• 한국산림과학회지
• /
• 제64권1호
• /
• pp.26-32
• /
• 1984

본(本) 연구(硏究)는 COMPLY의 core에 사용(使用)되는 파티클보오드를 내수처리(耐火處理)파티클보오드로 사용(使用)하였을 때 COMPLY의 강도적(強度的) 성질(性質)에 미치는 영향(影響)을 규명하고져 실시(實施)하였다. Ammonium sulfate의 경우 COMPLY의 MOR은 약액농도(藥液濃度)가 증가(增加)함에 따라 약액농도(藥液濃度)가 10%까지는 증가(增加)하나 그 이후(以後)는 감소(減少)하는 경향(傾向)을 나타내고 있으며 Minalith의 경우는 ammonium sulfate의 경우와는 반대경향(反對傾向)을 나타내고 있다. COMPLY의 MOE는 약액농도(藥液濃度)가 증가(增加)함에 따라 감소(減少)하는 경향(傾向)을 나타내고 있지만 약액농도간(藥液濃度間)에 유의적(有意的)인 차이(差異)는 나타내고 있지 않다. COMPLY의 전단강도(剪斷強度)는 약제(藥劑)의 처리농도증가(處理濃度增加)에 따라 증가(增加)하는 경향(傾向)을 나타내고 있으나 유의적(有意的)인 차이(差異)는 없으며 ammonium sulfate보다는 Minalith가 더 양호(良好)한 결과(結果)를 나타내고 있다. COMPLY의 목피율(木破率)은 15%농도(濃度)까지는 증가(增加)하는 경향(傾向)을 보이고 있으나 그 이후(以後)는 감소현상(減少現象)을 나타내고 있다. 평행(平行) 및 교호적층재(交互的層材)의 결과(結果)는 COMPLY 결과(結果)보다 대체로 좋은 결과(結果)를 나타내고 있으나 무처리(無處理)파티클보오드의 결과(結果)는 저조(低調)한 결과(結果)를 나타내고 있다. 약제처리(藥劑處理) COMPLY의 MOR, MOE는 무처리(無處理) 파티클보오드의 결과(結果)보다 136%, 170%로 각각(各各) 증가(增加)하였다. 따라서 내수처리(耐火處理)로 인(因)한 파티클보오드의 강도감소현상(強度減少現像)은 COMPLY를 제조(製造)함으로서 강도적(強度的) 특성(性質)을 개선(改善)시킬 수 있다.

• Journal of the Korean Wood Science and Technology
• /
• 제13권3호
• /
• pp.3-26
• /
• 1985

The object of this study was to investigate the effects on physical and mechanical properties of wood particle and sawdust board combined with wire net. Conventional forming, press-lam, and veneer comply boards combining one to four wire net sheets were made from wood particle and sawdust with different spacings (8, 10, 12, and 18 Mok) and different wire diameters (0.35, 0.50, and 0.80mm) composing wire net. They were compared and analyzed statistically with specific gravity, thickness swelling, length swelling, bending properties (modulus of rupture, modulus of elasticity, work to proportional limit, and total work), internal bonding strength, and screw holding strength between wood particle and sawdust boards. The results obtained at this study as cording to the discussions might be concluded as follows; 1. In specific gravity, both particle and sawdust boards by press-lam method were higher than by conventional forming and veneer comply method, and the boards containing more wire net sheets also showed higher value. But the wire net spacings(Mok) had no influence on specific gravity. In general, particle board showed higher specific gravity than sawdust board. Veneer comply board showed lowest specific gravity values. 2. Both particle and sawdust boards by press-lam method was slightly lower than by conventional forming and veneer comply method in thickness swelling. The sawdust board containing 8, 12. and 18 Mok wire net showed lower thickness swelling than the corresponding particle board, but both sawdust and particle boards containing the T8 and 10 Mok wire net showed higher and similar thickness swelling. 3. Both particle and sawdust boards containing wire net showed no difference in MOR and MOE of bending. Comply board was the highest and particle board showed slightly higher than sawdust board in MOR and MOE values. 4. In work to proportional limit and total work in bending, both particle and sawdust boards containing thicker wire diameter and more wire net sheets showed higher value. From these facts, it is conceivable that boards with thicker wire diameter and more wire net sheets show increasing resistance against external force. But there was no significant difference between particle and sawdust borads. 5. In resistance against delamination (internal bonding strength), both sawdust and particle boards containing wire net showed lower value than control, and also showed decreasing tendency with more number of wire net sheet composed. Particle board showed higher resistance against delamination than sawdust board. 6. In screw holding strength, sawdust board containing thicker wire diameter and more wire net sheets showed higher value, but particle board by press-lam method was higher than by conventional forming and veneer comply method. Screw holding strength of particle board was higher than that of sawdust board.

• Journal of the Korean Wood Science and Technology
• /
• 제18권4호
• /
• pp.86-101
• /
• 1990

The primary objective of this research was to investigate the strength properties of Comply, a composite panel. fabricated with particle board as core material and veneer or plywood as face and back. 20types of comply composites were manufactured according to the four specific gravity levels(0.5, 0.6, 0.7 or 0.8) of particleboard core and three veneer or two plywood thicknesses for face and back. They were tested and compared with matching particleboard (control) on moisture content. specific gravity, bending properties(MOE, MOR SPL). nail resistance and internal bond strength. The obtained results were summarized as follows: The increasing effect of modulus of elasticity was shown by the increase of face and back veneer or plywood thickness. The modulus of rupture and stress at proportional limit of the comply composites bonded with 3mm thick veneers or 3mm thick plywood face and back were higher than 2mm thick veneer or 2mm thick plywood as face and back. Both of modulus of rupture and stress at proportional limit on bending of Comply were higher than those of control board. Also the modulus of elasticity of Comply showed much higher than that of control board. The nail resistance of Comply, composed of plywood as face and back was higher than that of veneer. The nail resistance of control board was higher than that of Comply at Sp.Gr 0.7 and 0.8 core boards. Internal bond of Comply, composed of 1mm and 2mm thick veneer as face and back was higher than that of 3mm thick veneer. The increasing effect of modulus of elasticity was shown by the increase of shelling ratio in Comply composed of veneer and plywood as face and back. The modulus of rupture was increased by the increment of shellmg ratio in Compiy, composed of plywood as face and back. The modulus of elasticity and modulus of. rupture of comply were higher than those of particleboard(control) in effect of shelling ratio. Therefore it was concluded that the mechanical property values of Comply were clearly greater than those of particleboard(control).

• The Journal of Asian Finance, Economics and Business
• /
• 제7권4호
• /
• pp.71-80
• /
• 2020

The paper examines the influence of corporate governance (CG) and earning quality (EQ) on corporate value (FV) of Vietnamese enterprises. The study uses GLS regression and linear structure model using data collected from companies listing on the stock market in Vietnam during 2008-2018, with a total of 2,937 observations. The research results indicate that EQ and CG represented by the Integrated Board of Directors and the Integrated Supervisory Board have a positive effect on FV directly and indirectly. The results show that the Integrated Board of Directors has a positive effect on EQ, whereas the Integrated Supervisory Board has a negative effect on EQ. Based on the research results, we suggest that companies need to strictly comply and implement GC, so to bring down the agency cost and consequently to increase performance. The companies also should establish the Board of Director of a proper size, with financial and accounting specialty, and including women board members. The government also needs to improve the management mechanism asking for firms to prepare and publish financial statements with reliable company information, which could be provided to users. These recommendations are a useful basis to help businesses improve FV via changes in the corporate governance factors in each enterprise.

• International Journal of Quality Innovation
• /
• 제2권2호
• /
• pp.69-92
• /
• 2001

The laser-assisted seeding (LAS) process has potential to replace conventional electroless copper plating in Printed Circuit Board (PCB) manufacturing since it combines the steps of laser drilling and plating into one single process. In the LAS process, the single extra LAS step can metallize a microvia. Thus, the process steps can be greatly reduced and the productivity enhanced, but also the high aspect ratio microvias can be metallized. The objectives of this paper are to study the LAS copper thickness within PCB microvias and the thermal reliability of the microvias produced by this process. It was found that results were satisfactory in both the reliability test and also the LAS copper thickness which both comply with IPC standard, the copper thickness produced by the LAS process is sufficient for subsequent electro-plating process. The reliability of the microvias produced by LAS process is acceptable which are free from any voids, corner cracks, and distortion in the plated copper.

• 보건행정학회지
• /
• 제32권1호
• /
• pp.1-2
• /
• 2022

With the rising attention dedicated to research ethics, the responsibility of researchers to comply with research ethics is also highlighted. Among a number of research ethics obligations that researchers should abide by, an institutional review board (IRB) review is the most essential step to be taken before launching research. As the health service research field grapples with human subjects, it closely aligns with IRB deliberation. However, it seems that researchers still do not fully understand their obligations of IRB reviews. Due to the nature of health services research, there are many cases that are exempt from IRB reviews, which often elicits confusion in the research field. On that note, we aim to explore the issues regarding IRB reviews that health service researchers need to know.

• The Journal of Asian Finance, Economics and Business
• /
• 제7권11호
• /
• pp.327-333
• /
• 2020

Corporate social responsibility is an inevitable trend in the global context. It is the responsibility of the organizations to the community and society to ensure the fairness of the interests of stakeholders. This is an issue that deserves attention, not in the national or regional level, but as a global issue. The purpose of article is to examine the effect of corporate governance on corporate social responsibility disclosure of 155 samples of 31 Vietnamese commercial banks from 2015 to 2019. The data of this study is employing time-series data and used the ordinary least squares to test the model. The results show that there are three factors that positively affect corporate social responsibility disclosure, namely, board size, foreign members of board, and audit committee. Thereby, the article proposes that board of director in Vietnamese commercial banks needs to raise awareness about corporate social responsibility, and the Central bank of Vietnam should monitor the disclosure of information regularly with severe sanctions on commercial banks that do not comply with the regulations of corporate social responsibility disclosure. This contributes to improving the information quality of the banking sector to meet the trend of international economic integration.

• 대한전기학회논문지
• /
• 제40권2호
• /
• pp.207-216
• /
• 1991

In the case that the robot manipulator should respond to the variance and uncertainty of the environment in performing preforming precision tasks, it is indispensable that the robot utilizes the various sensors for intrlligence. In this paper, the robot force control method is implemented with a force/torque sensor, two personal computers, and a PUMA 560 manipulator for performing the various application tadks. The hybrid position/force control method is used to control the force and position axis separately. An interface board is designed to read the force/torque sensor output into the computer. Since the two computers should exchange the information quickly, a common memory board is designed. Before the algorithms of application tasks are developed, the basic force commands must be supplied. Thus, the MOVE-UNTIL command is used at the discrete time instant and, the MOVE-COMPLY is used at the continuous time instant for receiving the force feedback information. Using the two basic force commands, three application algorithms are developed and implemented for edge-following, insertion, and grinding tasks.

• 한국항해항만학회지
• /
• 제38권3호
• /
• pp.193-202
• /
• 2014

The comprehensive review of the STCW 1978, as amended in 1995 and associated Code was carried out from 2006 to 2010. These amendments will have a certain degree of impact on Maritime Education and Training(MET) institutes in terms of education and training of seafarer worldwide. Particularly, the Far East region countries are effected more than other regions since they covered about 30% of officers and 37% ratings in the world. In view of these facts this dissertation conceived to analyze the problems in the Far East main seafarer supply countries faced the implementation of "STCW Manila Amendments" To analyze these problems, this dissertation carried out questionnaire research to 7 targeted main MET of major Far East seafarer supply countries. After research this dissertation suggests the possible solutions such as, Joint On-Board Training Center; Joint Asia Maritime E-learning Systems; methods to reducing work-load, ship inspection burden and determine mandatory minimum safety manning standards in a safe way; technical cooperation fund to installation of training equipment; and clarify vague terminology of STCW Manila Amendments, to solve problems identified through the questionnaires.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2023년도 춘계학술대회
• /
• pp.7-9
• /
• 2023

국내법에서는 시운전 금지해역을 설정하고 이 구역에서 금지되는 시운전(Sea trial)을 규정하고 있다. 하지만 이용자에 따라 시운전이라는 용어를 수리 후 테스트(On board Test)하는 것을 혼용하여 사용하고 있고, 특히 수리 조선소 등에서 선박의 개조, 수리 후 시운전이라 행하는 테스트를 하는 선박은 이러한 규정을 따르지 아니한다. 본 연구를 통하여 이러한 선박도 시운전으로 해석할 수 있는지 관련 법 조항을 살펴보고, 시운전 선박에 준하는 위험성을 내포한 수리 선박 관리의 필요성을 제시하고자 한다.