• Fisheries and Aquatic Sciences
• /
• v.13 no.1
• /
• pp.63-70
• /
• 2010

Two feeding experiments were conducted to investigate the effects of dietary genetically modified (GM) soya and com on growth performance, feed utilization and body composition of juvenile olive flounder, Paralichthys olivaceus and rockfish, Sebastes schlegelii. For each fish species, four isonitrogenous (50% crude protein) and isocaloric (4.1 kcal/g) diets (designated as nGM soya, GM soya, nGM com and GM com) were formulated to contain 20% non-GM (nGM) and GM soya and com. Thirty olive flounder (initial body weight, 15.4${\pm}$0.4 g) and fifty rockfish (initial body weight, 3.1${\pm}$0.02 g) were distributed in each 400 L tank (200 L water) in a flow through system. Each experimental diet was fed to triplicate groups of fish to visual satiation, twice a day (9:00 hand 17:00 h) for 6 weeks. Growth performance was measured every three weeks. No effects of GM feedstuffs on survival were observed. Dietary inclusion of GM feedstuffs did not affect growth performance and feed utilization of fishes, except for rockfish fed GM com. Rockfish fed the GM com diet showed higher weight gain, daily feed intake and daily protein intake than did fish fed the nGM com diet, but no significant differences were observed in final body weight between the dietary treatments. Condition factor, hepatosomatic index, visceral somatic index and body composition were not altered by the inclusion of GM feedstuffs. These results indicate that dietary inclusion of GM soya and com could have no effects on growth performance and feed utilization of juvenile flounder and rockfish. Lower weight gain and feed intake in flounder and rockfish fed the diets containing 20% soya were likely due to anti-nutritional factors, rather than transgenic factors in the feedstuffs. Dietary inclusion of GM soya and com at the level tested did not alter the body composition of fishes. Further studies to investigate the effects of GM feedstuffs on health conditions and the development of fishes, as well as those of residue of transgenic fragments in ambient environments and in animals are necessary for safe use of the ingredients in aquaculture.

• Korean Journal of Cleft Lip And Palate
• /
• v.4 no.2
• /
• pp.51-68
• /
• 2001

Midfacial hypoplasia in patients with clefts of the lip and palate is considered to be the result of congenital dysmorphogenesis. And cleft lip and palate developes facial deformity, jaw abnormality, speech problem, which is most frequent hereditary deformity in maxillofacial region. So cleft lip and palate is characterized by midface deformity which shaws maxillary anterior nasal septal deviation and deformity. Our study describes congenital correlates of midfacial hypoplasia by examining the displacement of a normal complement of parts, a triangular tissue deficiency low on the lip border on the columellar side, and a linear deficiency and displacement in the line of the bilateral cleft lip. 15 patients with bilateral cleft lip and palate were taken impression before operation, but the patient who had other abnormalities and complications were excluded. Average age is 3.4 months and they were classified into both complete, both incomplete and complete & incomplete group. The obtained results were as follows 1. There were no differences on intercanthal width and canthal width between each of the groups. 2. Both complete group had longer lateral ala length than both incomplete group, but there were no differences between both complete group and complete side of com. & incom. group and both incomplete group and incomplete side of com. & incom. group. 3. Columella length was greater in both incomplete group than in both complete group, but there was no difference between both complete group and complete side of com. & incom. group and both incomplete group and incomplete side of com. & incom. group. 4. Both complete group had longer ala width & ala base width than both incomplete group had. But there were no differences between both complete group and complete side of com. & incom. group and both incomplete group and incomplete side of com. & incom. group. 5. There were no differences between each of the groups on upper lip length, but nose/mouth width ratio was greater in both complete group than in both incomplete group. 6. Pronasale(pm), subnasle(sn), la~rale superioris(ls), stomion(sto) points were located around the central vertical line of face but deviated to incomplete side in com. & incom. group. 7. Nasal tip protrusion was greater in both incomplete group and com. & incom. group than both complete group, but there was no difference between both incomplete group and com. & incom. group.

• Journal of Korean Neurosurgical Society
• /
• v.40 no.6
• /
• pp.455-458
• /
• 2006

The incidence of blindness after aneurysm surgery is very rare. We experienced a case of unilateral blindness after internal carotid artery[ICA] aneurysm wrapping. A 43-year-old male immediately developed ipsilateral ocular pain and visual loss in his left eye after the treatment of a lateral ICA aneurysm by wrapping with muscle pieces. He had also multiple aneurysms, which were multilobulated anterior communicating artery [A-com], middle cerebral artery[MCA] and posterior communicating artery [P-com] aneurysms. Coilings were done for a part of A-com artery aneurysm and P-com artery aneurysm on admission. The remaining A-com artery aneurysm was clipped and ICA aneurysm was wrapped with temporal muscle piece. A retrobulbar optic neuropathy might have resulted from either direct injury or damage to small dural vessels of the posterior optic nerve. Actually, the optico-carotid space was tight and the optic nerve was compressed by swollen muscle piece. Despite releasing of compression of the optic nerve on second day, his visual loss was irreversible.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.9
• /
• pp.1918-1924
• /
• 2011

This article proposes a POD system framework which creates templates by using the Web service environment with good accessibility, provides them so that users can easily edit them, and uses COM ports following Web standard capable of real-time printing with the same quality as edited files. The characteristic of framework proposed in this article is that it creates programs which users with basic skill in Internet use can learn and use relatively easily when compared with existing specialized editing programs and which allows users to print real-time such files as personally created by them in the same quality as on the screen, and thereby enhances accessibility thereof.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.4
• /
• pp.794-799
• /
• 2015

To manage cell outage problem in indoor wireless communication systems, we should resolve the problem of abrupt network failure quickly. In this paper, we propose a near-optimal cell outage management (NoCOM) scheme to support seamless services to users. In consideration of system throughput, user fairness, and the guarantee of QoS simultaneously, the NoCOM scheme finds the solution of subchannel and power allocations using a non-convex optimization technique and allocates radio resources to users iteratively. Through intensive simulations, we verify the outstanding performances of the proposed NoCOM scheme with respect to the average cell capacity, user fairness, and computational complexity.

• The Bulletin of The Korean Astronomical Society
• /
• v.42 no.2
• /
• pp.64.1-64.1
• /
• 2017

접촉쌍성 EK Com은 0.2667일의 짧은 주기를 가진 만기형 식쌍성으로 광도곡선의 변화로 인해 연구자마다 이계의 하위 유형을 다르게 언급하여 하위유형의 혼동이 있는 천체이다. 우리는 소백산천문대에서 2009년 5월 VR 필터로, 2013년 2 ~ 5월 사이 BVRI 필터로, 2016년 1 ~ 4월 사이 R 필터로 CCD 측광 관측하여 3개의 새로운 광도곡선을 획득하였다. 우리의 관측 자료와 SuperWASP의 공개된 자료로부터 40개의 새로운 극심시각을 산출하였다. 이 극심시각을 포함하여 155개의 극심시각을 여러 문헌에서 수집하여 주기 연구를 수행한 결과, EK Com의 공전주기는 영년 주기 증가와 더불어 8.2년의 주기적인 변화가 겹쳐 변화함을 발견하였다. 이러한 주기 변화 원인에 대하여 살펴본 결과, 영년주기변화는 질량이 작은 별에서 큰 별로의 질량이동에 의하여 일어나고, 주기적인 변화는 질량이 큰 주성의 자기 활동에 의해 발생할 수 있음을 보였다. Wilson-Devinney code를 이용한 광도곡선 분석을 통하여 EK Com은 개기식이 부식에 있는 하위 유형 A라기 보다 주식에 있는 W형에 속하며, 모든 광도곡선에서 1개의 Hot spot과 1개의 Cool spot을 가진 모형이 가장 관측치를 잘 설명한다. W UMa형 별들의 HR도, 온도비, 질량의 그래프에서 EK Com은 W형 Group들이 있는 위치에 존재한다. 이는 광도곡선에서 유추한 EK Com의 하위 유형과도 일치한다.

• Food Science and Biotechnology
• /
• v.17 no.4
• /
• pp.814-818
• /
• 2008

Com and rice starches were physically modified by planetary mill. While native starches showed high peak viscosities (1,001 and 563 cp), it decreased largely (42 and 20 cp for rice and com starch, respectively) after 2 hr of physical modification. When two starches were co-ground, peak viscosities decreased more largely than single ground one only in 30 min, indicating the pasting properties could be easily changed by co-grinding. Especially, the higher the amount of com starch, the viscosity decreased more largely, which means that paste stability could be controlled also by changing the ratio of com and rice starch. Mean particle size increased with physical modification time since particles became spread because of shear force. There were also changes in surface morphology after physical modification. Fluid property, such as mean time to avalanche (MTA), was improved (from $6.16{\pm}0.47$ and $8.37{\pm}1.23\;sec$ to $5.47{\pm}0.78$ and $5.26{\pm}1.37\;sec$ for rice and com starch, respectively) by physical modification. Pasting property, such as swelling power, was also improved by physical modification. These mean that native starches can be applied to both conventional powder and new paste-food industry more efficiently by physical modification.

• Journal of the Korean Wood Science and Technology
• /
• v.47 no.2
• /
• pp.239-248
• /
• 2019

This research presents an improvement of the physical and mechanical properties of composite board (com-ply) made of Oriented Strand Board (OSB) coated with wood veneer of Pine (Pinus merkusii), Avocado (Persea Americana) and Mahogany (Swietenia mahogany). 1.5 mm thick veneers of those three wood types were adhered to the surface of OSB using two adhesive types: epoxy and isocyanate. The adhesive with the glue spread of $250g\;m^{-2}$ applied using single glue line was spread and then cold pressed with the pressure of $15kg\;cm^{-2}$ for 3 hours. The research result showed an improving dimension stability of com-ply, but not found on all parameters of physical property test. The moisture content seemed to be influenced by the com-ply type, yet not related to its thickness swelling, water absorption and linear expansion. The exception took place in the parallel linear expansion when immersed for 2 hours. The highest to the lowest increases of MOE and MOR were consecutively found on OSB coated with wood veneer of Pine, Mahogany and Avocado. However, the increases were statistically insignificant. The highest increasing screw hold power was found at the com-ply type AE (avocado veneer and epoxy adhesive) that was by 28%.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.24 no.2
• /
• pp.115-122
• /
• 2004

This study was conducted to investigate the effect of the seeding and harvesting dates on the growth characteristics, dry matter yield and quality of com for silage in alpine area(altitude 800m a.s.l.) of National Livestock Research Institute from 2001 to 2002. The experiment was arranged in a split plot design with three replications. Main plots consisted of three seeding dates, 10 May, 20 May and 30 May. Sub plots consisted of harvesting dates, 15 September, 25 September and 5 October. Tassel height of com was decreased with seeding dates, 30 May, 10 May and 20 May in order, and harvesting date of 5 October was apt to be high. Ear height of com was decreased with seeding dates, 20 May, 30 May, and 10 May in order, and harvesting date of 15 September was the lowest of all treatments. Ear rate of com was decreased with late seeding dates, and it was the highest with harvesting date of 5 October. Dry matter yield was decreased with late seeding dates(P<0.05), and it was increased with late harvesting regardless of seeding dates(P<0.05). Crude protein content of com stover was increased with late seeding dates, and that of com ear was the highest with seeding date of 20 May. And crude protein contents of com stover and ear were the highest with harvesting date of 15 September. NDF contents of com stover and ear were the highest with seeding date of 10 May and 20 May, respectively, and NDF content of com stover was the highest with seeding date of 10 May and there was no difference among treatments in NDF content of ear. ADF content of com stover was 42.1 to 42.6% regardless of seeding dates, and that of com ear was the highest with seeding date of 30 May. ADF content of com stover and ear was increased with early harvesting date excepting for harvesting date of 20 May. These results indicate that 20 May and 25 September would be the optimum seeding date and harvesting date, respectively, for dry matter yield and nutritive value of silage com in alpine area.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2000.04a
• /
• pp.363-369
• /
• 2000

Farming 이란 Farmer 모델에서 제안하는 컴포넌트 아웃소싱을 의미한다. Farming 개념을 구현하기 위하여 본 논문에서는 컴포넌트 기반 개발( Component-Based Development) 개념을 도입하였다. 컴포넌트는 컴포지션에 의한 소프트웨어 블록 재사용성을 제공하며 컴포넌트는 이들의 수행하는 기능에 대한 명세를 나타내는 인터페이스 명세모델이반드시 필요하게 된다. 본 논문에서는 Farmer 모델링 방법론에 의하여 디자인되어진 시스템을 컴포넌트 기반 개발의 인터페이스 명세모델로의 변형(Transformation ) 메카니즘인 FTI 알고리즘 및 COM IDL 과의 상호관련성에 대하여 소개한다.