
• /
• 2015

Compared to other countries, cloud computing in Korea is not popular especially in the government sector. One of the reasons for the current not-fully-blossomed situation is partly by early investment in huge government datacenters under Korea's e-government initiative; let alone, there was no strong control tower as well as no enforcing law and ordinances for driving such cloud computing initiative. However, in 2015 March 'Cloud Computing and Privacy Security Act' (hereinafter, Cloud Act) had been passed in the Parliament and from September 2015 Cloud Act was deployed in Korea. In U.S., FedRAMP (Federal Risk Assessment and Management Program) along with Obama Adminstration's 'Cloud First' strategy for U.S. federal institutions is the key momentum for federal cloud computing adoption. In 2015 January, U.S. Congressional Research Service (CRS) has published an extensive monitoring report for cloud computing in U.S. federal institutions. The CRS report which monitored U.S. government cloud computing implementation is indeed a good guideline for Korean government cloud computing services. For this reason, the purpose of the study is to (1) identify important aspects of the enacted Korean Cloud Act, (2) describe recent U.S. federal government cloud computing status, (3) suggest strategy and key strategy factors for facilitating cloud adoption in public organizations reflecting SDLC strategy, wherein.

• Journal of Korea Port Economic Association
• /
• v.24 no.4
• /
• pp.25-46
• /
• 2008

By using data envelopment analysis(DEA) this research measures the efficiency of Korea's five seaports and their Malmquist productivity from 1997 to 2006. Under the assumption of CRS(constant returns to scale) and VRS(various returns to scale), seaports' rankings of efficiency are measured. Busan port is confirmed as a best-performed port in the various measurements. Important finding facts are as follows. 1)Busan, lncheon and Ulsan seaports are efficient ports under the assumption of CRS and VRS. 2)Gwangyang port shows 4.3% lower efficiency level compared with efficient ports. 3)Pohang port shows 27.3% lower efficiency level compared with efficient ports. 4)Average total factor productivity of Korea's five ports has been lower at the rate of 3.1% during the period from 1997 to 2006. Main policy implications are 1)Busan port is more efficient than Gwangyang port, which reflects the difference of economic activities between two regional econmies. 2)During the period 1997-2006, Korea's five largest ports has experienced lower efficiency levels in the first half period because of the 1997 Korean Financial Crisis, but higher efficiency levels in the second half period because of economic recovery. In future research the more and better data will be expected to improve the understanding of Korean seaports' efficiency characteristics.

• Journal of Korea Port Economic Association
• /
• v.33 no.4
• /
• pp.73-82
• /
• 2017

Korea is the fifth largest producer of automobiles in the world, and this industry accounts for the highest portion of the entire manufacturing industry. It is an especially important industry occupying second place in the top 10 export items in Korea. Korea exports about 3 million units of cars produced in the country and abroad, based on new cars and excluding second hand cars. Japan, along with Korea, represents a high portion of the global automobile industry, and it exports more than 4 million cars to the rest of the world. In particular, both Korea and Japan export automobile and used cars produced within the country, almost all of them by PCC(Pure Car Carrier) or PCTC(Pure Car Truck Carrier). Therefore, automobile export ports are located near automobile factories, and are being used in export to foreign countries. However, there are inefficient problems, such as poor port facilities, yard space shortage for loading and unloading operations and lack of proficiency of cargo handling companies. As a result, there are delays in cargo operations, or ships waiting have occurred. Therefore, the purpose of this study is to measure and compare the efficiency of automobile export ports in Korea and Japan. To measure the efficiency of automobile export port, we used CRS and VRS models from DEA. The input and output parameters were set as length of quay, yard area and throughput of cars, and DMUs are 25 ports for evaluating the efficiency. As a result of the efficiency measurements, two Korean ports (Gwangyang and Ulsan) and three Japanes ports (Kanda, Omaezaki, Kanmon-Shimonoseki) showed high efficiency in both models. These results can be used to establish strategies for enhancing efficiency and competitiveness of automobile export ports in Korea and Japan.

• Journal of Environmental Impact Assessment
• /
• v.24 no.6
• /
• pp.549-560
• /
• 2015

The priorities of siting restriction was derived from quantification of environmental hazard according to industrial classification based on 'Chemical Ranking and Scoring System(CRS)' which is handling the discharge characteristics of 31 industrial classifications regulated from locating at 'Industrial Complex in Rural Area(ICRA)'. CRS that is utilizing the data of 'Pollutant Release and Transfer Registers(PRTR)' is applied to determine human health risk and ecological risk which are calculated by discharged amount and materials $LC_{50}$ according to water, soil and air media based on industrial classification. From this process, exposure assessment and toxicity assessment for integrating the adverse environmental impact and the mitigation effect of environmental risk according to the development of environmental technologies into establishing the rational landuse management method for the 31 industrial classifications regulated from locating at ICRA was analyzed. From the assessment result of the siting restriction removal at ICRA for 31 industrial classifications, based on 2012 year reference 6 industries that includes Manufacture of Guilt Coloration Surface Processing Steel Materials, Manufacture of Biological Product, Manufacture of Smelting Refining and Alloys of Copper, Dyeing and Finishing of Fibers and Yarns, Manufacture of Other Basic Iron and Steel n.e.c., Rolling Drawing and Extruding of Non-ferrous Metals n.e.c. are calculated as having relatively lower environmental hazards, thus it is judged that the siting restriction mitigation at ICRA is possible for the 6 industrial classifications that are not discharging the specific hazardous water contaminants during manufacturing process.

• Asian-Australasian Journal of Animal Sciences
• /
• v.23 no.12
• /
• pp.1601-1607
• /
• 2010

Two experiments were carried out to investigate i) the effects of four levels of lactic acid bacteria inoculants (LAB; 0, $2{\times}10^5$, $3{\times}10^5$ and $4{\times}10^5$ cfu/g fresh forage) and two physical forms of rice straw (whole and chopped rice straw) on silage fermentation quality and nutritive value of rice straw (RS) silage for lactating Holsteins and ii) the effects of the replacement of corn silage (CS) with different inclusion levels (0, 25 and 50%) of LAB treated RS on lactating performance of Holstein dairy cows. Rice straw packed with stretch film was ensiled for 45 d. The results showed that the higher level of LAB inoculants in the silage quadratically decreased pH, $NH_3$-N and acetic acid concentrations and increased the contents of lactic acid and total organic acids. The CP content and DM losses in the silage declined linearly as the level of LAB addition was increased. Compared with whole-plant rice straw silage (WRS), chopped rice straw silage (CRS) dramatically reduced pH by 0.83. The concentrations of $NH_3$-N were similar in WRS and CRS and both were less than 50 g/kg of total N. Chopping rice straw before ensiling significantly enhanced the lactic acid concentration and total organic acids content whereas the concentration of acetic acid declined. The CP, NDF and ADF content of CRS was 13.4, 5.9 and 10.2% lower than in WRS, respectively. Except for butyric acid concentration, significant interaction effects of inoculation level and physical form of RS were found on all fermentation end-products. Our findings indicated that milk yield and composition were not affected by different level of RS inclusion. However, because of the lower cost of WRS, cows consuming a ration in which WRS was partially substituted for CS had 3.48 Yuan (75% CS+25% WRS) and 4.56 Yuan (50% CS+50% WRS) more economic benefit over those fed a CS-based ration. It was concluded that the chopping process and LAB addition could improve the silage quality, and that substitution of corn silage with RS silage lowered the cost of the dairy cow ration without impairing lactation performance.