• Bulletin of the Korean Chemical Society
• /
• v.10 no.6
• /
• pp.500-503
• /
• 1989

Synthetic studies have been carried out for the addition or substitution of phosphorus nucleophiles to the cation $[(exo-6-R-{\eta}^ {5_-}2-MeO-C_6H_5)Mn(CO)_2NO]PF_6,$ 2. $PPh_3$ reacts with 2 to yield the CO displaced product and $MePPh_2$ attacks the dienyl ring of 2 to yield the phosphonium adduct or the metal to give the CO displaced depending upon the reaction temperatures. Nucleophilic addition of HPPh2 to the dienyl ring of 2 gives a neutral substituted product. $P(OMe)_3$ reacts with 2 to yield a mixture of ring adduct and CO displaced product at room temperature. $At - 20^{\circ}C,\;P(OMe)_3$ attacks the dienyl ring of 2 to give a posphonium adduct, which underwent Arbuzov reaction. This reaction affords a new route to the phosphonate complexes.

• Fire Science and Engineering
• /
• v.33 no.1
• /
• pp.76-84
• /
• 2019

Experimental studies using an open cone calorimeter were conducted to provide information on the CO and soot yields of wood combustibles required for a kitchen fire simulation of PBD. A total of eight specimens were examined for medium density fiberboard (MDF) and particle board (PB), which are used widely in kitchen furniture production, depending on the water content, surface processing method, and surface color. The thermal penetration time related to the fire spread rate in the depth direction differed significantly according to the surface processing treatment method, even for a specimen of identical thickness. The CO yield ($y_{CO}$) of the MDF and PB series did not change significantly according to the combustion mode and surface treatment process in flaming mode. On the other hand, $y_{CO}$ was approximately 10 times higher in smoldering mode than in flaming mode. The soot yield ($y_{soot}$), however, varied considerably depending on the combustion mode and surface treatment process. In particular, a higher $y_{soot}$ was found in flaming mode and in the surface-treated specimens. Finally, the $y_{CO}$ and $y_{soot}$ of MDF and PB measured for the kitchen fire simulation of PBD were applied.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.185-185
• /
• 2019

Sustaining future wheat production is challenged by anthropogenically forced climate warming and drying led by increased concentration of greenhouse gases all around the globe. Warming stresses, originating from the elevated $CO_2$ concentration, are continuously reported to have negative impacts on wheat growth and yield. Yet, elevated $CO_2$ concentration, despite being disparagingly blamed for promoting warming, is also associated with a phenomenon called $CO_2$ enrichment; in which wheat yield can improve due to the enhanced photosynthesis rates and less water loss through transpiration. The conflicting nature of climate warming and $CO_2$ enrichment and their interplay can have specific implications under different environments. It is established form the field and simulation studies that the two contrasting phenomena would act severely in their own respect under arid and semi-arid environments. Wheat is a dietary staple for masses in Pakistan. The country's wheat production system is under constant stress to produce more from irrigated agricultural lands, primarily lying under arid to semi-arid environments, to meet the rapidly growing domestic needs. This work comprehensively examines the warming impacts over wheat yield and water productivity (WP), with and without the inclusion of $CO_2$ enrichment, under semi-arid environment of Punjab which is the largest agricultural province of Pakistan. Future wheat yields and WPs were simulated by FAO developed AquaCrop model v 5.0. The model was run using the bias-correction climate change projections up to 2080 under two representative concentration pathways (RCP) scenarios: 4.5 and 8.5. Wheat yield and WPs decreased without considering the $CO_2$ enrichment effects owing to the elevated irrigation demands and accelerated evapotranspiration rates. The results suggested that $CO_2$ enrichment could help maintain the current yield and WPs levels during the 2030s (2021-2050); however, it might not withhold the negative climate warming impacts during the 2060s (2051-2080). Furthermore, 10 - 20 day backward shift in sowing dates could also help ease the constraints imposed by climate warming over wheat yields and WPs. Although, $CO_2$ enrichment showed promises to counteract the adverse climate warming impacts but the interactions between climate warming and $CO_2$ concentrations were quite uncertain and required further examination.

• Microbiology and Biotechnology Letters
• /
• v.24 no.2
• /
• pp.217-221
• /
• 1996

Various treatments of naked barley with commercial liquefying enzymes have been emploved to reduce high viscosity of naked barley in cooking as a raw material for alcohol production and to increase alcohol yield. The enzyme BAN used for cooking and liquefaction of naked barley was able to make a reduction of one third of viscosity and to enhance alcohol yield of 4 l/Ton of raw material than the T120L was. Of course, alcohol yield depended in part on the applied saccharifying enzymes. The low temperature cooking of naked barley with BAN was favorable compared with high temperature cooking for both of reducing viscosity (210 vs. 237 cp) and final alcohol yield (Yp/so: 0.397 vs. 0.395 g/g) in industrial scale.

• Korean Chemical Engineering Research
• /
• v.53 no.1
• /
• pp.11-15
• /
• 2015

Sodium borohydride, $NaBH_4$, shows a number of advantages as hydrogen source for portable proton exchange membrane fuel cells(PEMFCs). Properties of $NaBH_4$ hydrolysis reaction using unsupported Co-B, Co-P-B catalyst were studied. BET surface area of catalyst, yield of hydrogen, effect of $NaBH_4$ concentration and durability of catalyst were measured. The BET surface area of unsupported Co-B catalyst was $75.7m^2/g$ and this value was 18 times higher than that of FeCrAlloy supported Co-B catalyst. The hydrogen yield of $NaBH_4$ hydrolysis reaction by unsupported catalysts using 20~25 wt% $NaBH_4$ solution was 97.6~98.5% in batch reactor. The hydrogen yield decrease to 95.3~97.0% as the concentration of $NaBH_4$ solution increase to 30 wt%. The loss of unsupported catalyst was less than that of FeCrAlloy supported catalyst during $NaBH_4$ hydrolysis reaction and the loss increased with increasing of $NaBH_4$ concentration. In continuous reactor, hydrogen yield of $NaBH_4$ hydrolysis was 90% using 1.2 g of unsupported Co-P-B catalyst with $3{\ell}/min$ hydrogen generation rate.

• Ocean and Polar Research
• /
• v.39 no.3
• /
• pp.195-203
• /
• 2017

The purpose of this paper is to estimate the optimal $CO_2$ emission in the maximum economic yield (MEY), maximum sustainable yield (MSY), and open access (OA) using a bioeconomic model. The results are as follows; in the case of $E_{MEY}$, $E_{MSY}$, and $E_{OA}$ levels, $CO_2$ emissions are estimated at $150,704,746CO_2/kg$, $352,211,193CO_2/kg$, and $301,409,492CO_2/kg$ respectively. We show that the $E_{MEY}$ is more efficient than the other levels. That is, the level of $E_{MEY}$ signifies the optimal economic fishing usage as the most economically efficient usage for large purse seine fishery catching mackerel species. The emission of $CO_2$ in $E_{MEY}$ is the lowest level. Also, the impacts of climate changes such as ocean temperature increase, ocean acidification, and the combined impact thereof show that the biomass of mackerel decreases.

• Journal of Hydrogen and New Energy
• /
• v.23 no.3
• /
• pp.199-206
• /
• 2012

HC-SCR was conducted over Co-Pt/ZSM5 catalyst coated over 200 cpsi cordierite in the condition of atomspheric pressure and $200^{\circ}C-500^{\circ}C$. Weight ratio of Co/Pt determined from EDX analysis was 8/2, which was almost equal to the weight ratio at preparation step. XPS showed that nitrates within cobalt precursor and chlorine withn Pt precursor were removed. TEM result demonstrated that crystallite size of cobalt and Pt was under 5nm. Among these tested hydrocarbon reductants, isobutane ($i-C_4H_{10}$) showed the highest de-$NO_x$ yield of 80% under the condition of the mole ratio of reductant/NOx=1.0 at $180^{\circ}C$. De-$NO_x$ yield from HC-SCR was increased as the carbon number of hydrocarbon reductant was increased. The decrease of bonding energy between C and H of HC reductant played a role to increase of de-$NO_x$ yield, which indicated that the dissociation step of C-H bond of hydrocarbon molecule might be the rate determining step of HC-SCR. The increase of oxygen concentration in the feed resulted in the decrease of de-$NO_x$ yield but the increase of CO and $N_2O$ yield.

• Korean Journal of Pharmacognosy
• /
• v.20 no.1
• /
• pp.43-47
• /
• 1989

An attempt was made to increase the yield of extraction of ginkgoflavonglycosides from leaves of Ginkgo biloba by treatments of with Cellulase C and macerating enzymes. The yield of dried extract and its contents of ginkgoflavonols, when treated only with cellulase C, were analyzed to be 1. 99% and 0. 38%, respectively. The contents of ginkgoflavonglycosides in the dried extracts were calculated to be 25. 28%. By the treatment with a mixture of three enzymes, cellulase C: cellulase NC and macerosin (1 : 1 : 2), the yield of the dried extract, ginkgoflavonols as well as their glycosides were determined to be 2. 48%, 0. 48% and 24. 16%, respectively.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.24 no.4
• /
• pp.275-284
• /
• 2022

Changes in air temperature, CO₂ concentration and precipitation due to climate change are expected to have a significant impact on soybean productivity. This study was conducted to evaluate the climate change impact on growth and development of determinate soybean cultivar in the southern parts of Korea. The high temperature during vegetative period, which does not accompany the increase of CO₂ concentration, increased the canopy photosynthetic rate in soybean, but after flowering, the high temperature above the optimal ranges interrupts the photosynthetic metabolism. In yield and yield components, high temperature reduced both the pod and seed number and single seed weight, resulting in a reduction of total seed yield. On the other hand, the increase in CO₂ concentration dramatically increased the canopy photosynthetic rate over the whole growth period. In addition, high CO₂ concentration increased the number of pods and seeds, which had a positive effect on total seed yield. Under concurrent elevation of air temperature and CO₂ concentration, canopy photosynthesis increased significantly, but enhanced canopy photosynthesis did not lead to an increase in soybean seed yield. The increase in biomass and branch by enhanced canopy photosynthesis seems to be attributed to an increase in the total number of pods and seeds per plant, which compensates for the negative effects of high temperature on pod development. However, Single seed weight tended to decrease rapidly by high temperature, regardless of CO₂ concentration level. Elevated CO₂ concentration did not compensate for the poor distribution of assimilations from source to sink caused by high temperature. These results show that the damage of future soybean yield and quality is closely related to high temperature stress during seed filling period.

• Journal of Welding and Joining
• /
• v.26 no.3
• /
• pp.61-66
• /
• 2008

As ships become to be larger than ever, the thicker plate and the higher tensile steel plate are used in naval shipyard. Though special chemical composition is needed for high-tensile steels, recent high-tensile steels are made by the TMCP(Thermo-Mechanical control process) skill. The increase of yield stress and tensile stress of TMCP steels is induced from bainite phase which is transformed from austenite, but that increased yield stress can be vanished by another additional thermal cycle like welding and heating. As thermal deformations are deeply related by yield stress of material, the study for prediction of plate deformation by heating should reflect principle of TMCP steels. This study developed an algorithm which can calculate inherent strain. In this algorithm, not only the mechanical principles of thermal deformations, but also the predicting of the portion of initial bainite is considered when calculating inherent strain. The simulations of plate deformation by these values showed good agreements with experimental results of normalizing steels and TMCP steels in welding and heating. Finally we made an inherent strain database of steels used in Class rule.