• 한국전산유체공학회:학술대회논문집
• /
• 2007.10a
• /
• pp.227-231
• /
• 2007

COMS (Communication, Ocean and Meteorological Satellite) is a geostationary satellite and has been developing by KARI for communication and ocean and meteorological observations. It will be launched by ARIANE 5. Ka-band components are installed on South panel, where single solar array wing is mounted. Radiators, embedded heat pipes, external heat pipe, insulation blankets and heaters are utilized for the thermal control of the satellite. The Ka-band payload section is divided several areas based on unit operating temperature in order to optimize radiator area and maximize heat rejection capability. Other equipment for sensors and bus are installed on North panel. The ocean and meteorological sensors are installed on optical benches on the top floor to decouple thermally from the satellite. During the transfer orbit operation, satellite will be under severe thermal environments due to low dissipation of components, satellite attitudes and LAE(Liquid Apogee Engine) firing. This paper presents temperature and heater power prediction and validation of thermal control design during transfer orbit operation.

• Journal of Astronomy and Space Sciences
• /
• v.32 no.3
• /
• pp.221-228
• /
• 2015

To protect and manage the Korean space assets including satellites, it is important to have precise positions and orbit information of each space objects. While Korea currently lacks optical observatories dedicated to satellite tracking, the Korea Astronomy and Space Science Institute (KASI) is planning to establish an optical observatory for the active generation of space information. However, due to geopolitical reasons, it is difficult to acquire an adequately sufficient number of optical satellite observatories in Korea. Against this backdrop, this study examined the possible locations for such observatories, and performed simulations to determine the differences in precision of optical orbit estimation results in relation to the relative baseline distance between observatories. To simulate more realistic conditions of optical observation, white noise was introduced to generate observation data, which was then used to investigate the effects of baseline distance between optical observatories and the simulated white noise. We generated the optical observations with white noise to simulate the actual observation, estimated the orbits with several combinations of observation data from the observatories of various baseline differences, and compared the estimated orbits to check the improvement of precision. As a result, the effect of the baseline distance in combined optical GEO satellite observation is obvious but small compared to the observation resolution limit of optical GEO observation.

• Atmosphere
• /
• v.26 no.2
• /
• pp.215-226
• /
• 2016

Conceptual models to analyze both typhoon and Changma using products extracted by the GEO-KOMPSAT-2A (GK-2A) are suggested in this study. The GK-2A which is scheduled to be launched in 2018 has a high resolution, 16 channels, and 52 products. This means GK-2A is expected to obtain high quality images and products, which can detect severe weather earlier than the Communications, Ocean and Meteorological Satellite (COMS). Since there are not enough conceptual models for typhoon and Changma using satellite images and products, our conceptual model can increase both the applicability of satellite data and the accuracy of analysis. In the conceptual model, typhoons are classified as three types by prevailing factors; 1) heavy-rainfall type, 2) wind type, and 3) complex type. For Changma, two types are divided by the characteristics; band type and heavy-rainfall type. Among the high resolution 52 products, each type of typhoon and Changma are selected. In addition, the numerical products and dynamic factors are considered in order to improve conceptual models.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.9
• /
• pp.60-66
• /
• 2006

Now, on developing COMS(Communication, Ocean and Meteorological Satellite) has solar panel on the south panel only. Therefore, the wheel off-loading has to be performed periodically to reduce a induced momentum energy by a asymmetric solar panel. One of two East/West station keeping maneuver to correct simultaneously longitude and eccentricity, orbit corrections may be performed during one of the two wheel off-loading manoeuvres per day to get enough observation time for meteorological and ocean sensor. In this paper, we applied a linearized orbit maneuver equation to acquire maneuver time and delta-V. Nonlinear simulation for the station keeping is performed and compared with general station keeping strategy for fuel reduction.

• 한국태양에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.342-347
• /
• 2011

Solar energy is attenuated by absorbing gases (ozone, aerosol, water vapour and mixed gas) and cloud in the atmosphere. And these are measured with solar instruments (pyranometer, phyheliometer). However, solar energy is insufficient to represent detailed energy distribution, because the distributions of instruments are limited on spatial. If input data of solar radiation model is accurate, the solar energy reaches at the surface can be calculated accurately. Recently a variety of satellite measurements are available to TERA/AQUA (MODIS), AURA (OMI) and geostationary satellites (GMS-5, GOES-9, MTSAT-1R, MTSAT-2 and COMS). Input data of solar radiation model can be used aerosols and surface albedo of MODIS, total ozone amount of OMI and cloud fraction of meteorological geostationary satellite. The solar energy reaches to the surface is calculated hourly by solar radiation model and those are accumulated monthly and annual. And these results are verified the spatial distribution and validated with ground observations.

• Electronics and Telecommunications Trends
• /
• v.21 no.4 s.100
• /
• pp.107-117
• /
• 2006

위성 탑재체 제조 산업은 기초 과학이 뒷받침된 초정밀 기계 공학, 첨단 전자 기술, 극한 환경 기술 및 신소재 공학 등과 같은 첨단 산업의 집합체라 할 수 있다. 현재 미국을 비롯한 서구 선진국에서 진행중인 탑재체 기술동향을 보면, 폭발적으로 증가하는 위성수에 따라 위성 궤도가 부족하고 주파수 자원이 고갈되고 있는 상황에서 통신 위성의 효율성과 성능을 향상시킬 수 있는 신호처리 탑재(OBP) 위성과 통신기능을 포함한 다양한 기능을 가진 복합위성 개발이 진행되고 있으며 주파수 대역의 포화와 광대역 멀티미디어 서비스 제공 등을 위해 보다 높은 주파수의 준 밀리미터파 대역(Ka 대역) 위성 개발이 활발히 이루어지고 있다. 국내에서는 현재, 2008년 발사를 목표로 마이크로스위치 매트릭스(MSM)가 탑재되어 빔간 스위칭이 가능하도록 설계된 통신해양기상위성(COMS)용 통신 탑재체(SACOM) 개발이 진행중이다. 국내의 위성탑재용 RF 부품분야는 1990년부터 위성 중계기 시스템의 기본적인 설계, 조립, 종합화, 시험기술을 바탕으로 통신위성 탑재체용 초고주파 부품을 개발하여 왔으며, 2000년대에는 Ku 대역(12/14GHz) 및 Ka 대역(20/30GHz) 기술인증모델(EQM) RF 부품을 성공적으로 개발하였다. 이를 바탕으로 통신해양기상위성 통신탑재체용 Ka 대역 RF 부품이 현재 우주인증 모델(QM)의 개발이 완료되었으며 비행 모델(FM) 개발이 진행중이다.

• Proceedings of the KSRS Conference
• /
• 2009.03a
• /
• pp.367-370
• /
• 2009

한국해양연구원에서는 2009년 발사 예정인 통신해양기상위성(COMS: Communication, Ocean and Meteorological Satellite)의 해색센서인 정지궤도 해양위성(GOCI: Geostationary Ocean Color Imager) 데이터의 수신, 처리, 배포를 위한 해양위성센터(KOSC: Korea Ocean Satellite Center)를 구축하고 있다. 2005년 "해양위성센터 구축사업"의 시작으로, 전파 수신 환경 등의 조건을 고려하여, 안산에 위치한 한국해양연구원 본원으로 해양위성센터의 위치를 최종 확정하여 구축을 진행하고 있다. 2009년 3월 현재 수신시스템(GDAS: GOCI Data Aquisition System), 자료전처리시스템(IMPS: Image Pre-processing System), 자료처리시스템(GDPS: GOCI Data Processing System), 자료관리 시스템(DMS: Data Management System), 통합감시제어시스템(TMC: Total Management & Controlling System), 기관간 자료교환시스템(EDES: External Data Exchange System) 등이 구축 완료되었고, 위성자료 배포시스템(DDS: Data Distribution System)을 구축하고 있다. 고용량 데이터의 원활한 전송을 위한 데이터센터를 비롯하여 사용자관점에서의 시스템 구축을 추진하고 있으며, 위성 발사 후 사용자 등록을 시작할 계획이다.

• Journal of electromagnetic engineering and science
• /
• v.16 no.2
• /
• pp.80-86
• /
• 2016

This paper proposes the algorithm for forward link adaptive coding and modulation (ACM) and the detailed design for a satellite communication system to improve network reliability and system throughput. In the ACM scheme, the coding and modulation schemes are changed by as much as the channel can provide depending on the quality of the communication link. To implement the forward link ACM system in the Ka-band, channel prediction and modulation/coding decision methods are proposed and simulated. The parameters of the adaptive filter predictor based on the least mean square are optimized, the minimum mean square error of the channel predictor is 0.0608 when step size and the number of filter tap are 0.0001 and 4, respectively. A test-bed is set up to verify the forward link ACM system, and a test is performed using a Ka-band satellite (i.e., Communication, Ocean, and Meteorological Satellite [COMS]). This test verifies that the ACM scheme can increase the system throughput.

• Korean Journal of Remote Sensing
• /
• v.32 no.1
• /
• pp.25-38
• /
• 2016

With the increasing need for high temporal resolution satellite imagery for monitoring land surfaces, this study evaluated the temporal resolution of the NDVI composites from Geostationary Ocean Color Imager (GOCI) data. The GOCI is the first geostationary satellite sensor designed to provide continuous images over a $2,500{\times}2,500km^2$ area of the northeast Asian region with relatively high spatial resolution of 500 m. We used total 2,944 hourly images of the GOCI level 1B radiance data obtained during the one-year period from April 2011 to March 2012. A daily NDVI composite was produced by maximum value compositing of eight hourly images captured during day-time. Further NDVI composites were created with different compositing periods ranging from two to five days. The cloud coverage of each composite was estimated by the cloud detection method developed in study and then compared with the Moderate Resolution Imaging Spectroradiometer (MODIS) Aqua cloud product and 16-day NDVI composite. The GOCI NDVI composites showed much higher temporal resolution with less cloud coverage than the MODIS NDVI products. The average of cloud coverage for the five-day GOCI composites during the one year was only 2.5%, which is a significant improvement compared to the 8.9%~19.3% cloud coverage in the MODIS 16-day NDVI composites.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.265-265
• /
• 2012

한반도 지역의 강설(snowfall)은 전체 연 강수량의 약 10% 이하로 매우 적은 양을 차지하고 있다. 하지만 강설은 대기질(air quality)을 개선하고 산불 발생률을 저감시키며, 특히 봄철 수자원의 제공과 가뭄피해 경감 등 수문학적으로도 중요한 기능을 가진다. 하지만 최근 기후변화로 인해 폭설 현상이 빈번하게 발생하여 사회 경제적 손실을 유발하고 있다. 따라서 강설로 인한 피해를 최소한으로 줄이기 위해서는 정확한 강설탐지 및 강설 추정 방법이 필요하다. 최근 해외의 수많은 연구들을 통하여 수동 마이크로파 센서 자료를 활용한 강설 추정의 가능성이 확인되고 있다. 하지만 수동 마이크로파 센서의 휘도온도를 이용한 추정 방법들은 대기의 연직 구조 파악에 어려움이 있기 때문에 정확한 강설량을 추정하는 데에 한계가 있다. 그러나 2006년 발사된 CloudSat의 Cloud Profiling Radar는 강설의 연직 프로파일에 대한 가치 있는 정보를 제공하기 때문에 수동 마이크로파 센서 자료와의 결합을 통해 보다 정확한 강설 추정 알고리즘을 제시할 수 있을 것으로 판단된다. 따라서 본 연구에서는 CloudSat의 Cloud Profiling Radar (CPR) 자료와 수동 마이크로파 센서인 NOAA의 Microwave Humidity Sounder (MHS) 센서 자료를 결합하여 한반도 강설 추정에 적합한 알고리즘을 개발하고자 한다.