• Journal of Astronomy and Space Sciences
• /
• 제19권4호
• /
• pp.263-272
• /
• 2002

보현산 천문대의 1.8m 망원경을 이용하여 1999년 10월 19일부터 21일까지 총 3일간 W UMa형 접촉쌍성 V523 Cas를 CCD 측광관측하여 총 616 (308의 ${\Delta}$b점, 308의 ${\Delta}$v점) 개의 관측점을 얻었다. 우리의 관측점으로부터 4개의 새로운 극심시각(주극심 2개, 부극심 2개)을 산출하였다. 우리가 얻은 BV 광도곡선과 Milone et al.(1985)의 시선속도곡선을 Wilson-Devinney(WD) 방법으로 흑점이 있는 경우와 없는 경우로 나누어 광도곡선의 해를 산출하였다.

• 한국지진공학회논문집
• /
• 제11권4호
• /
• pp.65-77
• /
• 2007

Site response analyses were performed based on equivalent linear technique using shear wave velocity profiles of 162 sites collected around the Korean peninsula. The site characteristics, particularly the shear wave velocities and the depth to the bedrock, are compared to those in the western United States. The results show that the site-response coefficients based on the mean shear velocity of the top 30m ($V_{S30}$) suggested in the current code underestimates the motion in short-period ranges and overestimates the motion in mid-period ranges. The current Korean code based on UBC is required to be modified considering site characteristics in Korea for the reliable estimation of site amplification. From the results of numerical estimations, new regression curves were derived between site coefficients ($F_{a}\;and\;F_{v}$) and the fundamental site periods, and site coefficients were grouped based on site periods with reasonable standard deviations compared to site classification based on $V_{S30}$. Finally, new site classification system and modification of design response spectra are recommended considering geotechnical characteristics in Korea.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 지반공학 공동 학술발표회
• /
• pp.154-162
• /
• 2005

In this paper, site response analyses were performed based on equivalent linear technique using the shear wave velocity profiles of 162 sites collected around the Korean peninsula. The site characteristics, particularly the shear wave velocities and the depth to the bedrock, are compared to those in the western United States. The results show that the site-response coefficients based on the mean shear velocity of the top 30m ($V_{S30}$) suggested in the current code underestimates the motion in short-period ranges and overestimates the motion in mid-period ranges. Also the current Korean code based on UBC is required to be modified considering site characteristics in Korea for the reliable estimation of site amplification. From the results of numerical estimations, new regression curves were derived between site coefficients ($F_a$ and $F_v$) and the fundamental site periods, and site coefficients were grouped based on site periods in the regions of shallow bedrock. The standard deviations of the proposed method was reasonable compared to site classification based on $V_{S30}$. Finally, new site classification system is recommended based on site periods for regions of shallow bedrock depth in Korea.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.654-659
• /
• 2003

PVAP (Pressure Vessel Analysis Program V1.0) was developed by adopting the finite element analysis program ANSYS V6.0, and Microsoft Visual Basic V6.0 was also utilized for the interfacing and handling of input and output data during the analysis. PVAP offers the end user the ability to design and analyze vessels in strict accordance with ASME Section VIII, Division 2. More importantly, the user is not required to make any design decisions during the input of the vessel. PVAP consists of three analysis modules for the finite element analysis of the primary components of pressure vessel such as head, shell, nozzle, and skirt. In each module, finite element analysis can be performed automatically only if the end user gives the dimension of the vessel. Furthermore, the calculated results are compared and evaluated in accordance with the criteria given in ASME Boiler and Pressure Vessel Code, Section VIII, Division 2. In particular, heat transfer analysis and consecutive thermal stress analysis for the junction between skirt and head can be carried out automatically in the skirt-tohead module. Finally, report including the above results is created automatically in Microsoft Word format.

• 한국분무공학회지
• /
• 제21권1호
• /
• pp.47-52
• /
• 2016

This paper describes the modeling of CNG direct injection using gaseous sphere injection model. Simulation of CNG direct injection does not need break up and evaporation model compared to that of liquid fuel injection. And very fine mesh is needed near the injector nozzle to resolve the inflow boundary. Therefore it takes long computation time for gaseous fuel injection simulation. However, simulation of CNG direct injection could be performed with the coarse mesh using gaseous sphere injection model. This model was integrated in KIVA-3V code and RNG $k-{\varepsilon}$ turbulence model needs to be modified because this model tends to over-predict gas jet diffusion. Furthermore, we preformed experiments of gaseous fuel injection using PLIF (planar laser induced fluorescence)method. Gaseous fuel injection model was validated against experiment data. The simulation results agreed well with the experiment results. Therefore gaseous sphere injection model has the reliability about gaseous fuel direct injection. And this model was predicted well a general tendency of gaseous fuel injection.

• 한국자동차공학회논문집
• /
• 제20권1호
• /
• pp.39-45
• /
• 2012

In the standard CFD code, Lagrangian-Eulerian method is very popular to simulate the liquid spray penetrating into gaseous phase. Though this method can give a simple solution and low computational cost, it have been reported that the Lagrangian spray models have numerical grid dependency, resulting in serious numerical errors. Many researches have shown the grid dependency arise from two sources. The first is due to unaccurate prediction of the droplet-gas relative velocity, and the second is that the probability of binary droplet collision is dependent on the grid resolution. In order to solve the grid dependency problem, the improved spray models are implemented in the KIVA-3V code in this study. For reducing the errors in predicting the relative velocity, the momentum gain from the gaseous phase to liquid particles were resolved according to the gas-jet theory. In addition, the advanced algorithm of the droplet collision modeling which surmounts the grid dependency problem was applied. Then, in order to validate the improved spray model, the computation is compared to the experimental results. By simultaneously regarding the momentum coupling and the droplet collision modeling, successful reduction of the numerical grid dependency could be accomplished in the simulation of the high-pressure injection diesel spray.

• 한국광학회지
• /
• 제22권5호
• /
• pp.239-244
• /
• 2011

본 논문에서는 LCD 디스플레이용 색채계 렌즈에 관해 근축광학적인 방법에 의한 비결상 광학설계를 소개한다. 색채계란 디스플레이 상의 측정영역으로부터 방출된 광을 빛의 3원색인 빨강, 녹색, 초록으로 분해하는 측정기기로써, 결상렌즈가 아닌 집광렌즈를 필요로 한다. 집광렌즈는 비결상 렌즈이고 측정영역과 감지영역 간의 특정한 압축비 조건을 만족해야 한다. 총체적인 비결상 광학조건을 이해하기 위해, 근축광학을 사용하여 필요충분조건을 해석적인 표현식으로 유도하였고, 나아가 간단한 공식으로 발전시켰다. 이 공식의 타당성은 CODE V와 Light-Tools를 사용하여 검증하였다. 이 공식은 색채계용 집광렌즈 뿐만 아니라, 레이저 빔의 세기를 균일하게 만들기 위한 어레이 렌즈의 설계에도 유용하게 확장 적용될 수 있다.

• 한국안광학회지
• /
• 제8권1호
• /
• pp.35-39
• /
• 2003

본 연구는 안과 실명 질환의 가장 많은 부분을 차지하는 망막을 실시간으로 3차원 영상화하기 위한 장치의 광학설계에 관한 것이다. 3차원 망막 영상을 얻기 위해 광원으로 He-Ne 레이저를 사용하였으며, 이는 초점 조절을 위한 슬래지부, 안구의 망막을 스캔하는 2차원 평면 주사선을 위한 scan system부, 그리고 망막에서 반사되어 나오는 반사 선을 센서로 보내주기 위한 반사 광학계부로 구성되어 있다. 구성된 시스템들은 레이저빔의 입사각과, 망막으로부터 반사되는 레이저 반사 가상선의 출사각을 일정하게 유지하게 했으며, 또한 망막에서 레이저빔의 입사와 반사가상선의 출사가 수직 및 수평 방향으로 일치시키도록 하였다. 이렇게 구성되어진 각 부운을 광학설계 프로그램인 Code-V를 이용하여 설계하였고, 최적화하였다. 결론적으로 3차원 망막 영상을 얻기 위한 장치의 최적 시스템을 다시 구성 하기전, 해상력이 높은 망막의 영상을 얻을 수 있는 광학장치를 구성하기 위하여 광학설계 프로그램인 Code-V를 이용하여 초기설계를 하고 최적화를 하였다. 그 결과 광학 수차가 적고 높은 해상력을 갖는 광학 시스템을 구현할 수 있는 광학적 데이터를 얻을 수 있었다.

• Structural Engineering and Mechanics
• /
• 제37권4호
• /
• pp.385-399
• /
• 2011

The aim of this research is to model the behaviour of recently developed high force to volume (HF2V) passive energy dissipation devices using a simple finite element (FE) model. Thus, the end result will be suitable for use in a standard FE code to enable computationally fast and efficient analysis and design. Two models are developed. First, a detailed axial model that models an experimental setup is created to validate the approach versus experimental results. Second, a computationally and geometrically simpler equivalent rotational hinge element model is presented. Both models are created in ABAQUS, a standard nonlinear FE code. The elastic, plastic and damping properties of the elements used to model the HF2V devices are based on results from a series of quasi-static force-displacement loops and velocity based tests of these HF2V devices. Comparison of the FE model results with the experimental results from a half scale steel beam-column sub-assembly are within 10% error. The rotational model matches the output of the more complex and computationally expensive axial element model. The simpler model will allow computationally efficient non-linear analysis of large structures with many degrees of freedom, while the more complex and physically accurate axial model will allow detailed analysis of joint connection architecture. Their high correlation to experimental results helps better guarantee the fidelity of the results of such investigations.

• Journal of Radiation Protection and Research
• /
• 제41권4호
• /
• pp.344-349
• /
• 2016

Background: Carbon ion therapy has achieved satisfactory results. However, patients have a risk to get a secondary cancer. In order to estimate the risk, it is essential to understand particle transportation and nuclear reactions in the patient's body. The particle transport Monte Carlo simulation code is a useful tool to understand them. Since the code validation for heavy ion incident reactions is not enough, the experimental data of the elementary reaction processes are needed. Materials and Methods: We measured neutron production double-differential cross-sections (DDXs) on a carbon bombarded with 430 MeV/nucleon carbon beam at PH2 beam line of HIMAC facility in NIRS. Neutrons produced in the target were measured with NE213 liquid organic scintillators located at six angles of 15, 30, 45, 60, 75, and $90^{\circ}$. Results and Discussion: Neutron production double-differential cross-sections for carbon bombarded with 430 MeV/nucleon carbon ions were measured by the time-of-flight method with NE213 liquid organic scintillators at six angles of 15, 30, 45, 60, 75, and $90^{\circ}$. The cross sections were obtained from 1 MeV to several hundred MeV. The experimental data were compared with calculated results obtained by Monte Carlo simulation codes PHITS, Geant4, and FLUKA. Conclusion: PHITS was able to reproduce neutron production for elementary processes of carbon-carbon reaction precisely the best of three codes.