• Proceedings of the KIPE Conference
• /
• 2016.11a
• /
• pp.145-146
• /
• 2016

일반적인 boost PFC 컨버터는 한 개의 스위칭 소자를 사용하고 구조가 간단하지만 높은 도통손실과 스위칭 손실 때문에 낮은 효율을 갖는다. bridgeless boost PFC 컨버터는 일반적인 boost PFC 에 비해 낮은 손실을 갖는 이점이 있다. 또한 컨버터의 동작 모드 중 CRM 방식은 낮은 스위칭 손실을 갖는 이 점이 있다. 본 논문에서는 이러한 CRM 모드로 동작하는 bridgeless boost PFC 컨버터를 해석하는 경우 기존의 방법으로 해석하여 구현하면 주파수가 커지는 영역에서 오차가 커지게 된다. 따라서 본 논문에서는 반도체 스위치의 기생 커패시터를 추가하여 해석하는 것을 제안하였다.

• Proceedings of the KIPE Conference
• /
• 2016.07a
• /
• pp.263-264
• /
• 2016

일반적으로 HID 램프용 안정기에는 디지털 제어기를 사용하지 않지만 디지털 제어로 구현하는 경우 여러 가지 이점이 있다. 따라서 본 논문에서는 DSP를 기반으로 Bridgeless CRM PFC Converter 제어를 디지털로 구현 할 것을 제안하였다. 이때 인덕터 전류 검출을 하지 않기 위하여 DSP 연산에 의해 계산된 온, 오프 시간으로 동작하도록 하였으며, 과도상태 시 출력 전압에 따른 주파수 제한 방법을 통해 안정적인 구동이 가능하도록 하였다. 제안한 방식은 시뮬레이션을 통해 검증하였다.

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.4
• /
• pp.14-19
• /
• 2010

In this paper, using interleaved power factor correction how to improve the inverter efficiency studied. Interleaved method can reduce the conduction losses and the inductor energy. Generally, critical conduction mode (CRM) boost PFC converter used low power level because of the high peak currents. if you use the interleaved mode, CRM PFC can be used medium or high power application. interleaved CRM PFC can reduce current ripple for higher system reliability and size of buck capacitor and EMI filter size. Interleaved CRM PFC that is installed in front of inverter can maintain the constant voltage regardless of the input voltage.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.12
• /
• pp.2000-2007
• /
• 2016

Generally, in order to implement the CRM(Critical Conduction Mode), the analog controller is used rather than a digital controller because the control is simple and uses less power. However, according to the semiconductor technology development and various user needs, digital control system based on a DSP is on the rise. Therefore, in this paper, the CRM bridgeless PFC converter based on a digital control is proposed. It is necessary to detect the inductor current when it reaches zero and peak value, for calculating the on time and off time by using the current information. However, in this paper, the on-time and off-time are calculated by using the proposed algorithm without any current information. If the switching-times are calculated through the steady-state analysis of the converter, they do not reflect transient status such as starting-up. Therefore, the calculated frequency is out of range, and the transient current is generated. In order to solve these problems, limitation method of the on-time and off-time is used, and the limitation values are varied according to the voltage reference. In addition, in steady state, depending on the switching frequency, the inductance is varied because of the resonance between the inductor and the parasitic capacitance of the switching elements. In order to solve the problem, inductance are measured depending on the switching frequency. The measured inductance are used to calculate the switching time for preventing the transient current. Simulation and experimental results are presented to verify the proposed method.

• Proceedings of the KIPE Conference
• /
• 2017.07a
• /
• pp.170-171
• /
• 2017

본 논문은 브릿지리스 부스트 PFC 컨버터를 사용한 저용량 단상 단방향 인버터 시스템에 관한 연구이다. 단상 PFC 인버터 시스템의 고효율화를 위해 브릿지리스 부스트 컨버터를 사용하였고 브릿지리스 부스트 컨버터의 CRM 모드로 동작하는 제어기를 제안하였다. 제안된 제어기를 브릿지리스 부스트 PFC 인버터 시스템에 적용하여 시뮬레이션으로 검증하였다.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.6
• /
• pp.2310-2318
• /
• 2018

Critical conduction mode (CRM) operation is more efficient than continuous conduction mode (CCM) operation at low power levels because of the valley switching of switches and elimination of the reverse recovery losses of boost diodes. When using a sensorless digital control method, an error occurs between the actual and the estimated current. Because of the error, it operates as CCM or discontinuous conduction mode (DCM) during CRM operation and also has an adverse effect on THD of input current. In this paper, a current sensorless technique is presented in an inverter system using a bridgeless boosted power factor correction converter, and a compensation method is proposed to reduce CRM calculation error. The validity of the proposed method is verified by simulation and experiment.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.22 no.1
• /
• pp.27-35
• /
• 2017

In this study, an integrated 2-in-1 transformer for a low-weight and low-cost light-emitting diode lighting power supply is proposed. In the transformer, a power factor correction (PFC) inductor and an LLC resonant transformer are placed and integrated on a single magnetic core. The amount of mutual interference, represented by the coupling coefficient, between magnetic fluxes generated from each magnetic source is minimized by using the new shape core of an integrated 2-in-1 transformer. The design consideration on critical conduction mode PFC converter and LLC resonant converter using the proposed 2-in-1 integrated transformer is described, and the overall performance of the 150 W LED PSU shown through the experiment.

• Proceedings of the KIPE Conference
• /
• 2018.07a
• /
• pp.207-209
• /
• 2018

본 논문은 고효율 및 고전력밀도 3-레벨 PFC(Power Factor Correction) 컨버터를 제안한다. 기존 PFC의 고 전력밀도를 위한 스위칭 주파수 상승은 스위칭 특성이 우수한 소자를 적용하거나, 별도의 스너버 회로가 요구되므로 설계가 복잡하며 고전력밀도 달성에 한계가 있다. 제안 PFC 컨버터는 3-레벨 방식을 적용하여 각 스위칭 소자의 전압 스트레스를 절반으로 감소시켰으며, 스위치 손실 저감을 통한 고속 스위칭 동작으로 리액티브 소자의 고밀도화를 달성하였다. 또한, 기존의 3-레벨방식은 디지털 제어를 통해 스위칭 소자의 전압 평형이 이루어졌지만, 본 논문에서는 아날로그 IC에 전압 평형을 위한 RC Delay 회로와 소수의 SMD(Surface-mount devices) 소자만을 이용하여 별도의 제어회로 없이 전압 평형이 가능하므로 고 전력밀도 달성에 유리하다. 제안회로의 타당성을 검증하기 위해 CRM(Critical conduction mode) PFC 컨버터를 기반으로 250W급 시작품 제작을 통한 실험 결과를 제시한다.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.20 no.5
• /
• pp.437-447
• /
• 2015

In this paper, implementation of an integrated transformer applicable to power supply units (PSUs) for a 150-W LED with a wide range of output voltage is presented. The transformer is comprised of a PFC inductor and an LLC resonant transformer, each of which is placed and integrated on an E-I-E-type magnetic core. Integrated transformers with two different air gap topologies (i.e., the side and center gap topologies) are considered in the design phase to investigate their applicability. The design consideration on the LLC resonant converter used for the wide-output-voltage control ranges is described, and the overall performance of the proposed system is verified through realization of it onto a 150-W LED PSU board.