• Environmental and Resource Economics Review
• /
• v.22 no.1
• /
• pp.77-98
• /
• 2013

China, the world's largest $CO_2$ producer, is likely to be obligated to reduce greenhouse gas emissions under the post-Kyoto protocol. This paper estimates a Shephard input distance function for the Chinese fossil-fueled power generation sector to measure the shadow price of $CO_2$ emissions, technical efficiency, and indirect Morishima elasticities of substitution between inputs. Empirical results show that, on average, it costs approximately 3.2 US dollars per year to reduce $CO_2$ emissions by one ton over the period 1981-2009. This finding indicates that Chinese power sector is expected to benefit from selling emission permits to other countries such as Korea and Japan, given that our estimate for China is lower than the ones previous literatures estimated for the power sector in these countries. The maximum attainable average $CO_2$ reduction potential amounts to approximately 25 million tons per year by improving technical efficiency. Capital is substitutable with both coal and oil and capital is relatively more readily substituted for these fuels.

• Fire Science and Engineering
• /
• v.34 no.2
• /
• pp.1-6
• /
• 2020

The energy released by various burning material has a wide range of its magnitude and transient characteristics, the measurement of the heat release rate(HRR) has been considered as one of the most challenging issue among the parameters related to fire. This study compares the measured HRR calculated by the oxygen consumption (OC) method and the carbon dioxide generation (CDG) method using a laboratory-scale fire calorimeter. The feasibility of the CDG method is examined by analyzing the relative error. The relationship between the oxygen depletion factor and CO₂ mass flow rate, which is a key parameter in HRR calculations, showed strong linearity at 6 % for the methane burner fire. The contribution of HRR by CO was less than 7% compared with the of HRR by CO₂ in the CDG calculation method. The linearity of the OC and CDG methods with respect to HRR of the referenced methane burner in a quasi-steady state was less than 1%; this indicates that the CDG method can be utilized as a complementary method in heat release rate measurement.

• Journal of Wetlands Research
• /
• v.26 no.2
• /
• pp.182-195
• /
• 2024

Tidal current power generation is a power generation method that produces energy using tidal currents generated by tidal phenomena. Tidal current power generation is a sustainable and regular energy production because tidal phenomenon occurs as long as the earth exists. Many countries are focusing on the development of tidal energy, but there are still concerns about the impact of tidal energy on the marine animals. In the present study, we reviewed on the various impacts of tidal power generation on marine animals and the future assignments.

• Toxicological Research
• /
• v.11 no.2
• /
• pp.273-277
• /
• 1995

Several metabolic modulators on the generation of carbon monoxide (CO)from dichloromethane (DCM) was examined in adult female rats. It has been known that DCM is converted to CO by cytochrome P-450 or to carbon dioxide $(CO_2)$ by glutathione-dependent metabolic reaction. In rats treated with DCM (3 mmol/kg, ip) only, the carboxyhemoglobin (COHb) level reached a peak of approximately 10% 2 or 3 hr following the treatment. Disulfiram (300 mg/kg, ip) or allylsulfide (200 mg/kg, po), both known as a selective inhibitior for cytochrome P-450 2E1, blocked the increase in COHb concentratlons almost completely suggesting that the metabolic conversion of DCM to CO is mediated by the activity of this specific type of isozyme. YH439 (125 or 250 mg/kg, po), a potential hepatoprotective agent, decreased the COHb elevation as well indicating that this chemical is a potent inhibitor for 2E1. In rats treated with pyrazine (200 mg/kg, ip) 18 hr prior to DCM the peak COHb concentration was decreased by approximately 3 or 4%. However, pretreatment of rats with pyrazine either 24 or 48 hr before DCM increased the peak COHb concentration significantly compared to the rats treated with DCM only. The results in the present study strongly suggest that the generation of CO from DCM depends on the 2E1 activity and that the pharmacological and/or toxicological action of YH439 or pyrazine in animals or human is associated with its effect on this isozyme.

• Transactions of the Korean hydrogen and new energy society
• /
• v.24 no.5
• /
• pp.353-358
• /
• 2013

To develop preferential CO oxidation reaction (PROX) catalyst for small scale hydrogen generation system, supported Pt catalysts have been applied for the target reaction. The supports were systematically changed to optimize supported Pt catalysts. $Pt/Al_2O_3$ catalyst showed the highest CO conversion among the catalysts tested in this study. This is due to easier reducibility, the highest dispersion, and smallest particle diameter of $Pt/Al_2O_3$. It has been found that the catalytic performance of supported Pt catalysts for PROX depends strongly on the reduction property and depends partly on the Pt dispersion of supported Pt catalysts. Thus, $Pt/Al_2O_3$ can be a promising catalyst for PROX for small scale hydrogen generation system.

• Journal of Soil and Groundwater Environment
• /
• v.27 no.1
• /
• pp.31-38
• /
• 2022

The common algae and industrial waste, chlorella and red mud, were co-pyrolyzed in carbon dioxide condition to fabricate iron-biochar composite. In order to investigate the direct effect of chlorella and red mud in the syngas generation and the property of biochar, experiments were performed using mixture samples of chlorella and red mud. The evolution of flammable gasses (H₂, CH₄, CO) was monitored during pyrolysis. The produced biochar composite was employed as a catalyst for persulfate activation for methylene blue removal. BET analysis indicated that the iron-biochar composite mainly possessed meso- and macropores. The XRD analysis revealed that hematite (Fe₂O₃) contained in red mud was transformed to Fe₃O₄ during co-pyrolysis. The composite effectively activated persulfate and removed methylene blue. Among the composite samples, the composite fabricated from the mixture composed of 1:2 chlorella:red mud showed the best performance in syngas generation and methylene blue removal.

• Journal of Korean Society of Forest Science
• /
• v.101 no.2
• /
• pp.305-308
• /
• 2012

The box tree pyralid, Glyphodes perspectalis, was reared on an artificial diet based on dried powder of box tree leaves, Buxus microphylla var. koreana, and INSECTA F-II (Nihon Nosan Co., Ltd) at a ratio of 3:7 (w:w) and analyzed in their developmental characteristics from $1^{st}$ to $4^{th}$ generation. The developmental period of larva reared on artificial diet was longer than that of larva reared on host plant. Significant difference in larval period was also observed between $1^{st}$ and other generation groups. Pupation rate was the highest in $4^{th}$ generation followed by $3^{rd}$, $2^{nd}$, $1^{st}$ and host plant group. Significant difference in pupal period was noted between $1^{st}$ and 3rd generation group. Emergence rate was the highest in $4^{th}$ generation group followed by $3^{rd}$, host plant, $1^{st}$ and $2^{nd}$ generation group. There is a significant difference in male and female size between $1^{st}$ and $4^{th}$ generation group. Our result indicated that stable rearing of box tree pyralid through the year is possible by artificial diet, and the best adaptation to artificial diet was achieved at $4^{th}$ generation.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.06a
• /
• pp.361-364
• /
• 2009

KEPRI has studied planar type SOFC stacks using anode-supported single cells and kW class co-generation systems for residential power generation. A 1kW class SOFC system consisted of a hot box part, a cold BOP part and a water reservoir. A hot box part contains a SOFC stack made up of 48 cells with $10{\times}10cm^2$ area and ferritic stainless steel interconnectors, a fuel reformer, a catalytic combustor and heat exchangers. Thermal management and insulation system were especially designed for self-sustainable operation. A cold BOP part was composed of blowers, pumps, a water trap and system control units. When a 1kW class SOFC system was operated at $750^{\circ}C$ with hydrogen, the stack power was 1.2kW at 30 A and 1.6kW at 50A. Turning off an electric furnace, the SOFC system was operated using hydrogen and city gas without any external heat source. Under self-sustainable operation conditions, the stack power was about 1.3kW with hydrogen and 1.2kW with city gas respectively. The system also recuperated heat of about 1.1kW by making hot water. Recently KEPRI developed stacks using $15{\times}15cm^2$ cells and tested them. KEPRI will develop a 5 kW class CHP system using $15{\times}15cm^2$ stacks by 2010.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.2
• /
• pp.176-187
• /
• 2016

It takes considerable time to generate accurate clutter signal using conventional clutter generation scheme. In this paper, real-time schemes are proposed, which have reasonable accuracy and are applicable to testing the radar performance. Proposed methods are compared through the simulation, which represented that clutter signal can be generated in real-time when using proposed methods for simulated signal generator.

• JOURNAL OF ELECTRICAL WORLD
• /
• no.2 s.134
• /
• pp.38-43
• /
• 1988