• Fire Science and Engineering
• /
• v.23 no.4
• /
• pp.32-39
• /
• 2009

In this study, 18 plots were selected for particular investigation on Gangneung area and Samcheok area and Uljin area, where forest fire was occurred after thinning in 2007. After selection, a relationship between a damage of forest fire and thinning were compared and analyzed. Many factor such as a damaged species, a thinning or non-thinning, a direction of forest fire head, DBH, a height of tree, a mortality of tree, a leeward scorching ratio, a crown damage ratio, a forest tree standing crop density, a crown base height, a leaving of thinning slash, a location of plot (GPS), elevation, an aspect of slope, an angle of slope, and a topography were measured. Therefore, we analyzed a relationship with forest fire. In the result of this analysis, it was founded that the leeward scorching ratio was 24.7% on thinning area whereas 60.2% on non-thinning area. Subsequently, leeward scorching ratio on thinning area was increased by about 35.5% more than on non-thinning area. In the result of analysis about tree species, a forest of pine tree was more damaged than forest of oak tree. The mortality of tree was increased by about 41.4% on non-thinning area. When stands were close to thinning slashes, these were more damaged by 10${\sim}$20% than other stands for increasing of amount of a combustion material. Especially, as potential of re-ignition increased for more cumulated thinning slash, it will be more important to require a method for a periodical removing or practical utilization of slash.

• Journal of the Korean Chemical Society
• /
• v.33 no.6
• /
• pp.588-595
• /
• 1989

Log K, ${\Delta}$H and ${\Delta}$S for the complexation of $La^{3+},\;Ce^{3+}$ and $Eu^{3+}$with various multidentate ligand containing crown ether, diaza crown ether and diamine ether have been determined in methanol and acetonitril solutions at $25^{\circ}C$ by solution calorimetric titration method. The greater stability constant of $La^{3+}$-15C5 than those of 18C6 diaza [2.2] in methanol are discussed in terms of the size of metal ion and the ligand cavity and of metal ion solvation. The stabilities of $Ce^{3+}$ and $La^{3+}$ ion complexes with a various multidentate ligand in acetonitril are in the order of (diamine ether)<18C6<15C5$Ce^{3+}$, $La^{3+}$ and $Eu^{3+}$-diaza [2.2] complexes in acetonitril are increased with the following order: $Eu^{3+}$ < $La^{3+}$ < $Ce^{3+}$, that is increasing order of the optimum size and of the charge density of metal ion.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.14 no.2
• /
• pp.45-52
• /
• 2012

Enrichment planting is commonly used for increasing the density of tree species in secondary forests and one of forest rehabilitation programs in Lao PDR. This study aimed to determine the performance of five native species in enrichment planting using different canopy opening treatments, and to examine the suitable species and silviculture techniques applicable to a logged-over forest in Lao PDR. Results of the study showed that only crown height had significant difference among species and planting treatments. The survival rate and crown diameter were significantly different by species, but not by planting treatments. However, root collar diameter (RCD) and height of seedlings showed significant differences among planting treatments. Among the study species, Hopea odorata and Dalbergia cochinchinensis showed significantly higher survival rate and height growth, indicating their suitability in enrichment planting for rehabilitation of forest in Lao PDR. The results also suggested that 2 m width line planting stimulated RCD growth, but wider line planting, such as gap planting, promoted height growth of seedlings.

• Journal of the Korean Society of Safety
• /
• v.38 no.4
• /
• pp.39-46
• /
• 2023

Pine trees, which account for 23% of the forested area of the Republic of Korea, are highly vulnerable to fire in comparison to broad-leaved trees due to the presence of consistent water tube sections throughout the year and resin that is composed of approximately 20% oil. In addition, the pattern of forest fires is determined by weather, topographic conditions, and fluctuation in moisture content. Therefore, when fire breaks out in pine tree forests during the dry season (January to March), it is difficult to extinguish, and it quickly spreads. In this study, the combustion characteristics of pine needles, pine cones, and pine branches in the water tube sections of living pine trees were compared and analyzed in accordance with the moisture content as per the ISO 5660-1. The monthly moisture content was analyzed from January to March, and it was found to be the lowest in March, with 53.6% for pine needles, 51.9% for pine branches, and 10.9% for pine cones. In particular, pine cones were more vulnerable to fire as compared to pine needles and pine branches because their moisture content was more than five times lower than that of pine needles and branches. The ignition time, which affects the speed of flame propagation, was the most rapid in March, and the fastest ignition time was for pine cones, at 19 seconds, followed by 34 seconds for pine needles, and 256 seconds for pine branches. The pine branches were the last to be ignited due to the effect of density, according to the thickness and specific gravity of the specimen. The peak heat release rate, which is a measurable index of fire intensity, was analyzed for pine cones and found to be 184.28 kW/m² , while the mean effective heat of combustion was 19.79 MJ/kg, and the total heat release rate was 39.7 MJ/m² , and these values were higher than those of pine branches and pine needles. Thus, we determined that the flame propagation speed and fire intensity according to the moisture content can be used to evaluate the risk of fire to the water tube section of pine trees. It is suggested that because of the combustion characteristics of the pine cone in March, that is when the forest is most vulnerable to fires.

• Journal of Korean Society of Forest Science
• /
• v.106 no.4
• /
• pp.450-456
• /
• 2017

This study was conducted to develop estimated equation for mortality rates (volume of dead trees, %) on coniferous and broad-leaved forests, representative forest types of South Korea. There were 6 equation models applied for estimating mortality such as a exponential equation, a Hamilton equation and variables using were DBH, basal area, and site index. Raw data used for estimating mortality were $5^{th}$ and $6^{th}$ national forest inventory data, and mortality was calculated with the difference of stocks between lived trees and dead trees by each sample plots. The most applicable equation to describe mortality on coniferous forest and broad-leaved forest was indicated as $P=(1+e^{(a+b{\times}DBH+c{\times}BA+d{\times}no\_ha+e{\times}density)})^{-1}$ and their goodness of fit showed 34% and 51% respectively. Goodness of fit in both equations were not much high because there were various factors which affect the mortality such as topographic conditions, soil characteristic, climatic factors, site quality, and competition. Therefore, it is considered that explaining mortality in forest with only 2 or 3 variables like DBH, basal area used in this analysis could be very difficult facts. However, this study is certainly worth in that there is no useful information on mortality by each forest type throughout the country at the present, and we would make an effort to promote the fitness of estimated equation for mortality adding competition index, tree crown density etc.

• Journal of Korean Society of Forest Science
• /
• v.104 no.3
• /
• pp.403-410
• /
• 2015

This study was conducted to analyze the forest environmental characteristics on a total of 20 forest environmental factors affecting the debris flow against 272 sites of risk areas. In the case of environmental factors, it showed the high risk of debris flow under the following conditions such as soil depth of less than 30cm, west slope, altitude of 200~300 m, mountain average slope of $25{\sim}30^{\circ}$, sandy loam, igneous rocks, and composite slope. Among the rainfall factors, 50~100 mm of maximum hourly rain fall and 300 mm of maximum rain fall per day have been shown the high risk of debris flow. Furthermore, the high risk of debris flow was related to the river-bed average slope of $10{\sim}20^{\circ}$, the river-bed average width of >10 m, the small amount of debris in river-bed (less than 20% of river-bed structure), the drainage density of >$1km/km^2$, the 40~60% of area with more than $20^{\circ}$ slope, and the 40~60% of areas with risk grade 2 of landslide. In addition, forest environmental factors including the driftwood, soil erosion control structures, age-class 3, crown density (density), and mixed forest were important factors causing the high risk of debris flow.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.14 no.4
• /
• pp.222-228
• /
• 2012

This study was conducted to determine the natural succession process after forest fire by comparing height, relative growth rates in height (RGH), and tree density of pine seedlings with different fire severity. In the area damaged by surface fire, tree density was highest during the first 5 years after fire. However, in the area damaged by crown fire, tree density rapidly increased during first 5 years after fire. Pine seedlings were found only on the place with ridges, barren soil, and the aspect of north. Annual height growth of pine seedlings was decreased with time in all study sites. The empty space in pine stands gradually decreased by the invasion of Quercus species. The forest fire altered the pine forest into oak forest rapidly. In contrast, pine seedlings invaded steadily on the oak forest in the rocky area or the area with ridges.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.20 no.4
• /
• pp.139-151
• /
• 2017

The habitat preference of roe deers(Capreolus pygargus) in Jeju island, South Korea was analyzed by using their occurrence probability in MaxEnt model in this study. Totally 490 surveying data were gathered and 15 environmental variables were chosen for the model in which 6 variables out of 15 ones were filtered and finally removed because of there being higher correlation(over 0.7 in correlation coefficient). According to the modeling, roe deers were known to prefer the area ranging from 200 to 700 meter and over 1,500 meter in sea level, where there were not many dominant tree and/or dominant vegetation with low density so that understory vegetation can grow well with plentiful sunlight and can be used as a food of herbivore like roe deers. Otherwise, the region ranging from 700 to 1,500 meter was mostly covered with high density vegetation which cut off sunlight trying to penetrate through the dominant vegetation. It can cause a lower density of vegetation on surface, which can not attract to roe deers.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.10 no.3
• /
• pp.102-106
• /
• 2008

This study was carried out to evaluate the relationships between stand attributes and litterfall amounts in a 28-year old Quercus acutissima stand. Eighteen sampling plots of $20m{\times}20m$ were chosen and litterfall was collected from May 2005 to December 2006. There was no correlation between stand attributes(tree density, mean diameter at breast height, mean height, basal area) and litterfall amounts except for flower and miscellaneous litter for the study period. There were no significant relationships between leaf litter and basal area(r=0.02, 0.05; P=0.93, 0.83) and between leaf litter and tree density(r=-0.10, 0.05; P=0.85, 0.69). Also, leaf litter was affected neither by mean diameter at breast height(r=-0.08, 0.30; P=0.73, 0.22) nor by mean height(r=-0.24, 0.09; P=0.34, 0.70). Other litter amounts such as bark, branch, and acorn showed no relationships with the stand attributes (P>0.05). The lack of significant relationships between litterfall amounts and stand attributes could be due to the closed canopy with a complete crown cover in this mature oak stand.

• Journal of Korean Society of Forest Science
• /
• v.90 no.4
• /
• pp.565-572
• /
• 2001

The spatial genetic structure of Needle fir(Abies holophylla Max.) seedlings on forest gap within a Needle fir forest at Mt. Odae in Korea was analyzed on the basis of ISSR(inter-simple sequence repeats) marker analysis. The gap size was $1,500m^2(50m{\times}30m)$, and we sampled 416 one- or two-year-old seedlings by 2m intervals. Some trees at the upper crown layer except Needle firs and all trees at the middle and lower crown layers were removed, and Needle firs at the upper crown layer showed very weak growth strength or to be withering to death. The results of spatial autocorrelation using 31 polymorphic ISSR markers revealed that it was genetically homogeneous within spatial distance of 15.6m and the randomness of genetic distribution was from 15.6m to 31.2m. The genetic patch size of seedlings in forest gap might be restricted by the density of mother trees, making allow for the average height of adult Needle firs, the seed dispersal area, and the average distance between adults. For the directionality of seedling distribution, we investigated the variography using 'genetic configuration' which was the value of configuration in Multidimensional Scaling by genetic distance. In directional variogram, the increment of spatial distance from East to West direction was inversely proportional to genetic homogeneity. We presumed that this anisotrophy of seedling distribution at this forest gap resulted from the directionality of seed dispersal rather than the difference of fecundity between mother trees or the microhabitat variation, taking the evenness of forest floor condition, a vast seed production and the random distribution of seedlings at the studied site into consideration.