• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.59 no.3
• /
• pp.293-297
• /
• 2010

Next generation concentrating photovoltaic technologies could have a large-scale impact on world electricity production once they will become economically attractive and grid parity will be reached. Multi-junction solar cells will be characterised by a high value of the cell economical performance index if the cells were able to operate at high concentration level. Concentrating the sunlight by optical devices like lenses or mirrors reduces the area of expensive solar cells or modules, and, moreover, increases their efficiency. Accurate and reliable tracking is an important issue to maintain high the CPV system output power. Further, for high concentration CPV systems, the actual tracker cost is about 20% of the total CPV system cost. In this paper high-concentration is defined as systems using concentration ratios well above 100 times the one sun intensity and trackerlss CPV system studied. Using sphericalness lens and parallel MJ cell connection method were suggested and achieved experiment on a clear day in summer. Development of these high performance multi-junction CPV module promises to accelerate growth in photovoltaic power generation.

• Korean Journal of Veterinary Research
• /
• v.64 no.1
• /
• pp.3.1-3.8
• /
• 2024

Canine distemper virus (CDV), canine adenovirus type 2 (CAV-2), canine parvovirus (CPV), and canine parainfluenza virus 5 (CPIV-5) are the major viral pathogens in dogs. Despite the availability of vaccines for dogs against these 4 viral pathogens, investigations of antibodies against these pathogens have rarely been reported in South Korea. In this study, we investigated the recent incidence of viral diseases in dogs and conducted sero-surveillance for CDV, CAV-2, CPV, and CPIV-5 in Korean dogs. The most frequently diagnosed canine viral disease in Korean dog samples from 2000 to 2022 was CPV infection, which accounted for 48.7% (464/953) of the cases. A total of 400 dog serum samples collected between 2019 and 2022 were screened for the presence of virus-neutralizing antibodies against CDV, CAV-2, CPV, and CPIV-5. The overall seropositivity rates for CDV, CAV-2, CPV, and CPIV-5 were 83.8%, 77.8%, 99.3%, and 82.0%, respectively. The protection rate against CPV was the highest (98.3%) and that against CAV-2 was the lowest (44.8%) in dog sera. Male and female dogs showed no significant differences in seropositivity rates. CDV and CPIV-5 seropositivity increased with age in dogs, and the highest incidence and seropositivity rates of CPV indicated that Korean dogs have been continuously exposed to wild CPV, and that CPV is a pathogen that urgently requires attention among canine viral diseases.

• Journal of Veterinary Clinics
• /
• v.23 no.3
• /
• pp.308-313
• /
• 2006

This study was performed to monitor the level of serum canine parvovirus(CPV) antibody titers in adult dogs throughout the Korea from January 2003 to April 2004. A total of clinically healthy 885 dogs between 1 year and 17 years old were included in this study. Serum antibody titers against CPV were measured by means of hemagglutination inhibition(HI) titers at the time dogs were brought to the hospital for revaccination. Most of dogs had been primarily vaccinated or previously revaccinated. Dogs were grouped by age, breed, sex, and primary vaccination and revaccination to determine whether these factors were associated with antibody titers. Serum CPV titers ${\geq}80$ were considered protective. Protective antibodies against CPV were present in 95.0% of the population. Breed, age, and primary vaccination and revaccination were not significantly associated with serum CPV antibody titers. But sex was significantly associated with CPV antibody titers. The results of this study have shown that there is a need to reconsider the annual revaccination strategy against CPV infection.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.61 no.2
• /
• pp.97-102
• /
• 2012

CPV system in the desert areas or areas near the equator, as is suitable for high-temperature region. As compared to silicon solar cells, CPV system have a high proportion of a BOS (balance of system). Solar cells because of its low proportion when designing a module technology is applied in a variety of ways. Applied to the CPV system is classified into two kinds of optical technology. One of those using fresnel lens uses refraction of light energy. The other is a mirror reflection of the structure using sprays. Both of these two ways to condense the sun to collect solar cell is a form of light. And goals by using a small solar cell materials is to produce more energy. In this paper, suitable for a domestic environment, with the aim CPV Manufacturing Technology, built on a variety of modular process technology to the development of a prototype performance analysis was carried out. In particular, silicone coated on the glass by the method of implementation of the Fresnel lens SOG(Silicon on glass) by applying the lens to absorb the solar spectrum was broad. In addition to, for the analyze to characteristics of the CPV module, developed CPV module performance and generating characteristics studied. These related technology through research and development of high-performance multi-junction solar cells, modules, development of concentrating solar power systems to facilitate the growth of the market is considered to be.

• 한국태양에너지학회:학술대회논문집
• /
• 2012.03a
• /
• pp.96-101
• /
• 2012

An experimental study was conducted to investigate the performance of a concentrating photovoltaic cell (CPV) against temperature. It is know that a high efficiency of a CPV can be achieved only with proper cell temperature as well as high concentration ratio (CR). This study is concerned with appropriate cooling condition for a liquid-convection cooler for the best performance of a specific CPV. A series of experiments was conducted in a range of cell temperatures as a result of varying cooling conditions, while the concentration ratio was 390 and the solar irradiation flux was higher than 900 $W/m^2$ in outdoor environment. The CPV had a planar dimension of 10 by 10 mm. A Fresnel lens was used as a concentrator, of which the dimension was 221 mm(W) ${\times}$ 221 mm(L) ${\times}$ 3 mm(t) and the transmissivity was known to be 0.8. The cooler was attached to the bottom side of the CPV and had a contact area of 21 mm(W) ${\times}$ 26 mm(L), which was identical to the size of the base plate of the CPV. The coolant temperature was controlled by an isothermal bath and the flow rate was controlled and measured by a flowmeter. The experimental results showed that the average of power efficiency of the CPV decreased from 28.6 % to 24.7 % as the cell temperature increased from $36^{\circ}C$ to $97^{\circ}C$. An appropriate cooling method of a CPV might increase the power conversion efficiency by about 4% for the same concentration ratio. Discussion is included from the viewpoint of the combined efficiency in addition to the power efficiency.

• Journal of the Korean Solar Energy Society
• /
• v.40 no.5
• /
• pp.23-34
• /
• 2020

Concentrator photovoltaic (CPV) system consists of high-quality complex optical elements, mechanical devices, and electronics components and can have the advantages of high integration and high-efficiency energy sources. III-V compound semiconductor cells have proven performance based on high reliability in the aerospace field, but have characteristics that require absolute support of the balance of systems (BOS) such as solar position trackers, receivers with heat sinks, and housing instruments. To determine the optimum parameters of secondary optical elements (SOEs) design for CPV systems, we designed three types of CPV modules, classified as non-SOEs type, reflective mirror type, and CPC lens type. We measured the I-V and P-V characteristics of the prototype CPV modules with the angle of inclination varying from 0° to 12° and with a 500-magnification Fresnel lens. The experimental results assumed misalignment of the solar position tracker or module design of pinpoint accuracy. As a result, at the 0° tilt angle, the CPC lens produced lower power due to the quartz transmittance ratio compared to that by other SOEs. However, for tilt angles greater than 3°, the CPC lens type module achieved high efficiency and stability. This study is expected to help design high-performance CPV systems.

• Journal of Veterinary Clinics
• /
• v.25 no.6
• /
• pp.435-439
• /
• 2008

We evaluated the patterns of serology and fecal viral shedding for any differences by hemagglutination inhibition (HI) and real-time PCR on Korean CPV-2 isolates (CPV-2a-I, CPV-2a-V and CPV-2b). We successfully detected fecal viral shedding from samples extracted 2-3 d.p.i., regardless of the onset of clinical signs. In addition, the pattern of viral shedding differed depending on the CPV-2 isolates used for inoculation. We also observed differences in the serological pattern that was also depended on the CPV-2 isolates inoculated. The onset and amount of fecal viral shedding were not correlated with the level of antibody titers in this study. Our study is a valuable resource for understanding the different pathobiology of the CPV-2 isolates and the correlation between the patterns of serum antibody titer and fecal viral shedding.

• Proceedings of the KIPE Conference
• /
• 2012.07a
• /
• pp.605-606
• /
• 2012

The cost of a PV(Photovoltaic) installation are driving the market and the need for subsidized schemes, such as feed-in tariffs. Concentrated photovoltaic(CPV) is leading the development of future low cost renewable energy sources. CPV is offering high efficiency systems. This paper proposes technology and market for CPV.

• 한국태양에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.27-33
• /
• 2011

HCPV(High Concentrated PV) systems have well known for CPV market all over the world. Low concentration type silicon based modules have been introduced in the market. But low cost of standard flat silicon modules made them useless nowadays. High cost of compound semiconductor solar cell reduced cost effective cpv module production than that of recently silicon solar cell. In order to overcome increasing cost of CPV module, we study middle concentration type fresnel lens simulation using concentrated type silicon based solar cell. Linear type fresnel lens made production of CPV module without secondary optics such as light pipe or light tunnel. This type of fresnel lens design makes more cost effective solution for cpv niche market.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.25 no.11
• /
• pp.83-90
• /
• 2011

There are two main types of concentrating optical systems in use today: refractive types that use Fresnel lenses, and reflective systems that use one or more mirrors. Regardless of the chosen optical system, the result is concentrated sunlight being aimed at the sensitive face of the cell, to produce more energy from less photovoltaic material. In this paper, for the achieve trackerless CPV system, CPV module included that the spherical lens with reflect mirror makes it possible to achieve high and stable power generation performance for the high concentration photovoltaic power generation system and cope with the needs for a variety of shapes and sizes in flexible manners and that the multiple cavity assemble method greatly reduces costs. Development of these high performance multi-junction CPV module promises to accelerate growth in photovoltaic power generation.