• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.8
• /
• pp.338-343
• /
• 2017

In this study, blast furnace slag powder was used in concrete to help reduce carbon dioxide emissions and to recycle industrial waste. Blast furnace slag powder is a byproduct of smelting pig iron and is obtained by rapidly cooling molten high-temperature blast furnace slag. The powder has been used as an admixture for cement and concrete because of its high reactivity. Using fine blast furnace slag powders in concrete can reduce hydration heat, suppress temperature increases, improve long-term strength, improve durability by increasing watertightness, and inhibit corrosion of reinforcing bars by limiting chloride ion penetration. However, it has not been used much due to its low compressive strength at an early age. Therefore, this study evaluates the effects of steam curing for increasing the initial strength development of concrete made using slag powder. The relationship between compressive strength, SEM observations, and XRD measurements was also investigated. The concrete made with 30% powder showed the best performance. The steam curing seems to affect the compressive strength by destroying the coating on the powder and by producing hydrates such as ettringite and Calcium-Silicate-Hydrate gel.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.210-211
• /
• 2007

Amid booming PV(photovoltaic) industry, BIPV(Building Integrated PV) is one of the best fascinating PV application technologies. To apply PV in building, variable factors should be reflected such as installation position, shading, temperature effect and so on. Especially a temperature should be considered, for it affects both electrical efficiency of PV module and heating and cooling load in building. Transparent PV modules were designed as finished material for spandrels are presented in this paper. The temperature variation of the modules with and without air gap and insulation were compared and analyzed. The results showed that the module with air gap and insulation has a much larger temperature variation than another transparent module. The temperature of the module reached by 55degree C under vertical irradiance of lower 500$W/m^2$. And the temperature difference between these modules was about 15degree C. To analyze the output performance of module according to temperature variation, separate module was manufactured and measured by sun-simulator. The results showed that 1 degree temperature rise reduced about 0.45% of output power.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.4
• /
• pp.733-737
• /
• 2007

The object of this paper is to propose a method to solve resulting heat in using numerous modulized watt-class LEDs in MCPCB as lighting device. To use LED for lighting, the chip needs to have a large capacity, resulting in extra heat in P-N connection area. To solve this problem, a Pottier Module, heat-sink panel and a fan was installed to measure variations in the temperature. Additionally, temperature variation characteristics were observed according to the heat conductor panel connecting cooling module and heat-sink panel, insulator and thermal grease. As a result, the type and amount of heat-sink panel was the most important facto. The fan would effect the temperature by max. $18[^{\circ}C]$ while other materials affected the temperature by $2{\sim}3[^{\circ}C]$, showing significant difference.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.10
• /
• pp.6282-6288
• /
• 2014

$CO_2$ welding is used widely in the field. On the other hand, welding defects occur when welders cannot adjust the current and voltage needed for welding and have to stop working to adjust the current and voltage, causing sudden cooling down of the welding structure inside a vehicle or tank where the control panel is invisible or when work site is far. This study used three types of existing $CO_2$ welders. This also applied SS400 rolled steel for welding structural purposes for remote control torch welding, perform a welding test through v-groove butt welding with a remote control torch and existing $CO_2$ welding torch, conducted visual inspection on the appearance of a welded top bead. In addition, the appearance quality of the welding part was monitored mainly through penetrant testing and a bending test to evaluate the welding defect reduction and the effect on the performance and compatibility by replacing the existing welder.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.2
• /
• pp.666-671
• /
• 2014

Using positive temperature coefficient (PTC) heater as supplementary heating for diesel engine vehicles with low heat source is a good method to enhance the heating performance during cold start. In this study, the PTC elements were made by using screen printing process for forming ohmic contact layer, and prototype of PTC heater was designed and made for a diesel engine vehicle. In process of designing the PTC heater, the thermal flow analysis of PTC element modules was conducted for verifying the effect of the shapes of contact surface between each of the components (cooling fin, insulator, ceramic element). We also investigated the performance characteristic (heating capacity, energy efficiency, pressure drop) of the PTC heater through the experiments. Therefore, the experimental results indicated that prototype of PTC heater had satisfactory performance. This study will be basis for improving the manufacturing process and increasing the performance of the PTC element and heater.

• Journal of the Korean Institute of Gas
• /
• v.24 no.4
• /
• pp.56-61
• /
• 2020

For the hydrogen liquefaction, the large amount of energy is consumed, due to precooling, liquefaction and o-p conversion processes. The aim of this work is to improve the performance of hydrogen liquefaction process by introducing the new energy saving processes, that are the liquid nitrogen precooling process by using LNG cold energy, and the new design of cold box insulation using cold air circulation. The results show that the indirect use of LNG cold energy in precooling process enables not only to get energy saving, but to make safer operation of liquefaction plant. In new cold box, the energy loss of equipments could be reduced by nearly 35%~50% compared to the present perlite insulation, if insulation structure is organised as 3mm steel wall/20cm PUF/5cm air/20cm PUF/equipment. Additionally the equipments installed in cold box can get cooling effect, if the temperature is higher than the temperature of cold air. The application of this results can gives to increase the liquid yield of about 50% substantially in industrial hydrogen liquefaction plant.

• Journal of Life Science
• /
• v.17 no.12
• /
• pp.1739-1743
• /
• 2007

The purpose of this study was to develop a movement program adopted from Bellydance, and to analyze the effects of the Bellydance program on the blood Components and Deoxypyridinoline, Osteocalcin in middle aged women. The Bellydance program was composed of warming-up (10min), main exercise (40min) and cooling-down (10min) parts. The 40 middle-aged women between 40 and 60 year old were divided into two group; the control group (8 women), the Bellydance group (8 women). The Bellydance program was applied three times a 12weeks. The result of this study were as follow. RBC, Hb, WBC, PLT, Osteocalcin was measured in a whole blood. The belly dance group showed WBC was more significantly decreased than control group, but RBC, Hb, PLT were insignificant in other groups. The belly dance group showed Deoxypyridinoline was more significantly increased than control group, but Osteocalcin were insignificant in other groups. Therefore this program can be available in middle aged women.

• Korean Journal of Food Science and Technology
• /
• v.49 no.4
• /
• pp.401-407
• /
• 2017

This study investigated the effect of roasted rice bran (RRB) on bread quality. Bread containing RRB showed small and specific loaf volumes. Baking and cooling loss rates of bread with RRB were lower than bread without RRB. The pH of bread decreased and total titratable acidity increased with increase in the amount of RRB. Water activity (Aw) and moisture contents of bread increased with RRB levels in bread. Bread containing RRB presented lower L value and higher redness (a) and yellowness (b) values. Crumb hardness, springiness, and gumminess increased, whereas cohesiveness decreased upon addition of RRB. Addition of 5% RRB resulted in higher scores in sensory evaluation than the control, however, bread with 15% RRB had the lowest score. Therefore, 5% RRB can be used in bread production.

• Korean journal of food and cookery science
• /
• v.12 no.2
• /
• pp.207-213
• /
• 1996

Effects of replacement of corn starch with Amylomaize Vll starch and addition of enzyme-resistant starch on texture characteristics of com bread (CON) were investigated. Amylomaize-substituted corn bread (AMZ) was made by replacing corn starch with Amylomaize Vll starch. 15% (RSl5) and 30％ (RS30) of butter, was replaced with enzyme-resistant starch (RS) from Amylomaife Vll starch, respectively. Textu,e describing terms were classified according to their physical properties. Result of sensory evaluation characteristics showed that the size of air cells increased as butter replacement level decreased and that hardness increased but springiness decreased as com starch was replaced with Amylomaize Vll starch. The results of Texture Profile Analysis with deformation of 30% and 50% showed that hardness inclosed but cohesiveness decreased as cooling time increased.

• The Korea Journal of Herbology
• /
• v.31 no.6
• /
• pp.63-71
• /
• 2016

Objective : To suggest a scientific evidence of Aconitum carmichaeli Debx. (Aconiti Lateralis Radix Preparata: ALRP) as one of cooling and heating medicines on the regulation of body temperature, we investigated the effects of ALRP water extract on hypothyroidism. Methods : Hypothyroidism was induced by intradermal injection with PTU for 4 weeks in SD rats. ALRP extract or L-thyroxine as a control drug was orally administrated for 2 weeks with PTU injection in rats. The physiological and serological parameters were measured in rats. The histological change of thyroid tissues was observed by H&E staining, and also the expression of thermo-regulating proteins was determined by Western blot in dorsal root ganglia and brain tissues of rats. Results : The administration of ALRP extract in PTU-induced hypothyroidism rats was significantly increased body temperature, but did not changes on body weight, food and water intake. ALRP extract did not effect on the levels of TSH and T4 in the hypothyroidism rats. ALRP extract significantly decreased the levels of GPT, glucose, HDL-cholesterol, LDL-cholesterol, and total cholesterol in the hypothyroidism rats. In histological observation, the enlarged epithelium and atrophic follicles with higher concentration of follicular cells on hypothyroidism were improved by ALRP extract. In addition, ALRP extract increased the expression of TRPV1 and TRPM8 ion channel proteins in hypothyroidism rats. Conclusion : These results indicate that ALRP extract can improve PTU-induced hypothyroidism through regulation of body temperature and lipid accumulation. The action mechanism of ALRP extract is related with body temperature control by thermoregulation with TRP ion channels.