• Ocean Science Journal
• /
• 제42권2호
• /
• pp.103-116
• /
• 2007

Seasonal changes of tide signal(s), temperature, salinity and current were studied during the years 2004-2005 in the northernmost Gulf of Aqaba, which is under developmental activities, to obtain scientific bases for best management and sustainability. Spectrum analysis revealed permanent signals of tide measurements during all seasons, which represented semidiurnal and diurnal barotropic tides. The other signal periods of 8.13, 6.10-6.32, 4.16 and 1.02-1.05 h were not detected in all seasons, which were related to shallow water compound and overtides of principle solar and lunar constituent and to seiches generated in the Red Sea and the Gulf of Aqaba. Spatial and temporal distribution of temperature, salinity and density showed significant differences between months in the coastal and offshore region and no significant differences among the coastal sites, between the surface and bottom waters and between coastal and offshore waters. Therefore, the temporal and spatial variation of water properties in the northernmost Gulf of Aqaba behave similarly compared to other parts. The coastal current below 12 m depth was weak $(3-6\;cms^{-1})$ and fluctuated from east-northeastward to west-southwestward (parallel to the shoreline), which may be related to the effect of bottom topography and/or current density due to differential cooling between eastern and western parts in the study area, and wind-induced upwelling and downwelling in the eastern and western side, respectively. The prevailing northerly winds and stratification conditions during summer were the main causes of the southward current at 6 and 12 m depths with average speed of 28 and $12cms^{-1}$ respectively.

• 동의생리병리학회지
• /
• 제22권3호
• /
• pp.507-515
• /
• 2008

To make a bibliographical review on the most frequently used prescriptions and herbs in treating the uterine carcinoma. 43 texts in China and 6 texts in Korea published since 1980 were reviewed for this objective. 590 Oriental Herbal Medicine formulas composed of 457 herbs were investigated. The frequency and efficacy of each herb used were statistically analyzed. The most frequently used herbal medicine formulas were Danchisoyosan in hepatic Qi stasis, Sihosogan-tang mixed with Lungeumdaebo-tang in damage of conception and thoroughfare vessel, Danchisoyosangagam in blood heat, Hoangyunhaedok-tang in pattern of retained dampness-heat, Jibapjihang-tang in iver-kidney yin deficiency pattern, Naebohyunhapsamyoungbaekchulsan in spleen-kidney yang deficiency pattern. The herbal medicines most frequently used were; Angelicae gigantis radix(126 times), Phellodendri cortex(91 times), Borneolum(87 times), Glycyrrhizae radix and Paeoniae radix alba(82 times), Realgar and Alumen(80times), Poria(77 times), Astragali radix(75 times), Moschus and Myrrha(74 times), Coicis semen and Olibanum(73 times), Codonopsis pilosulae radix and Scutellaria bardata Don(70 times) etc. The effect of the most frequently used herbs were : heat-clearing medicine(12), blood-circulation and stasis-dispelling medicine(9), tonifying and replenishing medicine(5), ointments(5), heat-clearing and blood-cooling medicine(3) and etc. The most frequently used herbs may be applied in future animal studies and clinical trials. Also this data can be used as a reference in formulating new Oriental Herbal Medicine formulas for uterine carcinoma.

• 한국정밀공학회지
• /
• 제18권10호
• /
• pp.134-147
• /
• 2001

Laser cladding process accompanies phase transformations from melting (on heating) through solidifying (on cooling) at the same time within a small material volume and to final solid phase. The phase transformations are not reversible, but an irreversible thermodynamic process; they accompany either absorption or release of thermal energy (referred to latent heat) during transformation. Yet, most analyses on materials processed by laser as a heat source have been performed on models of neglecting the latent heat in the process and those did not Justify the simplification. With literatures on the laser material process, we have not place an answer to how little the assumption affects on analyses. This led us to our current study: the effects of latent heat on thermo-mechanical analysis. To this end, we developed a fairly accurate program accommodating an algorithm for enforcing the latent heat whenever necessary and ran it combining with ABAQUS$^{TM}$. The simulation techniques we used in this study were verified by directly comparing our prediction with experimental publications elsewhere; our numerical results agreed accurately with the experiments. On the effects of the latent heat, we performed two alternatives about considering the latent heat in analysis, and compared each other. As a result, we found that more accurate conclusions might come out when considering the latent heat in process analyses.s.

• Journal of Welding and Joining
• /
• 제31권3호
• /
• pp.31-38
• /
• 2013

The transition of serrated grain boundary and its effect on liquation behavior in the simulated weld heat-affected zone (HAZ) have been investigated in a wrought Ni-based superalloy Alloy 263. Recently, the present authors have found that grain boundary serration occurs in the absence of adjacent coarse ${\gamma}^{\prime}$ particles or $M_{23}C_6$ carbides when a specimen is direct-aged with a combination of slow cooling from solution treatment temperature to aging temperature. The present study was initiated to determine the interdependence of the serration and HAZ property with a consideration of this serration as a potential for the use of a hot-cracking resistant microstructure. A crystallographic study indicated that the serration led to a change in grain boundary character as special boundary with a lower interfacial energy as those terminated by low-index {111} boundary planes. It was found that the serrated grain boundaries are highly resistant to boron enrichment, and suppress effectively grain coarsening in HAZ. Furthermore, the serrated grain boundaries showed a higher resistance to susceptibility of liquation cracking. These results was discussed in terms of a significant decrease in interfacial energy of grain boundary by the serration.

• 대한기계학회논문집B
• /
• 제30권9호
• /
• pp.825-833
• /
• 2006

To investigate the moderator coolability for CANDU-6 reactors, a test facility (HU-KINS) has been manufactured as a 1/8 scaled-down of a calandria tank. In the design of the test facility, a scaling law was developed in such a way to consider the thermal-hydraulic characteristics of a CANDU-6 moderator. The proposed scaling law takes into consideration of the energy conservation, the dynamic similitude such as dimensionless numbers, Archimedes number (Ar) and Reynolds number (Re), and thermal-hydraulic properties similitude. Using this proposed scaling law, the thermal-hydraulic scaling analyses of similar test facilities such as the SPEL (1/10 scale) and the STERN (1/4 scale), have been identified. As a result, in the case of the SPEL, while the energy conservation is well defined, the similarities of Ar and the heat density are not well considered. As for the similarity of the STERN, while both the energy conservation and the characteristics of Ar are well defined, the heat density is not. In the meanwhile, the HU-KINS test facility with 1/8 length scaled-down is well similitude in compliance with all similarities of the energy conservation, the fluid dynamics and thermal-hydraulic properties. To verify the adequacy of the similarities in terms of thermal-hydraulics, a computational fluid dynamic (CFD) analysis has been conducted using the CFX-5 code. As the results of the CFD analyses, the predicted flow patterns and variation of axial properties inside the calandria tank are well consistant with those of previous studies performed with FLUENT and this implies that the present scaling method is acceptable.

• 수산해양기술연구
• /
• 제36권4호
• /
• pp.322-328
• /
• 2000

남해안 연근해에서 조업하는 정치망 어선에 양망작업시 보조기계로 사용되는 캡스턴의 드럼에서 용접부 온도분포 및 구배를 해석한 결과의 주요 사항은 다음과 같다. 1. 용융부 근처는 냉각개시 1초 이내에 950$^{\circ}C$/sec, 10초 이내는 40$^{\circ}C$/see 정도의 급격한 냉각속도가 형성되었다. 2. 열영향부(HAZ)는 용접 후 1초가 경과할 때 370$^{\circ}C$/sec의 가열속도로 온도가 증가한 후, 이 후 25$^{\circ}C$/sec 냉각속도로 온도가 감소한다. 용접종료 10초 후 모재 내부에는 1.64$^{\circ}C$/mm, 40초가 지났을 때는 0.26$^{\circ}C$/mm 정도의 온도구배가 형성되었다. 3. 용접부 근처는 길이 방향을 따라 격심한 온도편차를 보이고 있으나 두께방향으로는 거의 나타나지 않는다. 이 결과는 향후 캡스턴 드럼의 용접부 최적설계시, 탄소성 열응력 및 열변형 거동을 해석하는 연구의 기초자료로 활용될 수 있을 것이다.

• 한국의류산업학회지
• /
• 제22권1호
• /
• pp.66-75
• /
• 2020

This study helps develop cool-touch functional dance sportswear. We suggest a draft design for dance sportswear that chooses appropriate cool-touch functional materials based on an investigation of the changes of body surface temperature before and after exercise, the physical properties of cool-touch materials on the market, and the preference for cooling tools. The results are as follows. First, cool-touch functional sportswear products on the market utilize materials such as PCM, Delta fabric, high gauge fabric, and ice chips as well as incorporate functions such as UV block and eyelets for enhanced breathability. Polyester and polyurethane fibers are mainly used for cool-touch functional sportswear. Second, the neck area showed the highest surface temperatures (32.7℃ and 32.1℃) before and after exercise. Body surface temperatures measured after exercise were also lower than temperatures measured before exercise when wearing dance sportswear. Third, as for the physical properties of cool-touch materials, material 1 showed amaximum drying speed (130 min), material 3 the best moisture absorption speed (122 × 132 min), and material 4 the best thermal conductivity (0.013 7 w/m·K). Fourth, a draft design for a cool-touch functional dance sportswear was suggested, including a neckband made of removable soft PVC material on the neck area and applying material 4 in F1, B4, S2 and lower arm areas and material 1 in the armpit area. Deodorant tape was also attached to the armpit area for added comfort and antibacterial deodorant effect.

• 한국수정란이식학회지
• /
• 제16권2호
• /
• pp.133-138
• /
• 2001

개의 인공수정에 사용할 정자의 보존방법을 확립하기 위하여, 동결속도와 응해 온도를 설정하여 적절한 동결방법을 정립하고자 본 실험을 실시하여 다음과 같은 결과를 얻었다. 동결의 방법에 있어서는 액체질소의 표면으로부터 17 cm 높이에서 동결하는 -3$^{\circ}C$/min의 동결속도로 실시하여 37$^{\circ}C$에서 2분간 응해하는 방법이 가장 좋은 결과를 보였다. 생존성과 운동성에 있어서의 차이는 없지만 첨체의 intact한 비율은 약간 낮은 결과를 보였으며, 이의 보완을 위해, 액체질소 표면으로부터 10cm와 17cm의 높이를 세분화하여 동결속도를 설정한 후보다 나은 정액동결방범을 찾는다면 동결정액을 이용한 인공수정의 수태율은 더욱 향상될 수 있을 것으로 사료된다.

• 한국재료학회지
• /
• 제23권12호
• /
• pp.708-713
• /
• 2013

Graphene oxide has been synthesized by microwave-assisted exfoliation of graphite oxide prepared by modified Hummers method. Graphite was oxidized in a solution of $H_2O_2$ and $KMnO_4$ at $65{\sim}80^{\circ}C$, followed by 10 % $H_2O_2$ solution treatment at $80{\sim}90^{\circ}C$. The graphite oxide was exfoliated under microwave irradiation of 1 kW and was reduced to graphene effectively by hydrazine hydrate ($H_4N_2{\cdot}H_2O$) treatment. The exfoliation of graphene oxide was significantly affected by the microwave irradiation on (heating)/off (cooling) period. An on/off period of 10 s/20 s resulted in much more effective exfoliation than that of 5 s/10 s with the same total treatment time of 10 min. This can be explained by the higher exfoliation temperature of 10 s/20 s. Repetition of the graphite oxidation and exfoliation processes also enhanced the exfoliation of graphene oxide. The thickness of the final graphene products was estimated to be several layers. The D band peaks of the Raman spectra of the final graphene products were quite low, suggesting a high crystal quality.

• 한국정밀공학회지
• /
• 제18권5호
• /
• pp.57-64
• /
• 2001

The high speed in the wire-drawing process to meet the demands for the increased productivity has a great effect on the heat generated due to plastic deformation and friction between the wire and the drawing dies. During the high carbon steel wire drawing process, the temperature rise gives a great influence to the fracture of wire. In this paper, to control the temperature rise in the wire after the deformation through the drawing die, the calculation method of the wire temperature, which includes the temperature rise in the deformation zone as well as the temperature drop in the block considering the heat transfer among the wire, cooling water and surrounding air, is proposed. These calculated results of the wire temperature at the inlet and exit of the drawing die at each pass are compared with the measured wire temperatures and verified its efficiency. So, using the program to predict the wire temperature, the isothermal pass schedule program was developed. By applying this isothermal pass schedule program to the conventional process condition, a new isothermal pass schedule is redesigned through all passes. As a result, the possibility of wire fracture could be considerably reduced and the productivity of final product could be more increased than before.