• 한국연소학회:학술대회논문집
• /
• 2006.04a
• /
• pp.49-54
• /
• 2006

The present study conducted a numerical modeling on the diesel SCR (selective catalytic reduction) system using ammonia as a reductant over vanadium-based catalysts $(V_2O_5-WO_3/TiO_2)$. Transient modeling for ammonia adsorption/desorption on the catalyst surface was firstly carried out, and then the SCR reaction was modeled considering for it. In the current catalytic reaction model, we extended the pure chemical kinetic model based on laboratory-scale powdered-phase catalyst experiments to the chemico-physical one applicable to realistic commercial SCR reactors. To simulate multi-dimensional heat and mass transfer phenomena, the SCR reactor was modeled in two dimensional, axisymmetric domain using porous medium approach. Also, since diesel engines operate in transient mode, the present study employed an unsteady model. In addition, throughout simulations using the developed code, effects of space velocity on the DeNOx performance were investigated.

• Journal of Power System Engineering
• /
• v.19 no.6
• /
• pp.54-59
• /
• 2015

This paper is a numerical study on the correlation of leakage by the variation of operating temperature and orifice diameter applying to hydrostatic bearing in hydraulic actuator. Compared with Brackbill and Kandlikar experimental paper to verify the validity of the numerical analysis technique of the present study, we derive the result that the results of experiments and numerical analysis to match very well. CFD analysis program were analyzed using a commercial code FLUENT V14.5. Inlet and outlet, were applied pressure conditions, the main variables of the analysis is temperature and the orifice inner diameter. The analysis results, pressure value has decreased as the oil temperature and the orifice diameter increases.

• Journal of Korean Vacuum Science & Technology
• /
• v.3 no.1
• /
• pp.59-65
• /
• 1999

There has been an interest to develop an efficient, compact microwave device using field-emitter-arrays (FEA)-based cathode. Toe valuate the optimum device-efficiency in a compact size, the propagation properties of the premodulated electron beam for the FEA-based cathode is studied in detail by the computer simulation using a PIC code, MAGIC. For the premodulated electron beam whose phase of the energy leads the phase of the current by $\pi$/2, the amplitude of the downstream current modulation can be kept as high as the initial modulation level. Using the beam parameters with the beam voltage of 6kV and the current of 2.0A, 30% of efficiency is predicted when the quality factor of 800 is chosen. the device length is reduced about twice compared with that of the conventional device. The design of practical planar cathode is carried out to meet the minimum diameter of the electron beam as 0.5 mm.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.2
• /
• pp.90-95
• /
• 2001

f-$\theta$len is one of the important parts in Laser Scanning Unit because it affects on the optical performance of Laser Scanning Unit dominantly. It is necessary to find out the relationship between the surface profile error of f-$\theta$lens and the beam profile focusing on the Organic Photo Conductive drum in order to analysis the beam profile problems such as appearance of side lobe and expansion of center lobe. In this research, a simulation process which relates the surface profile characteristics to the beam profile has been developed by CODE V. The simulated beam profile also have been compared with the measurement results.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.51-51
• /
• 2004

렌즈는 광학제품의 성능에 직접적인 영향을 미치는 주요 부품으로서, 고정도의 형상 및 안정된 내부물성을 요구하는 정밀 부품이다. 광학 렌즈는 특정 광학계 내에서 입사광이 원하는 위치에 초점을 맺을 수 있도록 굴절시켜주는 역할을 하며, 이를 위해 초점거리, 배율, 렌즈의 성능 등을 종합적으로 고려하여 렌즈의 형상을 설계해야 한다. 이러한 설계과정은 기하광학에 기반한 광선추적(Ray tracing) 기법을 통해 이루어지며, 주로 CodeV, OSLO 등의 상용 광학계설계 소프트웨어를 사용하여 수행되고 있다.(중략)

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.115-118
• /
• 2002

The purpose of this paper is to design a pick-up for the small form factor optical disk drive and to fabricate a micro-compensatory lens for the pick-up using the micro-compression molding process. At design stage, the optical elements including the objective lens and the compensatory lens are miniaturized. The height of pick-up and free working distance are designed as 2mm and 0.2% respectively. To analyze the fabricated micro-compensatory lens, the system was analyzed using the surface profile of the fabricated micro-compensatory lens and CODE V which is commercial software. The RMS wave front aberration of the system using fabricated micro-compensatory lens is 0.01677λ which is lower than Marechal's criterion, 0.07λ.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.376-376
• /
• 2012

본 연구는 Poly-Si에 이온 주입된 Boron의 Activation 거동을 연구하고자 SLS (Sequential Lateral Solidification) Poly-Si과 ELA (Excimer Laser Annealing) Poly-Si의 활성화 거동을 비교 분석하였다. SLS 및 ELA 결정화 방법으로 제조된 Poly-Si을 모재로 비 질량 분리 방식의 ISD (Ion Shower Doping) System을 사용하여 2.5~7.0 kV까지 이온주입 하였다. 이온주입 후 두 가지의 열처리 방법, 즉, FA 열처리(Furnace Annealing)와 RTA 열처리(Rapid Thermal Annealing)를 사용하여 도펀트 활성화 열처리를 수행하고 이온주입 조건 및 활성화 열처리 방법에 따른 결함 회복 및 도펀트 활성화 거동의 변화를 관찰하였다. TRIM-code Simulation 결과 가속 이온 에너지와 조사량이 증가 할수록 이온주입 시 발생하는 결함의 양이 증가하는 것을 정량적으로 계산하였다. 실험 결과 결함의 양이 증가 할수록 Activation이 잘되는 것을 관찰할 수 있었다. SLS Poly-Si에 비하여 ELA Poly-Si의 경우 도펀트 활성화 열처리 후 활성화 효율이 높게 나타났다. 본 결과는 Grain Boundary의 역할과 밀접한 관계가 있으며 간단한 정성적인 Model을 제시하였다. 활성화 효율의 경우 RTA 열처리 시편이 FA 시편에 비하여 높은 것이 관찰되었다. 본 결과는 열처리 온도 및 시간에 따라 변화하는 Boron의 특이한 활성화 거동인 Reverse Annealing 효과에 기인하는 것으로 규명되었다.

• The Bulletin of The Korean Astronomical Society
• /
• v.36 no.2
• /
• pp.146.2-146.2
• /
• 2011

In this study, we have derived the abundances of several elements ? Na, Mg, Al, Si, Ca, Sc, Ti, V, Cr, Mn, Co, Ni - for the six F G K type stars in IC 2391 and the seven stars in NGC 6475. The spectra of those stars are taken from UVES POP archive data, of which resolution is 80,000. To derive the abundances of those elements, TAME (Tools for Automatic Measurement of Equivalent-widths), Kurucz stellar atmospheric model, and MOOG code are used. The stellar parameters (effective temperature, log g, metallicity, microturbulent velocity) are determined from the iron lines. The results provide the abundance differences of chemical elements between two open clusters, IC 2391 (a member of Gould Belt) and NGC 6475 (non-member of it), which would lead to better understanding about Gould Belt.

• Journal of ILASS-Korea
• /
• v.15 no.1
• /
• pp.8-16
• /
• 2010

This paper present the diesel spray characteristics at different injection system parameters in a HSDI diesel engine. The spray characteristics was calculated by the coupled simulation of fuel injection system model and three-dimensional KIVA-3V code with TAB spray model. The relevant injection parameters are accumulator volume, control chamber initial volume, control orifice diameter, needle valve diameter and nozzle chamber initial volume, etc. Parametric investigation with respect to twelve relevant injection parameters showed that there was a significant advantage in varying control chamber initial volume, control chamber orifice diameter, and nozzle chamber orifice diameter with respect to effect the SMD and fuel injection speed. Consequently, in order to design the fuel injection system for spray characteristics, it seems reasonable to suppose to be optimized the fuel injection system.

• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2006.05a
• /
• pp.139-144
• /
• 2006

일반적인 PDP 에 적용된 ADS 방식에서 Reset 파형은 ON/OFF Cell 을 초기화 시켜주고 Wall charge를 쌓아줌으로써 낮은 Address 전압으로도 구동을 가능하게 해준다. 기존의 Reset 파형은 Positive ramp pulse를 이용하여 구현하고 있으나 본 논문은 Negative ramp pulse가 적용된 새로운 Reset 파형을 제안하고자 한다. 2-Dimensional fluid simulation code를 이용하여 Ramp부분에 초점을 맞춰 Reset파형을 분석했으며 제안된 Negative ramp reset 파형은 기존의 Positive ramp reset 파형보다 70V가 낮은 전압에서 방전이 발생되는 것을 확인했다. Negative ramp pulse를 적용됐을 경우, Positive ion들이 모두 Negative ramp pulse가 인가된 Scan전극으로 모이는 현상 때문에 기존 Reset파형에 의한 방전일 때보다 낮은 전압에서의 초기방전을 발생시키므로 Reset에 소요되는 시간과 전압을 감소시킬 수 있다.