• 제목/요약/키워드: CO tube

검색결과 809건 처리시간 0.033초

흰쥐 해마절편에서 포도당/산소 고갈에 의한 5-hydroxytryptamine 유리변동에 미치는 Adenosine의 영향 (Effect of Adenosine on the Release of $[^3H]-5-hydroxytryptamine$ during Glucose/Oxygen Deprivation from Rat Hippocampal Slices)

  • 차광은;배영숙;이경은
    • The Korean Journal of Physiology and Pharmacology
    • /
    • 제1권6호
    • /
    • pp.657-664
    • /
    • 1997
  • The effects of adenosine, adenosine A1 receptor antagonist (DPCPX), or NMDA receptor antagonist (APV) on the spontaneous release of $[^3H]-5-hydroxytryptamine$ ($[^3H]-5-HT$) during normoxic/normoglycemic or hypoxic/hypoglycemic period were studied in the rat hippocampal slices. The hippocampus was obtained from the rat brain and sliced $400\;{\mu}m$ thickness with the tissue slicer. After 30 min's preincubation in the normal buffer, the slices were incubated for 30 min in a buffer containing $[^3H]-5-HT$ ($0.1\;{\mu}M,\;74{\mu}Ci/8\;ml$) for uptake, and washed. To measure the release of $[^3H]-5-HT$ into the buffer, the incubation medium was drained off and refilled every ten minutes through sequence of 14 tubes. Induction of glucose/oxygen deprivation (GOD; medium depleting glucose and gassed with 95% $N_2/5%\;CO_2$) was done in 6th and 7th tube. The radioactivities in each buffer and the tissue were counted using liquid scintillation counter and the results were expressed as a percentage of the total radioactivities. When slices were exposed to GOD for 20 mins, the spontaneous release of $[^3H]-5-HT$ was markedly increased and this increase of $[^3H]-5-HT$ release was blocked by adenosine ($10\;{\mu}M$) or DL-2-amino-5-phosphonovaleric acid (APV; $30\;{\mu}M$). Adenosine $A_1$ receptor specific antagonist, 8-cyclopentyl-1,3-dipropylxanthine (DPCPX) exacerbate GOD-induced increase of spontaneous release of $[^3H]-5-HT$. These results suggest that Adenosine may play a role in the GOD-induced spontaneous release of $[^3H]-5-HT$ through adenosine $A_1$ receptor activity.

  • PDF

도자기 유약용 Wagnerite의 합성(II) (Synthesis of wagnerite and its analogues for ceramic pigments (ll))

  • Yong- Sun Chung;Keun Ho Auh
    • 한국결정성장학회지
    • /
    • 제7권4호
    • /
    • pp.648-657
    • /
    • 1997
  • 합성원료로써 $Mg_3(PO_4)_2$$MgF_2$분말을 혼합한 후 백금밀폐용기를 사용하여 $1040^{\circ}C$에서 단일상의 wagnerite$(Mg_2PO_4F)$를 합성하였으며 이 결정상의 동질이상에 대하여 연구한 결과, 이미 발표된 연구 결과들과는 달리 $1255^{\circ}C$에서 단 한번의 가역적인 상전이가 관찰되었고, $1340^{\circ}C$에서 용융될 때까지 열분해 현상은 나타나지 않았으며, 이로써 2가 금속이온의 치환에 의해 여러 종류의 고용체를 합성해 낼 경우, 유약 및 플라스틱의 색상발현을 위한 안료로 사용될 수 있는 것으로 밝혀졌다. $Zn_4P_2O_8F_2$$Zn_3MgP_2O_8F_2$ wagnerite의 Zn 대신 2가 금속을 치환한 경우, 전반적으로 d값이 줄어들었으며 Co는 자주색, Ni은 금색, Cu는 녹색을 나타내었다. 또한 charge-coupled 치환을 시도한 결과, $A^{1+}A_3^{2+}X^{5+}X^{6+}O_8_F2$의 경우만 wagnerite가 형성되었다.

  • PDF

인산염이 쌀전분 현탁액의 리올로지에 미치는 영향 (Effect of Phosphate on Rheological Properties of Rice Starch Suspension)

  • 김일환;김성곤;이신영
    • 한국식품과학회지
    • /
    • 제19권3호
    • /
    • pp.239-244
    • /
    • 1987
  • 쌀 전분현탁액(5%)의 리올로지 특성을 모세관 점도계를 이용하여 조사하였다. 멥쌀 전분은 $30{\sim}60^{\circ}C$에서, 찹쌀 전분은 $30{\sim}55^{\circ}C$에서 인산염의 첨가 유무에 관계없이 항복응력이 없는 팽창유체 (dilatant fiuid)의 거동을보였다. 그러나 멥쌀 전분은 $65^{\circ}C$에서, 찹쌀 전분은$60^{\circ}C$에서 의가소성 유체의 거동을 보였다. 인산염의 첨가시 멥쌀 전분은 의가소성이 증가하는 현상을 보인 반면, 찹쌀 전분의 경우에는 뚜렷한 증가를 보이지 않았다. 온도 $30{\sim}50^{\circ}C$의 경우 전분현탁액의 유동의 활성화 에너지는 $0.88{\sim}1.45kcal/mole$이었으나, $60{\sim}65^{\circ}C$의 경우에는 멥쌀 전분이 약73kcal/mole, 찹쌀 전분이 45.57kcal/mole이었다. 인삼염의 첨가시에는 $89.39{\sim}182.89kcal/mole$이었으며, 아끼바레가 가장 높은 값을 찹쌀이 가장 낮은 값을 보였다.

  • PDF

백서를 이용한 후두 유발 근전도 검사 방법에 대한 연구 (Study of Laryngeal Evoked Electromyography Method in Rats)

  • 조선희;이재연;민선식;신유리;정성민
    • 대한후두음성언어의학회지
    • /
    • 제11권2호
    • /
    • pp.178-184
    • /
    • 2000
  • Laryngeal evoked EMG is the objective and quantitative method to measure the innervation of laryngeal muscle. If there is a mobility disorder of vocal cords, the cause and location of neural lesion co be understood by the laryngeal evoked EMG and if there is a vocal cord paralysis, the degree of recovery and the policy of treatment can be determined by it. Recently, the studies of reinnervation after recurrent laryngeal nerve injury have been actively carried out. Laryngeal evoked EMC is useful to these studies. The aim of study is to know whether noninvasive methods for stimulating the recurrent laryngeal nerve and for recording of compound action potential(CAP) using surface electrode are as useful as the invasive method using needle electrode. We obtained EMG of laryngeal muscle by various stimulating and recording methods : 1) Direct nerve stimulation by placing nerve cuff electrode made out of silastic tube and platinum wire and recording by insertion of hook wire electrode into posterior cricoarytenoid(PCA) and thyroarytenoid(TA) muscles, respectively. 2) Recording of compound action potential by surface electrode after stimulation of recurrent laryngeal nerve by the insertion of 27 gauge of needle electrode. 3) Recording of compound action potential by surface electrode after stimulating the recurrent laryngeal nerve by transcutaneous blunt rod electrode at tracheoesophageal groove. The amplitude, duration and latency of the CAP evoked by recurrent laryngeal nerve stimulation were compared among the three groups. The amplitude of CAP was smallest in the group recorded from posterior cricoarytenoid and hyroarytenoid muscle, and that recorded by surface electrode after stimulation by needle electrode was largest. The difference in amplitude between the group by hook wire recording and the two groups by surface electrode recording was significant statistically. There is no significant difference in duration and latency among three groups. Since the waveform of CAP from all three methods has similar duration, latency, we concluded that noninvasive method is a useful as invasive methods.

  • PDF

저압 $C_6H_6/Ar/O_2$ 화염에서 PAHs 생성 특성 및 플러렌$(C_{60},\;C_{70})$ 합성에 대한 연구 (PAHs Formation Characteristics and Fullerenes $(C_{60},\;C_{70})$ Synthesis in a Low-Pressure $C_6H_6/Ar/O_2$ Flame)

  • 이교우;김용우;황정호;정종수;최만수
    • 한국연소학회지
    • /
    • 제7권4호
    • /
    • pp.36-44
    • /
    • 2002
  • Carbon molecules with closed-cage structures are called fullerenes $(C_{60},\;C_{70})$, whose applications include super-conductors, sensors, catalysts, optical and electronic device, polymer composites, and biological and medical materials. The synthesis of fullerenes has been recently studied with low-pressure benzene/argon/oxygen flames. The formation of fullerene is known as molecular weight growth processes of PAHs (polycyclic aromatic hydrocarbon). This study presents results of PAHs and fullerene measurements performed in a low-pressure benzene/argon/oxygen normal co-flow laminar diffusion flame. Through the central tube of the burner, benzene vapors carried by argon are injected. The benzene vapors are made in a temperature-controlled bubbler. The burner is located in a chamber, equipped with a sampling system for direct collection of condensable species from the flame, and exhausted to a vacuum pump. Samples of the condensable are analyzed by HPLC (High Performance Liquid Chromatography) to determine the yields of PAHs and fullerene. Also, we computed mole fraction of fullerene and PAHs in a nearly sooting low pressure premixed, one-dimensional benzene/argon/oxygen flame (equivalence ratio ${\Phi}=2.4$, pressure=5.33kPa). The object of computation was to investigate the formation mechanism of fullerenes and PAHs. The computations were performed with CHEMKIN/PREMIX. As a result of this study, fullerenes were synthesized in a low pressure (20torr) $C_6H_6/Ar/O_2$ flames and the highest concentration of fullerene was detected just above the visible surface of a flame.

  • PDF

ZrS 분말표면상에 $SnO_2$코팅막의 형성 (Formation of $SnO_2$Coating Layer on the Surface of ZnS Powders)

  • 강승구;김강덕
    • 한국세라믹학회지
    • /
    • 제38권3호
    • /
    • pp.287-292
    • /
    • 2001
  • 본 실험은 목적은 CRT(Cathode Ray Tube)용 청색 형광체인 ZnS:Ag 분말 표면에 액상법으로 SnO$_2$를 균일하게 코팅하는 공정조건을 연구하는 것이다. 용매로서 물을 사용하고, Sn의 공급물질로서 SnCl$_4$.4$H_2O$, 침전 촉매로서 CO(NH$_2$)$_2$를 각각 사용하여, 균일 침전 방법으로 ZnS:Ag 분말표면에 SnO$_2$를 코팅할 수 있었다. 초기에 첨가되는 SnCl$_4$.4$H_2O$의 량이 Sn/Zn의 몰비기준으로 0.017인 경우에 ZnS:Ag 분말표면에 Sn(OH)$_4$가 균일하게 코팅되지만, 그 이상 첨가되면 과량의 Sn(OH)$_4$가 입자들 사이에 응집되었다. 코팅된 Sn(OH)$_4$는 비정질 구조로 규명되었으며, 이를 SnO$_2$결정상으로 전이시키기 위하여 300~$700^{\circ}C$ 범위 내에서 열처리를 행하였다. 비정질 Sn(OH)$_4$는 20$0^{\circ}C$이하에서 탈수되었고 45$0^{\circ}C$부터 SnO$_2$로 결정화되기 시작하였다. 순수한 ZnS의 경우, 50$0^{\circ}C$이하에서는 상변화가 없으나, $600^{\circ}C$에서 일부 산화되었으며 $700^{\circ}C$에서는 완전히 ZnO로 산화되므로, ZnS의 산화방지 및 SnO$_2$의 결정화를 동시에 만족하는 최고 열처리온도는 50$0^{\circ}C$로 규명되었다. 그러나 ZnS에 SnO$_2$가 코팅된 시편의 경우에는 $600^{\circ}C$가 되어도 ZnS 상이 거의 산화되지 않았고, $700^{\circ}C$에서도 ZnS와 ZnO 상이 공존한 것으로 보아 SnO$_2$코팅이 ZnS의 산화를 억제하는 것으로 나타났다.

  • PDF

2Cr 및 12Cr 크롬강튜브의 고온 장시간 사용에 따른 열화현상 (Material Degradation of 2Cr and 12Cr Tube Steels for High Temperature and Long-Time Exposure)

  • 최병학;이길재;김상호;홍기용;김우식;백운봉;남승훈
    • 한국가스학회지
    • /
    • 제16권5호
    • /
    • pp.28-34
    • /
    • 2012
  • 보일러 튜브용 크롬강의 열화기구에 대해 고찰하였다. 크롬강의 열화는 경도 및 응력-파단 수명의 변화를 동반하는데, 이는 주로 탄화물 분해 거동에 의존한다. 그런데 2Cr강인 T22의 열화는 이러한 탄화물 거동에 따르지만 12Cr강인 X20의 열화는 마르텐사이트 래쓰 성장거동에 따르기도 한다. T22와 X20의 열화에 의한 경도값과 응력-파단수명 변화현상을 미세조직적인 측면에서 고찰하였다.

Self-aligned Graphene Passivation Method by Poly-4vinylphenol/Poly(melamine-co-formaldehy de) for Flexible and Wearable Electronics

  • 박형열;이인열;박진홍
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
    • /
    • pp.473-473
    • /
    • 2013
  • 전자종이, 입을 수 있는 디스플레이, 플렉서블 터치 스크린, 투과성 면 등과 같은 차세대 플렉서블 투명 전자소자는 기계적으로 유연하고 광학적으로 투명하며 무게가 가벼운 특성을 지녀야 할 것으로 예상된다. 현재까지는Indium tin oxide (ITO), zinc tin oxide (ZTO), carbon nano tube (CNT)와 polyimide 계열의 물질들이flexible, wearable, and transparent electronics (FWTEs) 소자의 electrode, active channel, dielectric layers로 제안되어 활발히 연구되었다. 최근에는 높은 이동도(~200,000 cm2/Vs) 및 유연성(fracture strain of 30%), 투명도 (97.5% for monolayer)와 같은 특성을 갖는 그래핀에 대한 연구가 활발히 진행되고 있다. 그러나 그래핀을 차세대 플렉서블 투명 전자소자 구현에 적용하기 위해서는 플렉서블하고 투명한 절연체의 확보 및 그래핀의 진성(intrinsic) 특성 유지 등과 같은 문제점들을 해결해야 한다. 따라서, 본 연구팀에서는 그래핀 기반 플렉서블 투명 전자소자의 게이트 절연층으로 적합한 poly-4-vinylphenol/poly (melamineco-formaldehyde) (PVP/PMF) 물질을 제시하고 이에 대한 전기적 재료적 분석을 수행하였다. 특히 다양한 PVP와 PMF의 비율 및 가열(annealing 혹은 curing) 온도에서 형성된 PVP/PMF 층의 화학 및 전기적 특성을 FT-IR, I-V, 그리고 C-V 측정을 통해 확인하였다. PVP/PMF는 유기절연 물질의 하나로서 높은 유연성과 투명도를 갖고 있을 뿐만 아니라 그래핀에 적용 시 그래핀의 진성 특성을 확보할 수 있다. 이는 PVP/PMF에 존재하는 hydroxyl (-OH) 그룹과 그래핀 상에서 정공(hole)을 공급하는 것으로 알려져 있는 -OH 그룹들간의 cross-linking 메커니즘에 의한 것으로 예상된다. 마지막으로 최적화된 PVP/PMF (낮은 hysteresis 전압)를 게이트 절연층에 적용하여 polyethylene terephthalate (PET) 기판 및 연구원의 손가락 위에 95.8%의 투명도 및 0에 가까운 Dirac point를 갖는 그래핀 기반 플렉서블 투명 전자소자를 성공적으로 집적하였다.

  • PDF

예비 처리 방법에 따른 박막 SnO2 센서의 가스 감응 특성 (Gas sensing characteristics of thin film SnO2 sensors with different pretreatments)

  • 윤광현;김종원;류기홍;허증수
    • 센서학회지
    • /
    • 제15권5호
    • /
    • pp.309-316
    • /
    • 2006
  • The $SnO_{2}$ thin film sensors were fabricated by a thermal oxidation method. $SnO_{2}$ thin film sensors were treated in $N_{2}$ atmosphere. The sensors with $O_{2}$ treatment after $N_{2}$ treatment showed 70 % sensitivity for 1 ppm $H_{2}S$ gas, which is higher than the sensors with only $O_{2}$ treatment. The Ni metal was evaporated on Sn thin film on the $Al_{2}O_{3}$ substrate. And the sensor was heated to grow the Sn nanowire in the tube furnace with $N_{2}$ atmosphere. Sn nanowire was thermally oxidized in $O_{2}$ environments. The sensitivity of $SnO_{2}$ nanowire sensor was measured at 500 ppb $H_{2}S$ gas. The selectivity of $SnO_{2}$ nanowire sensor compared with thin film and thick film $SnO_{2}$ was measured for $H_{2}S$, CO, and $NH_{3}$ in this study.

(Fe, TiH2, C) 혼합 분말로부터 제조된 Fe-30 wt% TiC 복합재료 분말의 소결 (Sintering of Fe-30 wt% TiC Composite Powders Fabricated from (Fe, TiH2, C) Powder Mixture)

  • 이병훈;김지순
    • 한국분말재료학회지
    • /
    • 제22권5호
    • /
    • pp.356-361
    • /
    • 2015
  • Fe-30 wt% TiC composite powders are fabricated by in situ reaction synthesis after planetary ball milling of (Fe, $TiH_2$, Carbon) powder mixture. Two sintering methods of a pressureless sintering and a spark-plasma sintering are tested to densify the Fe-30 wt% TiC composite powder compacts. Pressureless sintering is performed at 1100, 1200 and $1300^{\circ}C$ for 1-3 hours in a tube furnace under flowing argon gas atmosphere. Spark-plasma sintering is carried out under the following condition: sintering temperature of $1050^{\circ}C$, soaking time of 10 min, sintering pressure of 50 MPa, heating rate of $50^{\circ}C/min$, and in a vacuum of 0.1 Pa. The curves of shrinkage and its derivative (shrinkage rate) are obtained from the data stored automatically during sintering process. The densification behaviors are investigated from the observation of fracture surface and cross-section of the sintered compacts. The pressureless-sintered powder compacts are not densified even after sintering at $1300^{\circ}C$ for 3 h, which shows a relative denstiy of 66.9%. Spark-plasma sintering at $1050^{\circ}C$ for 10 min exhibits nearly full densification of 99.6% relative density under the sintering pressure of 50 MPa.