• 한국생산제조학회지
• /
• 제23권6호
• /
• pp.609-617
• /
• 2014

We have studied a chip-on-board LED lighting optical system for various luminous-intensity-distribution angles of the LED. An optical system that can accept different LEDs was made to reduce the systems's weight and size as we selected the chip-on-board LED, which is easy to apply to optical systems, unlike existing package-on-board LEDs. The luminous-intensity-distribution angles were $45^{\circ}$, $60^{\circ}$, $90^{\circ}$, and $120^{\circ}$. We researched these four types of optical systems. The $45^{\circ}$ and $60^{\circ}$ units were developed into reflectors, and the $90^{\circ}$ and $120^{\circ}$ units, into lenses. We checked the performance of the designed optical system through simulation and made a mock-up. Then we made a prototype of the chip-on-board LED high bay for use with the mock-up. After measuring its performance, we tested the luminous-intensity-distribution angles and compared them with simulation data. The resulting prototype was developed considering brightness, light uniformity, age, and economics which are suitable for a factory environment.

• 한국작물학회지
• /
• 제40권3호
• /
• pp.334-339
• /
• 1995

옥수수의 육성과정이나 교잡종 생산시에 암술봉투를 씌우기 전에 상부이삭이 출사하는 경우에는 출사한 개체를 버리지 않고 출사한 이삭을 제거하면 하부이삭이 발육하므로 종자 생산을 기대 할 수 있다. 본 실험은 7개의 자식계통을 공시하여 출사된 상부이삭의 제거가 하부이삭의 개화와 종자생산에 대한 반응을 검토하고자 실시하였으며 그 결과를 요약하면 다음과 같다. 1. 상부이삭을 제거하였을 때 하부이삭의 출사기는 상부이삭보다 4일 정도 지연되었으며 자식계통간에 차이가 있었다. 2. 하부이삭의 적장은 상부이삭에 비하여 평균 36% 정도 짧았으며, 자식계통 NC246은 하부 이삭이 발육출사되지 않아 자식계통간의 차이를 나타냈다. 3. 하부이삭의 이삭열수와 열당립수는 각각 28%, 37% 적었고 수당립수는 43% 적었으며. 자식계통간의 감소 범위는 0∼82% 이었다. 4. 수양구성 요소중에서 100입중의 감소 정도가 가장 적었고, 수장과 수양구성 요소에 대한 변리계수는 상부이삭에 비하여 하부이삭에서 약 2배 정도 컸다.

• 한국광학회지
• /
• 제31권2호
• /
• pp.81-87
• /
• 2020

본 연구에서는 좁은 지향각, 높은 최대 중심광도를 갖는 탐조등 광학계 설계 기술 연구를 진행하였다. 기존 탐조등 광원인 할로겐램프와 제논램프는 진동과 충격에 취약하며, 크기가 크고 무거워 운반에 많은 어려움이 있다. 또한 탐조등 후면부에 위치한 포물경은 제작 시 광원과 조립 오차에 따른 성능 저하와 낮은 광 효율의 단점을 지니고 있다. 이를 해결하기 위해 본 논문에서는 1 kW 할로겐램프를 150 W급 고출력 COB LED로 대체하고 목표 성능을 만족하기 위한 고효율 TIR 렌즈를 설계하였다. 이후 광학계 사출 시 발생하는 표면 오차를 해결하는 방안으로 TIR 렌즈 어레이를 제시하여 제작 신뢰성을 확보하였다. 설계된 광학계를 바탕으로 시제품을 제작한 후 시중 할로겐램프 탐조등과 성능을 비교하여 광학 성능의 우수함을 확인하였다.

• Geomechanics and Engineering
• /
• 제19권2호
• /
• pp.153-165
• /
• 2019

A case study of monitoring and analysis of surface settlement induced by tunneling of Tabriz metro line 2 (TML2) is presented in this paper. The TML2 single tunnel has been excavated using earth pressure balanced TBM with a cutting-wheel diameter of 9.49 m since 2015. Presented measurements of surface settlements, were collected during the construction of western part of the project (between west depot and S02 station) where the tunnel was being excavated in sand and silt, below the water table and at an average axis depth of about 16 m. Settlement readings were back-analyzed using Gaussian formula, both in longitudinal and transversal directions, in order to estimate volume loss and settlement trough width factor. In addition to settlements, face support and tail grouting pressures were monitored, providing a comprehensive description of the EPB performance. Using the gap model, volume loss prediction was carried out. Also, COB empirical method for determination of the face pressure was employed in order to compare with field monitored data. Likewise, FE simulation was used in various sections employing the code Simulia ABAQUS, to investigate the efficiency of numerical modelling for the estimating of the tunneling induced-surface settlements under such a geotechnical condition. In this regard, the main aspects of a mechanized excavation were simulated. For the studied sections, numerical simulation is not capable of reproducing the high values of in-situ-measured surface settlements, applying Mohr-Coulomb constitutive law for soil. Based on results, for the mentioned case study, the range of estimated volume loss mostly varies from 0.2% to 0.7%, having an average value of 0.45%.

• 생태와환경
• /
• 제54권3호
• /
• pp.209-220
• /
• 2021

Pacific herring, Clupea pallasii, a keystone species with significant ecological and commercial importance, is declining globally throughout much of its range. While traditional fishing equipment methods remain limited, new sensitive and rapid detection methods should be developed to monitor fisheries resources. To monitor the presence and quantity of C. pallasii from environmental DNA (eDNA) extracted from seawater samples, a pair of primers and a TaqMan^® probe specific to this fish based on mitochondrial cytochrome b (COB) sequences were designed for the real-time PCR (qPCR) assay. The combination of our molecular markers showed high specificity in the qPCR assay, which affirmed the success of presenting a positive signal only in the C. pallasii specimens. The markers also showed a high sensitivity for detecting C. pallasii genomic DNA in the range of 1 pg~100 ng rxn^-1 and its DNA plasmid containing COB amplicon in the range of 1~100,000copies rxn^-1, which produced linear standard calibration curves (r²=0.99). We performed a qPCR assay for environmental water samples obtained from 29 sampling stations in the southeastern coastal regions of South Korea using molecular markers. The assay successfully detected the C. pallasii eDNA from 14 stations (48.2%), with the highest mean concentration in Jinhae Bay with a value of 76.09±18.39 pg L^-1 (246.20±58.58 copies L^-1). Our preliminary application of molecular monitoring of C. pallasii will provide essential information for efficient ecological control and management of this valuable fisheries resource.

• 식물병연구
• /
• 제29권2호
• /
• pp.137-144
• /
• 2023

Exserohilum turcicum is a fungus that causes northern corn leaf blight (NCLB) and has deleterious effects on maize production globally. Therefore, it is prudent to mitigate the effects of NCLB using genetic diversity. The objective of this research was to assess the severity of NCLB disease on the growth and yield of various maize genotypes. A randomized complete block design field experiment, replicated three times, was conducted to evaluate the effect of E. turcicum on 10 maize hybrids. Percent disease index, plant height, and leaf area were recorded at the silk stage. Cob weight, grain fresh weight, and grain yields were determined at harvest maturity. All measured parameters were significantly different (P<0.05) between the maize hybrids. Of the 10 genotypes, four (PAN 4R-528R, PAN 4R-728BR, PAN 3R-724BR, and P1788BR) were susceptible, five (DKC74-74BR, PAN 5R-582R, PAN 5R-890R, PAN 5R-854R, and PAN 5R-590R) were moderately susceptible, and one (DKC80-40BR) was moderately resistant. DKC80-40BR exhibited greater cob weight, while DKC74-74BR was superior in all other plant growth and yield components. Interestingly, although not significant (P>0.05) and high, maize growth and yield parameters had negative correlations with disease incidence, except for grain fresh weight. Therefore, DKC80-40BR may be selected for cultivation in areas prone to NCLB to reduce maize susceptibility to the disease, while DKC74-74BR may improve crop performance. These hybrids could be considered as potential sources of resistance or tolerance to NCLB for further validation by plant breeders.

• Korean Chemical Engineering Research
• /
• 제61권4호
• /
• pp.591-597
• /
• 2023

Pakistan depends heavily on imports for its fuel requirements. In this experiment, catalytic pyrolysis of a blend of feedstock's consisting of date seed, wheat straw, and corn cob was conducted in a fixed bed reactor to produce oil that can be used as an alternative fuel. The main focus was to emphasize the outcome of important variables on the produced oil. The effects of operating conditions on the yield of bio-oil were studied by changing temperature (350-500 ℃), heating rate (10, 15, 20 ℃/min), and particle size (1, 2, 3 mm). Moreover, ZnO was used as a catalyst in the process. First, the thermal degradation of the feedstock was investigated by TGA and DTG analysis at 10 ℃/min of different particle sizes of 1, 2, and 3mm from a temperature range of 0 to 1000 ℃. The optimum temperature was found to be 450 ℃ for maximum degradation, and the oil yield was indicated to be around 37%. It was deduced from the experiment that the maximum production of bio-oil was 32.21% at a temperature of 450 ℃, a particle size of 1mm, and a heating rate of 15 ℃/min. When using the catalyst under the same operating conditions, the bio-oil production increased to 41.05%. The heating value of the produced oil was 22 MJ/kg compared to low-quality biodiesel oil, which could be used as a fuel.

• 한국환경과학회지
• /
• 제3권4호
• /
• pp.381-391
• /
• 1994

This paper presents the disributions and variations of CO, $CO_2$, number of people and temperature in underground shopping center and subway of Seomyeon and Jagalchi in Pusan, Korea for two times during October and November in 1993, respectively. NDIR analyzer is used for the analysis of CO and $CO_2$. The temperature is obtained from a mercury therometer. The results o( observation and analysis show that the variation of $CO_2$ is strongly related to number of people and temperature. The correlation coefficients between temperature, COB and Number of people are higher than 0. at both of places. The pollution of CO2 of Seomyeon is higher than that of Jagachi in underground shopping center. However, CO is not correlated with the temperature and the Number of people. From the results, we found that the indoor air quality monitoring system is needed for the prevention of the underground air Pollution.

• International Journal of Internet, Broadcasting and Communication
• /
• 제7권2호
• /
• pp.161-167
• /
• 2015

The performance of high power LEDs highly depends on the junction temperature. Operating at high junction temperature causes elevation of the overall thermal resistance which causes degradation of light intensity and lifetime. Thus, appropriate thermal management is critical for LED packaging. The main goal of this research is to improve thermal resistance by optimizing and comparing nano-pore silicon-based thermal substrate to insulated metal substrate and direct bonded copper thermal substrate. The thermal resistance of the packages are evaluated using computation fluid dynamic approach for 1 W single chip LED module.

• 한국생산제조학회지
• /
• 제21권3호
• /
• pp.487-492
• /
• 2012

In this study we researched a spotlight in LED lighting. Ordinary LED spotlight was manufactured with characterized property of traveling straightness of LED light source, but multiple use of shell type LED, a yellow band has formed caused by light source interference between the LED. Also, there was a high miscellaneous light efficiency with losing light source homogeneity and efficiency due to light source control uneasiness. The study uses aspheric reflector and aspheric lens, so we can control the light source of LED spotlight with effectively and we reached surface light source by using COB/COM for LED module. Furthermore it can change its use by a reduced scale of light system. It has been designed to make its various application from low power consumption of bicycle lamp, up to high power consumption of automobile lamps and lighthouse.