• Analytical Science and Technology
• /
• v.20 no.3
• /
• pp.246-250
• /
• 2007

The quantitative determination of chromium(VI) by separation from chromium(III) complex of 8-hydroxyquinoline using solvent extraction has been studied. The reaction conditions for chromium(III) complex of 8-hydroxyquinoline and the solvent extraction of complex were investigated in detail. The chromium(III) complex was extracted with organic solvent (n-hexane) and residual chromium(VI) was determined by ICP-AES in aqueous layer. This technique is quantitative in the pH range of 8-9 and the limitations such as interfering ions were discussed.

• Korean Chemical Engineering Research
• /
• v.46 no.6
• /
• pp.1135-1141
• /
• 2008

The $La_{1-x}(Ca\;or\;Sr)xCrO_3$(x=0 and 0.25) interconnect materials for high temperature electrolysis of steam were investigated in views of sinterability and electrical conductivity. $LaCrO_3$, $La_{0.75}Ca_{0.25}CrO_3$ (LCC), and $La_{0.75}Sr_{0.25}CrO_3$ (LSC) powders were synthesized by coprecipitation method. Crystal structure was confirmed by X-ray diffraction (XRD). The sintering characteristics were analyzed by relative density and scanning electron microscopy. The electrical conductivity was measured by a DC four probe method. From the analyses of relative densities, it was found that the doped $LaCrO_3$ showed better sinterability than $LaCrO_3$ and the those sinterability increased with decrease of those particle sizes. The XRD results at different sintering temperatures for LCC and LSC revealed that the sinterability is closely related to the second phase transformation, that is, the second phase melting above $1,300^{\circ}C$ for LCC and $1,400^{\circ}C$ for LSC significantly promotes the sinterability. In case of electrical conductivities of LCC and LSC, which had a similar relative density, LCC showed better electrical conductivity than LSC.

• Journal of radiological science and technology
• /
• v.33 no.2
• /
• pp.97-107
• /
• 2010

The objectives of this study is to figure out the unknown image processing methods of commercial CR system. We have implemented the processing curve of each Look up table(LUT) in REGIUS 150 CR system by using virtual digital test pattern method. The characteristic of Dry Imager was measured also. First of all, we have generated the virtual digital test pattern file with binary file editor. This file was used as an input data of CR system (REGIUS 150 CR system, KONICA MINOLTA). The DICOM files which were automatically generated output files by the CR system, were used to figure out the processing curves of each LUT modes (THX, ST, STM, LUM, BONE, LIN). The gradation curves of Dry Imager were also measured to figure out the characteristics of hard copy image. According to the results of each parameters, we identified the characteristics of image processing parameter in CR system. The processing curves which were measured by this proposed method showed the characteristics of CR system. And we found the linearity of Dry Imager in the middle area of processing curves. With these results, we found that the relationships between the curves and each parameters. The G value is related to the slope and the S value is related to the shift in x-axis of processing curves. In conclusion, the image processing method of the each commercial CR systems are different, and they are concealed. This proposed method which uses virtual digital test pattern can measure the characteristics of parameters for the image processing patterns in the CR system. We expect that the proposed method is useful to analogize the image processing means not only for this CR system, but also for the other commercial CR systems.

• Journal of Welding and Joining
• /
• v.20 no.4
• /
• pp.551-556
• /
• 2002

Solid particle erosion wear characteristics of high Cr white iron hardfacing were investigated using the erosion wear test method according with the ASTM G76-95. Wear experiments, where the blast angle, blast distance and blast pressure were selected as test variables, were planned and analyzed by response surface method (RSM to evaluate the wear loss statistically and quantitatively. The measured wear losses well coincided with the calculated ones by the experimental equation. The wear loss of high Cr cast iron hardfacing was increased with blasting pressure, but affected in a complicated way by the blasting angle and distance. Erosion wear of high Cr cast iron hardfacing could be well predicted by RSM analysis of wear variables.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2007.04a
• /
• pp.38-39
• /
• 2007

Chromium nitrids(Cr-N)박막은 경질박막재료이며 특히 PVD법을 제조한 CrN 박막은 다른 이원계 박막에 비해 높은 내마모성을 갖는다고 알려져 있다. 본 실험에서는 CrN박막에 Zr을 첨가하여 3원계의 CrZrN 박막을 합성하여 박막의 Zr 함량에 따른 표면경도 및 조도를 측정하고 Ball-on-disk type의 마모실험과 습도제어 하에서의 마모실험을 실시하였다. 박막의 Zr 함량이 증가함에 따라 박막의 표면경도가 증가하고 표면조도는 낮아지는 것을 알수 있었고, 그에 따라 마찰계수 값 또한 낮게 측정되었다. 습도제어하에서는 마찰계수 값은 비슷한 경향을 보였으나 습도가 매우 낮은 건조한 환경에서는 박막의 마찰계수 값이 높게 나타나는 경향을 보였다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2007.04a
• /
• pp.65-66
• /
• 2007

비대칭 마그네트론을 이용하여 사원계 CrTiAlN 나노 복합 박막을 합성하였고 합성된 박막의 특성을 분석하였다. CrTiAlN 나노복합 박막의 미세구조는 CrN (111)과 CrN (200)방향으로 성장하였고 기계적 특성은 $30\;{\sim}\;39\;GPa$의 경도 값을 얻었다. 질소 분압이 0.33 Pa에서 가장 높은 경도 값을 얻을 수 있었다.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.21 no.6
• /
• pp.235-239
• /
• 2011

TiCrN layers (Ti : Cr = 20 : 80 and 5 : 95 wt%) were deposited on Inconel 617 and the effect of TiCrN coating on the high temperature stability of Inconel 617 up to $1000^{\circ}C$ was examined. XRD analysis and microstructural observation showed that vigorous and inhomogenous Cr diffusion to the surface was suppressed by TiCrN layer compare to the uncoated Inconel 617. This led to a distinctive enhancement in thermal oxidation resistance of Inconel 617.

• Investigative Magnetic Resonance Imaging
• /
• v.8 no.2
• /
• pp.86-93
• /
• 2004

Purpose: We evaluated $^1H$ MR spectroscopy improves the preoperative diagnosis of diffuse infiltrative type of primary central nervous system lymphomas. Materials and methods: After review of conventional MR images and medical records, we retrospectively reviewed proton MR spectra in seven patients with primary central nervous system lymphoma diagnosed by means of biopsy. Relative ratio of choline (Cho), N-acetylaspartate (NAA), and lipid-lactate (Lip-Lac) to creatine (Cr) were measured for quantitative analysis. Results: The average ratio of Cho/Cr was $1.80{\pm}0.95$, NAA/Cr was $1.34{\pm}0.41$, and Lip-Lac/Cr was $1.12{\pm}0.16$. All cases of lymphomas showed increased Lip-Lac peak. Two case of mass forming lymphoma showed decreased NAA/Cr significantly, whereas five cases of lymphoma without mass formation showed preserved NAA/Cr. Conclusion : We thought the presence of Lip-Lac peak without significant reduction of NAA on the MR spectroscopy was helpful for diagnosis of diffuse infiltrative type of central nervous system lymphoma.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.136.2-136.2
• /
• 2010

고전도성 세라믹 연결재용 $La_{0.8}Sr_{0.2}Cr_{1-x}Ti_xO_3$ (X=0.1 and 0.2) 연결재 재료의 소결도와 전기전도도에 대해서 연구하였다. 이러한 목적으로 $LaCrO_3$, $La_{0.8}Sr_{0.2}Cr_{0.8}Ti_{0.2}O_3$ (LSCT82), $La_{0.8}Sr_{0.2}Cr_{0.9}Ti_{0.1}O_3$ (LSCT91) 분말들을 공침법을 통해 합성하였으며, 결정구조는 X-ray Diffraction(XRD)를 통해 확인하였다. 소결 특성은 주사 전자현미경을 통해 분석하였고 전기 전도도는 직렬 4-단자 법으로 측정하였다. 상대 밀도 분석으로부터 도핑된 $LaCrO_3$는 $LaCrO_3$보다 더 높은 소결성을 나타내었고, 입자 크기가 작을수록 소결성이 향상하는 것을 확인 할 수 있었다. 다양한 소결온도에서 얻은 LSC, LSTC 시편들의 XRD 결과는 LSC와 LSTC의 소결성이 2차상의 상전이와 밀접한 관련이 있다는 사실을 나타내었다. 다시 말해, LSTC는 $1300^{\circ}$이상 LSC는 $1400^{\circ}C$ 이상에서 2차상이 융해됨으로써 소결성을 현저하게 향상시킨다는 것을 알 수 있었다. 그리고 비슷한 상대밀도를 가진 LSC와 LSTC의 전기 전도도를 비교 측정한 결과, LSTC가 LSC보다 더 높은 전기 전도도를 나타낸다는 것을 알 수 있었다.

• Journal of the Korean Chemical Society
• /
• v.37 no.10
• /
• pp.861-866
• /
• 1993

In general, the concentration of constituents can be more accurately measured in x-ray fluorescence analysis of Fe-Ni-Cr alloy by reducing and correcting the matrix effect with standard ingot samples. Because of the difficult the treatment at a high temperature in preparing the ingot samples of various concentrations, several standard specimens were prepared by mixing the powders of the metallic oxides in certain proportions and pressing them with a costant pressure. With the metallic oxide specimens thus obtained, different matrix coefficients were calculate from the intensities of the strength of the x-ray fluorescence and the concentration of the substances. It is found that effects of Fe and Cr on Ni are absorption rich and effects of Fe and Ni on Cr are enhancement rich, whereas Ni enhances Fe Fluorescence but Cr absorves Fe K${\alpha}$ line. And the x-ray fluorescence intensities were compared and analyzed between the metallic oxides and the ingot samples.