• Proceedings of the KOSOMBE Conference
• /
• v.1998 no.11
• /
• pp.291-292
• /
• 1998

The purpose of the study was aimed to evaluate the BOLD contrast fMRI in occipital lobe and compare this imaging with metabolite changes based on $^1H$ MRS and MRSI before and after visual stimulation. As a result, the activation map were sucessfully produced by thresholding with minimum cross-correlate value of 0.45. In MRS, NAA/Cr ratio is almost same. however, latate was elevated almost 9 times higher than before activation. Lactate metabolic images were consistent with the BOLD effect map. The BOLD contrast fMRI is not enough to detect the activation area in human brain. so, the other modality was required such as lactate metabolic map.

• Journal of the Korean earth science society
• /
• v.39 no.3
• /
• pp.260-274
• /
• 2018

The purpose of this study was to propose curriculum and teaching sequence for seasonal change by exploring a learning progression. For the purpose, 4 steps of construct modeling approach (specifying construct, item design, outcome space, and measurement model) proposed by Wilson (2005) was applied. In the stage of specifying construct, 'length of shadow according to seasons', 'position of constellation according to seasons', 'seasons of the southern hemisphere and northern hemisphere', 'cause and phenomenon of seasonal change' were selected as the subconstructs of seasonal changes, and constructed a construct map showing the level of development from level 1 to level 4 for each subconstruct based on the results of the previous research. In the item design stage, we developed five assessment items consisting of 3 items in the form of C-E (choose and explain) and two items in the form of CR (constructed response), applied it to 383 elementary, middle and high school students. In the outcome space stage, the students' responses to the assessment items were categorized based on the construct map. The categories were classified into 4 levels according to student ability and scores of 1-4 were given. In the measurement model stage, we applied the partial credit model of the Rasch model and compared whether the learning pathway created from the results of students' response coincides with the construct map. Based on the results of the research, we modified the construct map and finally created hypothetical learning progression on seasonal change. Finally, we proposed an orientation of curriculum amendment and effective teaching sequence for seasonal change.

• Journal of KIISE:Databases
• /
• v.28 no.3
• /
• pp.512-527
• /
• 2001

In a client-server spatial database, it is desirable to maintain the cached data in a client side to minimize the communication overhead across a network. This paper deals with the issues of concurrency and consistency of map updates in this environment. A client transaction to update map data is an interactive work and takes a long time to complete it. The map update in a client site may affect the other sites'updates because of dependencies between spatial data stored at different sites. The concurrent updates should be propagated to the other clients as well as the server to keep the consistency of map replicated in a client cache, and also the communication overhead of the update propagation should be minimized not to lose the benefit of caching. The newly proposed cache region locking with CR lock and CX lock controls the update dependency due to spatial relationships. CS lock and COD lock are suggested to use optimistic detection-based approaches for guaranteeing the consistency of cached client data. The cooperative update protocol uses these extended locking primitives and Spatial Relationship-based 2PC (SR-based 2PC). This paper argues that the concurrent updates of cached client spatial data can be achieved by deciding on collaborative updates or independent updates based on spatial relationships.

• Journal of the Korean Society of Safety
• /
• v.35 no.5
• /
• pp.59-65
• /
• 2020

For monitoring the status of industrial accidents, many statistical indexes have been developed and applied such as fatal rate, frequency rate, and severity rate. These accident indexes are measured by frequency and loss time according to the accidents in the individual industry level. However, it is less considered to use the index of identifying the industrial concentration of accidents in the holistic view. Thus, this study aims to suggest the accident concentration level among domestic industries through index analysis. The concentration level of industrial accidents is calculated by the accident composition of sub-industries. This concentration level shows whether an industry is comprised of a few sub-industries generating more accidents or an industry consists of sub-industries having the similar number of accidents. To this end, the concentration rate (CR) and concentration index (CI) are proposed to take a look at the industry composition of accidents by embracing the concept of market concentration indexes such as Hirschman-Herfindahl Index. As for the case study, four industries of mining, manufacturing, transportation, and other business (usually service) are analyzed in terms of indexes of accident rate, death(fatality) rate, and CR and CI of accident and death. Finally, we illustrate the positioning map that the accident concentration level is compared with the traditional accident frequency level among industries.

• Journal of the Korean Society of Costume
• /
• v.60 no.6
• /
• pp.101-116
• /
• 2010

The purpose of this thesis is in investigating the Korean twenties face color, according to the seasons, thus presenting a sample Korean Facial Color Map. The face is divided into 20 parts to take measures, and investigated through the four seasons. Minolta Chrome Meter CR-200 has been used for taking measures of the face color. Measuring subjects and area are, University students of both sex, living in the Suncheon. They are of ages the twenties. Classified measuring values of the skin colors are expressed following to the A. H. Munsell's color system. The result of this study is as followed. When comparing parts among male and female(make-up and no make-up) groups for changes with seasonal hue and value of a face color, differences have been sighted among these three groups following the seasons ; Spring(March), Summer(June), Autumn (September) and Winter(December). According to the result of Duncan's proof, the differences of the women group with the make-up attitude was shown only in value from Summer and Autumn, but no differences have been sighted between the make-up group and the no make-up group, concerning hue. Concerning hue, it was shown that men had a redder hue than women in all seasons. In Spring, both men and women had the strongest red hue, then from Summer to Autumn a strong yellowish hue appeared, to make place to a diverse coloring in Winter, followed by a reddish hue, to start all over again. Value number proved to be lower in the Summer and Autumn for the no make-up group when compared to the make-up group, showing an averaging high number for all seasons when putting on make-up; and men value number shows the lowest of the three groups.

• Journal of Power System Engineering
• /
• v.21 no.2
• /
• pp.20-26
• /
• 2017

This study was carried out to investigate the effect of precipitate on the high temperature deformation stability of incoloy 825 alloy. $Cr_{23}C_6$ carbide was precipitated under $950^{\circ}C$, but was not detected over $1,000^{\circ}C$. Most of the precipitation consist of $Cr_{23}C_6$ carbide. Strain-rate sensitivity was the highest in 0.01/s and the lowest in 10/s. Strain-rate sensitivity was decreased sharply below $950^{\circ}C$. In the temperature between $850^{\circ}C{\sim}1,150^{\circ}C$, plastic instable area did not exist. It showed the lowest Ziegler Parameter value of 0.06 Ziegler Parameter was the lowest as 0.06 at $850^{\circ}C$ with 10s-1 of strain. The highest Ziegler Parameter value(0.43) was found in plastic deformation at $1,050^{\circ}C$ with 0.01s-1 of strain. It tends to have an higher resistance to the high temperature deformation under $950^{\circ}C$, due to the precipitation.

• Economic and Environmental Geology
• /
• v.35 no.2
• /
• pp.137-147
• /
• 2002

Natural geological and environmental processes reflect to element abundances in geological materials on the surface. This study aims to elucidate a possibility of geostatistical application to differentiate geochemical anomalies affected by anthropogenic and geogenic factors. A regional geochemical map was produced using 'inverse distance weight interpolation' method for analytical results of stream sediments «150 11m) which were collected from 2,290 first- to second-order streams over the whole Gyeonggi Province. The Jurassic granitic batholith in the southeastern province was selected as a target for the geostatistical examination. Factor analysis was conducted using 22 elements for stream sediments from 445 drainage basins over the granitic body. Co, Cr, Sc, MgO, Fe$_{2}$O$_{3}$, V, and Ni were grouped with high correlation coefficients and the depletion of the components may reflect the whole-rock chemistry of the granite. Regression analysis was done using Co, Cr, and Sc as dependent variables and other six components as independent variables, and the results were drawn as maps. The maps acquired generally show quite similar distribution patterns with those of concentrations of each variable. The similarity in the spatial patterns between the two maps indicates that the application of regression statistics can be valid for the interpretation of regional geochemical data. However, some components show local discrepancies which may be influenced by secondary factors regardless of the basement lithology. The regression analysis may be effective in extracting local geochemical anomalies which may reflect rather anthropogenic pollutions than geogenic influences.

• Proceedings of the Korean Information Science Society Conference
• /
• 2006.06b
• /
• pp.370-372
• /
• 2006

본 논문에서 제안하는 방법은 영상에서 중심 객체를 추출하기 위해 에지와 색상 정보에서 추출한 특집 지도와 배경의 영향을 줄이기 위친 창조 지도(reference map)를 제안한 것이 특징이다. 특징 지도는 다른 영역과 현저하게 구분되는 영역을 검출하기 위해서 영상의 특징 값(feature)들을 이용해서 구성한 영상이라고 할 수 있다. 그리고 창조 지도는 배경의 영향을 최소화하면서, 객체가 존재할 확률이 높은 부분을 나타내는 지도이다. 제안하는 방법은 밝기 차 정보를 가지고 있는 에지와 YCbCr 컬러모델과 HSV 컬러모델의 색상 성분을 특징 값으로 사용한다. 이들 특징 값을 이용해서 특징 지도를 구성하는 방법으로 영상 내 색상 차에 의해서 나타나는 경계부분을 구하는 방법을 사용한다. 이 방법을 사용하여 에지 지도와 두 개의 색상 지도의 3가지 특징 지도를 생성한다. 다음으로, 영상 배경의 영향을 줄이기 위해 참조 지도를 구한다. 구해진 참조 지도와 특징 지도들을 이용해서 결합 지도(combination map)를 생성한다. 결함 지도로부터 다각형의 객체 후보 영역을 구하고, 객체 후보 영역에 영상분할을 적용하여 중심 객체를 추출한다. 실험에 사용된 영상들은 Corel DB를 사용하였으며, 실험결과로써 precision은 84.3%, recall은 81.3%의 성능을 보인다.

• Spatial Information Research
• /
• v.14 no.1 s.36
• /
• pp.129-150
• /
• 2006

Mineral potential mapping is an important procedure in mineral resource assessment. The purpose of this study is to analyze mineral potential using weight of evidence model and a Geographic Information System (GIS) environment to identify areas that have not been subjected to the same degree of exploration. For this, a variety of spatial geological data were compiled, evaluated and integrated to produce a map of potential mineral in the Gangreung area, Korea. for this, a spatial database considering mineral deposit, topographic, geologic, geophysical and geochemical data was constructed for the study area using a GIS. The used mineral deposits were non-metallic(Kaolin, Porcelainstone, Silicastone, Mica, Nephrite, Limestone and Pyrophyllite) deposits of sedimentary type. The factors relating to mineral deposits were the geological data such as lithology and fault structure, geochemical data, including the abundance of Al, As, Ba, Ca, Cd, Co, Cr, Cu, Fe, K, Li, Mg, Mn, Mo, Na, Ni, Pb, Si, Sr, V, Zn, $Cl^-,\;F^-,\;{PO_4}^{3-},\;{NO_2}^-,\;{NO_3}^-,\;SO_{42-}$, Eh, PH and conductivity and geophysical data, including the Bouguer and magnetic anomalies. These factors were used with weight of evidence model to analyze mineral potential. Probability models using the weight of evidence were applied to extract the relationship between mineral deposits and related factors, and the ratio were calculated. Then the potential indices were calculated by summation of the likelihood ratio and mineral potential maps were constructed from Geographic Information System (GIS). The mineral potential maps were then verified by comparison with the known mineral deposit areas. The result showed the 85.66% in prediction accuracy.

• Economic and Environmental Geology
• /
• v.30 no.2
• /
• pp.89-103
• /
• 1997

The purpose of this research is to investigate the enrichment and distribution patterns of naturally occurring potentially toxic elements in soils derived from black shales and slates. Soil samples were collected from the Chubu area covered with uranium-enriched black shales and slates of the Changri Formation of the Okchon Super Group, and analysed for multiple-elements using INAA, ICP-AES and AAS. Soil pH and loss-an-ignition were also measured. Trace element contents in black shale and slate of the Chubu area are relatively lower than those in black shales, and higher than those in black slates reported elsewhere (Chon, Jung, 1991; Chon et al., 1996). Soil pH values range from 3.5 to 6.5, and loss-an-ignition values are in the range from 3 to 10%. Potentially toxic elements including As, Ba, Cr, Cu, Mo and U are highly enriched in residual soils with maximum content of $540{\mu}g/g$, $35,000{\mu}g/g$, $280{\mu}g/g$, $300{\mu}g/g$, $240{\mu}g/g$ and $860{\mu}g/g$, respectively. Significant concentrations of those elements were found in soils taken from the Tojangkol, the Chubu tunnel and the Meokti areas. Soils derived from black shales and slates, calcareous and phyllitic rocks, and intrusions were discriminated in terms of As, Ba, Co, Cr, Cu, Mo, Sc and U contents. Enrichment index was calculated using the concentrations of As, Ba, Cr and Mo, and enrichment index map shows very similar trend with U distribution in soils.