• 제목/요약/키워드: CODE V

검색결과 736건 처리시간 0.025초

Selective Laser Melting 방식으로 적층제조된 Inconel 718 합금의 조사 경화 특성 (Irradiation Hardening Property of Inconel 718 Alloy produced by Selective Laser Melting)

  • 서주원;임상엽;진형하;천영범;강석훈;한흥남
    • 한국분말재료학회지
    • /
    • 제30권5호
    • /
    • pp.431-435
    • /
    • 2023
  • An irradiation hardening of Inconel 718 produced by selective laser melting (SLM) was studied based on the microstructural observation and mechanical behavior. Ion irradiation for emulating neutron irradiation has been proposed owing to advantages such as low radiation emission and short experimental periods. To prevent softening caused by the dissolution of γ' and γ" precipitates due to irradiation, only solution annealing (SA) was performed. SLM SA Inconel 718 specimen was ion irradiated to demonstrate the difference in microstructure and mechanical properties between the irradiated and non-irradiated specimens. After exposing specimens to Fe3+ ions irradiation up to 100 dpa (displacement per atom) at an ambient temperature, the hardness of irradiated specimens was measured by nano-indentation as a function of depth. The depth distribution profile of Fe3+ and dpa were calculated by the Monte Carlo SRIM (Stopping and Range of Ions in Matter)-2013 code under the assumption of the displacement threshold energy of 40 eV. A transmission electron microscope was utilized to observe the formation of irradiation defects such as dislocation loops. This study reveals that the Frank partial dislocation loops induce irradiation hardening of SLM SA Inconel 718 specimens.

Using an appropriate rotation-based criterion to account for torsional irregularity in reinforced concrete buildings

  • Akshara S P;M Abdul Akbar;T M Madhavan Pillai;Rakesh Pasunuti;Renil Sabhadiya
    • Earthquakes and Structures
    • /
    • 제26권5호
    • /
    • pp.349-361
    • /
    • 2024
  • Excessive torsional behaviour is one of the major reasons for failure of buildings, as inferred from past earthquakes. Numerous seismic codes across the world specify a displacement-based or drift-based criterion for classifying buildings as torsionally irregular. In recent years, quite a few researchers have pointed out some of the inherent deficiencies associated with the current codal guidelines on torsional irregularity. This short communication paper aims to envisage the need for a revision of the displacement-based guidelines on torsional irregularity, and further highlight the appropriateness of a rotation-based criterion. A set of 6 reinforced concrete building models with asymmetric shear walls are analysed using ETABS v18.0.2, by varying the number of stories from 1 to 9, and the torsional irregularity coefficient of various stories is calculated using the displacement-based formula. Since rotation about the vertical axis is a direct indication of the twist experienced by a building, the calculated torsional irregularity coefficients of all stories are compared with the corresponding floor rotations. The conflicting results obtained for the torsional irregularity coefficients are projected through five categories, namely mismatch with floor rotations, inconsistency in trend, lack of clarity in incorporation of negative values, sensitivity to low values of displacement and error conceived in the mathematical formulation. The findings indicate that the irregularity coefficient does not accurately represent the torsional behaviour of buildings in a realistic sense. The Indian seismic code-based values of 1.2 and 1.4, which are used to characterize buildings as torsionally irregular are observed to be highly sensitive to the numerical values of displacements, rather than the actual degree of rotation. The study thus emphasizes the revision of current guidelines based on a more relevant rotation-based or eccentricity-based approach.

Radiation attenuation and elemental composition of locally available ceramic tiles as potential radiation shielding materials for diagnostic X-ray rooms

  • Mohd Aizuddin Zakaria;Mohammad Khairul Azhar Abdul Razab;Mohd Zulfadli Adenan;Muhammad Zabidi Ahmad;Suffian Mohamad Tajudin;Damilola Oluwafemi Samson;Mohd Zahri Abdul Aziz
    • Nuclear Engineering and Technology
    • /
    • 제56권1호
    • /
    • pp.301-308
    • /
    • 2024
  • Ceramic materials are being explored as alternatives to toxic lead sheets for radiation shielding due to their favorable properties like durability, thermal stability, and aesthetic appeal. However, crafting effective ceramics for radiation shielding entails complex processes, raising production costs. To investigate local viability, this study evaluated Malaysian ceramic tiles for shielding in diagnostic X-ray rooms. Different ceramics in terms of density and thickness were selected from local manufacturers. Energy Dispersive X-ray Fluorescence (EDXRF) and X-ray Fluorescence (XRF) characterized ceramic compositions, while Monte Carlo Particle and Heavy Ion Transport code System (MC PHITS) simulations determined Linear Attenuation Coefficient (LAC), Half-value Layer (HVL), Mass Attenuation Coefficient (MAC), and Mean Free Path (MFP) within the 40-150 kV energy range. Comparative analysis between MC PHITS simulations and real setups was conducted. The C3-S9 ceramic sample, known for homogeneous full-color structure, showcased superior shielding attributes, attributed to its high density and iron content. Notably, energy levels considerably impacted radiation penetration. Overall, C3-S9 demonstrated strong shielding performance, underlining Malaysia's potential ceramic tile resources for X-ray room radiation shielding.

주야 관측경용 빔 분리프리즘을 위한 1× Optical Path Relay Adapter 설계 (Design of 1× Optical Path Relay Adapter for Beam Splitting Prism used in Day & Night Scope)

  • 이동희;최규정;정인;박승환
    • 한국안광학회지
    • /
    • 제17권4호
    • /
    • pp.441-447
    • /
    • 2012
  • 목적: 본 연구는 주야 관측경에 사용되는 빔 분리프리즘용 $1{\times}$ 광로 연장 어댑터(optical path relay adapter) 설계 개발에 관한 것이다. 방법: 상용 C-mount 경통구조를 가지는 줌렌즈 광학계와 빔 분리프리즘을 사용하여 주간 야간용 관측경을 만들기 위해서는 줌렌즈 광학계의 상의 크기는 변하지 않으면서 결상면의 위치를 길게 늘일 수 있는 광로 연장 어댑터가 필요하다. 이에 우리는 lens module 모드를 사용할 수 있는 CodeV 프로그램을 이용하여 $1{\times}$ 광로 연장 어댑터를 설계할 수 있었다. 결과: 우리는 빔 분리 프리즘을 갖는 주야 관측경용 광로 연장 어댑터를 설계 할 수 있었는데, 이 광학계는 EFL이 -Q56.0 mm, 배율이 +1.0배, 첫 번째 렌즈에서 마지막 렌즈까지의 거리가 약 20.4 mm인 특징을 갖는 광학계가 되었다. 이 시스템의 분해능은 40% MTF 값 기준으로 30 lp/mm인 특성을 보여준다. 이 특성은 설계되어진 광로 연장 어댑터는 3세대 영상증폭관(IIT: image intesifier tubes)의 분해능을 충분히 수용할 수 있는 광학계임을 보여준다. 결론: 30 lp/mm에서 MTF 40%인 성능을 가지면서, 첫 번째 렌즈에서 마지막 렌즈까지의 거리가 20.4 mm, EFL이 -Q56.0 mm, 배율이+1.0인 광학적 특성을 갖는 광로 연장 어댑터를 설계하여 적용함으로써 우리는 상용 C-mount 결상 경통구조를 가지는 줌렌즈 광학계와 3세대 영상증폭관(IIT)과 빔 분리프리즘으로 이루어진 새로운 형태의 주야 관측경을 개발할 수 있었다.

AMOLED 컬럼 구동회로 응용을 위한 시분할 기법 기반의 면적 효율적인 10b DAC (An Area-Efficient Time-Shared 10b DAC for AMOLED Column Driver IC Applications)

  • 김원강;안태지;이승훈
    • 전자공학회논문지
    • /
    • 제53권5호
    • /
    • pp.87-97
    • /
    • 2016
  • 본 논문에서는 시분할 기법을 적용하여 AMOLED 컬럼 구동회로용 DAC의 유효 채널 면적을 최소화한 2단 저항 열 기반의 10비트 DAC를 제안한다. 제안하는 DAC는 시분할 기법 기반의 DEMUX, 6비트 및 4비트의 2단 저항 열 구조를 기반으로 하는 롬 구조의 디코더를 2단계로 사용하여 기존의 디스플레이용 DAC보다 빠른 변환속도를 가지는 동시에 하나의 패널 컬럼 구동을 위한 DAC의 유효 면적을 최소화하였다. 두 번째 단 4비트 저항 열에서는 DAC 채널의 면적과 부하 영향을 줄이는 동시에 버퍼 증폭기로 인한 채널 간 오프셋 부정합을 제거하기 위해 기존의 단위-이득 버퍼 대신 간단한 구조의 전류원으로 대체하였다. 제안하는 1:24 DEMUX는 하나의 클록과 5비트 2진 카운터만을 사용하여, 하나의 DAC 채널이 24개의 컬럼을 순차적으로 구동할 수 있도록 하였다. 각 디스플레이 컬럼을 구동하는 출력 버퍼 입력 단에는 0.9pF의 샘플링 커패시터와 작은 크기의 source follower를 추가하여 top-plate 샘플링 구조를 사용하면서 채널 전하 주입에 의한 영향을 최소화하는 동시에 출력 버퍼의 신호정착 정확도를 향상시켰다. 제안하는 DAC는 $0.18{\mu}m$ CMOS 공정으로 제작하였으며, DAC 출력의 정착 시간은 입력을 '$000_{16}$'에서 '$3FF_{16}$'으로 인가했을 때 62.5ns의 수준을 보인다. 제안하는 DAC 단위 채널의 면적 및 유효 채널 면적은 각각 $0.058mm^2$$0.002mm^2$이며, 3.3V의 아날로그 및 1.8V의 디지털 전원 전압에서 6.08mW의 전력을 소모한다.

수리역학적연계 3차원 입자유동코드를 사용한 유체주입에 의한 단층변형 모델링: DECOVALEX-2019 Task B (Modelling of Fault Deformation Induced by Fluid Injection using Hydro-Mechanical Coupled 3D Particle Flow Code: DECOVALEX-2019 Task B)

  • 윤정석
    • 터널과지하공간
    • /
    • 제30권4호
    • /
    • pp.320-334
    • /
    • 2020
  • 본 수치해석연구에서는 국제공동연구프로젝트 DECOVALEX2019의 Task B의 일환으로 PFC3D를 기반으로한 수리역학연계모델을 개발하여 스위스 Mont Terri 지하연구시설에서 수행된 단층의 유체주입으로 인한 슬립시험을 모사하였다. 이를통해, 개발한 PFC3D 수리역학연계모델이 가진 한계점과 향후 보완할 점을 검토하고자 하였다. PFC3D를 기반으로한 3차원 입자결합모델 내 공극-유동통로모델을 생성하였으며 이를 사용하여 Mont Terri Step 2 단층내 유체주입실험을 모사하였다. 모델링결과 단층대를 따라 주입유체의 유동에 의한 단층대의 변형을 확인하였지만, 관측정에서의 시간에 따른 수압변화는 현장측정치와 부분적으로 일치하는 경향을 확인하였다. 현장측정 관측수압은 초기 유체주입 압력증가에 거의 변화를 보이지 않고 주입수압이 최대치에 도달할때쯤 급격한 증가를 보이는반면, 모델링에서는 주입압력이 증가함에 따라 관측수압도 부드럽게 증가하는 경향을 보였다. 이러한 부분적으로 일치하는 결과의 원인으로는 Mont Terri 현장의 단층을 모사하는 방법에 기인하는 것으로 판단하다. PFC3D에서는 단층을 손상대와 코어균열의 조합으로 모사하였고 단층대의 두께가 약 2 m로 주입유체가 단층대를 통해 유동하도록 모사하였기에 현장에서의 주입유체의 단층내 유동보다 그 유동범위가 크게 모사되었다고 판단한다. 또한, 현장단층에서와 같이 단층내부에 존재하는 충진물질로 인해 단층내 수리유동이 제한되어 국부적으로 과잉공급수압이 형성될 수 있는 기재를 모사하지 못한 점 또한 모델링 결과와 현장측정결과가 부분적으로 일치하는 원인일 수 있다. 단층변형의 경우는 모델링결과와 현장측정결과 유사한 수준으로 일치하는 결과를 확인하였다. 수치모델을 변형하여 단층대의 두께를 감소시키고 단층내 충진 물질의 비균질적인분포를 모사할 수 있는 방법론에 대한 후속 연구를 통해 PFC3D 수리역학연계모델의 유체주입으로 인한 단층활성화 연구로의 적용성을 향상시키는 것을 제안하고 한다.

붕소-중성자 포획치료를 위한 미세 속중성자 선량 특성 연구 (Dosimetry of the Low Fluence Fast Neutron Beams for Boron Neutron Capture Therapy)

  • 이동한;지영훈;이동훈;박현주;이석;이경후;서소희;김미숙;조철구;류성렬;유형준;곽호신;이창훈
    • Radiation Oncology Journal
    • /
    • 제19권1호
    • /
    • pp.66-73
    • /
    • 2001
  • 목적 : 붕소-중성자 포획치료법(Boron Neutron Capture Therapy, BNCT)을 위해 원자력병원 싸이클로트론에서 발생되는 최대에너지 34.4 MeV의 속중성자(Fast neutron)를 70 cm 파라핀으로 감속시킨 후 선량 특성을 조사하였다. 그 결과를 토대로 열외중성자(Epithermal neutron) 선량 측정법에 대한 프로토콜을 확립하여 원자로에서 방출되는 열외 중성자 선량 특성 평가의 기초를 삼고, 가속기를 이용한 BNCT 연구에 대한 타당성 여부를 조사하고자 한다. 대상 및 방법 : 공기 중 선량 및 물질 내 선량 분포 측정을 위해 Unidos 10005 (PTW, Germany) 전기계와 조직 등가 물질인 A-150 플라스틱으로 제작된 IC-17 (Far West, USA) 및 IC-18, ElC-1 이온함을 사용하였고, 감마선의 측정을 위해서는 마그네슘으로 제작된 IC-l7M 이온함을 이용하였으며 조직등가 기체와 아르곤 기체를 분당 5cc 씩 주입하며 측정하였다. 중성자, 광자, 전자가 혼합된 장의 모의 수송 해석을 위해 이용되는 Monte Carlo N-Particle (MCNP) transport code를 사용하여 2차원적 선량 분포 및 에너지 분포를 계산하였으며 이 결과를 측정값과 비교하였다. 결과 : BNCT에서의 유효 치료 깊이인 물 팬텀 4 cm에서의 선량은 치료기 1 MU 당 $6.47\times10^{-3}\;cGy$로 미세하였으며, 이때 감마 오염도(contamination)는 $65.2{\pm}0.9\%$로 중성자보다는 감마선에 의한 선량 기여분이 우세하였다. 깊이에 따른 선량 분포 특성에서는 중성자 선량은 선형적으로 감쇠 되었고, 감마선량은 지수적으로 보다 급격히 감쇠되는 경향을 보였으며 전체 선량의 $D_{20}/D_{10}$은 0.718 이었다. MCNP에 의한 에너지 분포 전산 계산의 결과 2.87 MeV 이하에서 중성자 피크가 나타났으며, 저에너지 영역에서는 감마선이 연속적으로 분포되는 양상을 보였다. 결론 : 벽 물질이 서로 다른 두 개의 이온함을 사용한 직접 선량 측정과 MCNP 전산 시뮬레이션을 이용한 공간 선량분포 계산으로 미세 속중성자 빔에 대한 선량 특성을 파악할 수 있었으며, 원자로 열외중성자 주(Epithermal neutron column)에 대한 선량 평가 자료로 확보하였다. 아울러 가속기에 대한 연구가 진행되어 고전압, 고전류를 발생시키는 전원 공급장치와 표적핵(Target) 물질이 개발되고 비스무스나 납 등에 의해 감마 오염도를 줄일 경우, 싸이크로트론에 의한 보론-중성자 포획치료도 가능해질 것으로 판단된다.

  • PDF

아시아 주요국가(主要國家)들에 있어서의 바르샤바 체제(體制)의 적용실태(適用實態)와 전망(展望) (The Current Status of the Warsaw Convention and Subsequent Protocols in Leading Asian Countries)

  • 이태희
    • 항공우주정책ㆍ법학회지
    • /
    • 제1권
    • /
    • pp.147-162
    • /
    • 1989
  • The current status of the application and interpretation of the Warsaw Convention and its subsequent Protocols in Asian countries is in its fredgling stages compared to the developed countries of Europe and North America, and there is thus little published information about the various Asian governments' treatment and courts' views of the Warsaw System. Due to that limitation, the accent of this paper will be on Korea and Japan. As one will be aware, the so-called 'Warsaw System' is made up of the Warsaw Convention of 1929, the Hague Protocol of 1955, the Guadalajara Convention of 1961, the Guatemala City Protocol of 1971 and the Montreal Additional Protocols Nos. 1,2,3 and 4 of 1975. Among these instruments, most of the countries in Asia are parties to both the Warsaw Convention and the Hague Protocol. However, the Republic of Korea and Mongolia are parties only to the Hague Protocol, while Burma, Indonesia and Sri Lanka are parties only to the Warsaw Convention. Thailand and Taiwan are not parties only to the convention or protocol. Among Asian states, Indonesia, the Phillipines and Pakistan are also parties to the Guadalajara Convention, but no country in Asia has signed the Guatemala City Protocol of 1971 or the Montreal Additional Protocols, which Protocols have not yet been put into force. The People's Republic of China has declared that the Warsaw Convention shall apply to the entire Chinese territory, including Taiwan. 'The application of the Warsaw Convention to one-way air carriage between a state which is a party only to the Warsaw Convention and a state which is a party only to the Hague Protocol' is of particular importance in Korea as it is a signatory only to the Hague Protocol, but it is involved in a great deal of air transportation to and from the united states, which in turn is a party only to the Warsaw Convention. The opinion of the Supreme Court of Korea appears to be, that parties to the Warsaw Convention were intended to be parties to the Hague Protocol, whether they actually signed it or not. The effect of this decision is that in Korea the United States and Korea will be considered by the courts to be in a treaty relationship, though neither State is a signatory to the same instrument as the other State. The first wrongful death claim in Korea related to international carriage by air under the Convention was made in Hyun-Mo Bang, et al v. Korean Air Lines Co., Ltd. case. In this case, the plaintiffs claimed for damages based upon breach of contract as well as upon tort under the Korean Civil Code. The issue in the case was whether the time limitation provisions of the Convention should be applicable to a claim based in tort as well as to a claim based in contract. The Appellate Court ruled on 29 August 1983 that 'however founded' in Article 24(1) of the Convention should be construed to mean that the Convention should be applicable to the claim regardless of whether the cause of action was based in tort or breach of contract, and that the plaintiffs' rights to damages had therefore extinguished because of the time limitation as set forth in Article 29(1) of the Convention. The difficult and often debated question of what exactly is meant by the words 'such default equivalent to wilful misconduct' in Article 25(1) of the Warsaw Convention, has also been litigated. The Supreme Court of Japan dealt with this issue in the Suzuki Shinjuten Co. v. Northwest Airlines Inc. case. The Supreme Court upheld the Appellate Court's ruling, and decided that 'such default equivalent to wilful misconduct' under Article 25(1) of the Convention was within the meaning of 'gross negligence' under the Japanese Commercial Code. The issue of the convention of the 'franc' into national currencies as provided in Article 22 of the Warsaw Convention as amended by the Hague Protocol has been raised in a court case in Korea, which is now before the District Court of Seoul. In this case, the plaintiff argues that the gold franc equivalent must be converted in Korean Won in accordance with the free market price of gold in Korea, as Korea has not enacted any law, order or regulation prescribing the proper method of calculating the equivalent in its national currency. while it is unclear if the court will accept this position, the last official price of gold of the United States as in the famous Franklin Mint case, Special Drawing Right(SDR) or the current French franc, Korean Air Lines has argued in favor of the last official price of gold of the United States by which the air lines converted such francs into us Dollars in their General Conditions of Carriage. It is my understanding that in India, an appellate court adopted the free market price valuation. There is a report as well saying that if a lawsuit concerning this issue were brought in Pakistan, the free market cost of gold would be applied there too. Speaking specifically about the future of the Warsaw System in Asia though I have been informed that Thailand is actively considering acceding to the Warsaw Convention, the attitudes of most Asian countries' governments towards the Warsaw System are still wnot ell known. There is little evidence that Asian countries are moving to deal concretely with the conversion of the franc into their own local currencies. So too it cannot be said that they are on the move to adhere to the Montreal Additional Protocols Nos. 3 & 4 which attempt to basically solve many of the current problems with the Warsaw System, by adopting the SDR as the unit of currency, by establishing the carrier's absolute liability and an unbreakable limit and by increasing the carrier's passenger limit of liability to SDR 100,000, as well as permiting the domestic introduction of supplemental compensation. To summarize my own sentiments regarding the future, I would say that given the fact that Asian air lines are now world leaders both in overall size and rate of growth, and the fact that both Asian individuals and governments are becoming more and more reliant on the global civil aviation networks as their economies become ever stronger, I am hopeful that Asian nations will henceforth play a bigger role in ensuring the orderly and hasty development of a workable unified system of rules governing international commercial air carriage.

  • PDF

경량 윈도우 관리기를 이용한 퍼스널자바 AWT 구현 (Implementation of PersonalJave™ AWT using Light-weight Window Manager)

  • 김태현;김광영;김형수;성민영;장래혁;신현식
    • 한국정보과학회논문지:컴퓨팅의 실제 및 레터
    • /
    • 제7권3호
    • /
    • pp.240-247
    • /
    • 2001
  • 자바는 플랫폼 독립성, 높은 보안성, 멀티쓰레드 지원 등의 다양한 장점을 가지고 있어서 내장형 시스템을 위한 실행 환경으로 기대를 모으고 있다. 널리 쓰이고 있는 자바 수행 환경 중 하나인 Sun사의 퍼스널자바 ($PersonalJave^{TM}$)는 다양한 GUI를 쉽게 생성할 수 있도록 Truffle이라는 AWT 구조를 제공하고 있어서 셋톱박스나 PDA 등의 다양한 내장형 시스템에 활발히 이식되고 있다. 기본적으로 Truffle은 기존의 마이크로소프트 Win32 API나 X 윈도우 API를 기반으로 하고 있다. 그러나, 이러한 윈도우 관리기들은 많은 양의 디스크나 메모리 공간을 요구하므로 시스템 자원이 한정된 내장형 시스템에는 적합하지 않다. 본 연구에서는 내장형 시스템의 요구조건을 만족시킬 수 있도록 내장형 리눅스 상에서 경량 윈도우 관리기인 마이크로윈도우즈(Microwindows)를 플랫폼 그래픽 시스템으로 채택하고 퍼스널자바 AWT API를 구현하였다. 마이크로윈도우즈(Microwindows)는 경량이면서도 기존의 윈도우 관리기들과 유사한 기능을 제공하며, 별도의 그래픽 시스템 지원을 필요로 하지 않아서 다양한 플랫폼 상에 쉽게 이식될 수 있다. 또한, 소스 코드가 공개되어 있어서 응용에 따라 수정 및 확장이 용이하다. 본 연구에서는 내장형 리눅스 상에서 동작하는 마이크로윈도우즈를 이용하여 퍼스널자바 AWT를 구현하였으며 다양한 응용프로그램을 이용하여 그 효용성을 입증하였다.

  • PDF

한국의 적설하중 기준에 대한 평가 및 개선방안 (Assessment and Improvement of Snow Load Codes and Standards in Korea)

  • 유인상;김하룡;;정상만
    • 대한토목학회논문집
    • /
    • 제34권5호
    • /
    • pp.1421-1433
    • /
    • 2014
  • 본 연구에서는 적설심 빈도분석을 수행하기 위해 우리나라에 가장 적합한 확률분포형과 모수추정방법을 선정하였다. 최적확률분포형으로는 Generalized Extreme Value (GEV), 모수추정방법으로는 확률가중모멘트법이 선정되었다. 선정된 확률분포형과 모수추정방법을 적용하여 우리나라 69개 기상관측소별 적설심 빈도분석을 수행하였다. 빈도분석을 통해 관측소별 빈도별 적설심을 산정하였고 적설심과 눈의 단위중량을 이용하여 적설하중을 산정하였다. 산정된 적설하중 중 100년 빈도 적설하중을 이용하여 ArcGIS 크리깅(Kriging) 기법을 통해 우리나라 설계적설하중 지도를 작성하였다. 또한, 본 연구를 통해 산정된 적설하중과 건축구조기준 및 해설(2009)에서 제시하고 있는 설계적설하중을 비교하여 설계적설하중 기준의 적정성을 평가하였다. 평가결과, 대부분의 지역에서 현재 지상적설하중 기준의 상향조정이 요구되었으며 본 연구를 통해 도출된 결과를 반영하여 보다 합리적인 지역별 설계적설하중을 제안하였다. 본 연구를 통해 제안된 지역별 설계적설하중은 폭설에 대비한 우리나라 전역의 구조물 설계에 활용될 수 있을 것으로 기대된다.