• Journal of the Korean Magnetics Society
• /
• v.16 no.1
• /
• pp.1-5
• /
• 2006

The crystallographic properties and cation distribution of oxyspinels ferrite $Co_xFe_{1-x}O_4$ thin films have been explored by X-ray diffraction, vibrating sample magnetometer (VSM), and conversion electron $M\"{o}ssbauer$ spectroscopy (CEMS). Thin films are prepared by sol-gel method. Normal spinel structure is transformed to inverse spinel structure with increasing Co concentration CEMS results indicate that most of $Fe^{3+}$ ions are substituted to $Co^{3+}$ions. Accordingly $Co^{2+}$ ions on octahedral site migrate to tetrahedral site. Magnetic moment is decreased with increasing Co concentration, which means high spin $Fe^{3+}$ ions are replaced by low spin $Co^{3+}$.

• Applied Chemistry for Engineering
• /
• v.31 no.3
• /
• pp.323-327
• /
• 2020

The reaction characteristics of Ni/CeO_2-X which is highly efficient at a low temperature was investigated for an application to carbon dioxide methanation process. The CeO_2-X support was obtained by the heat treatment of Ce(NO₃)₃ at 400 ℃ and the catalyst was prepared by impregnation process. The operating parameters of the experiment were the internal pressure of the reactor, the composition of oxygen, methane, and hydrogen sulfide in the inlet gas and the reaction temperature. When Ni/CeO_2-X was used for the carbon dioxide methanation reaction, the CO₂ conversion rate increased by more than 25% as the pressure increased from 1 to 3 bar. The increase was large at a low reaction temperature. When both oxygen and methane were in the inlet gas, the CO₂ conversion rate of the catalyst decreased by up to 16 and 4%, respectively. As the concentration of oxygen and methane increased, the reduction rate of the CO₂ conversion rate tended to increase. In addition, the hydrogen sulfide in the inlet gas reduced the CO₂ conversion rate by up to 7% and caused catalyst deactivation. The results of this study will be useful as basic data for the carbon dioxide methanation process.

• Geomechanics and Engineering
• /
• v.31 no.3
• /
• pp.281-289
• /
• 2022

Bio-CaCO₃ is a blowout environment-friendly materials for soil improvement and sealing of rock fissures. To evaluate the chemical characteristics, shape, size and productivity of soybean urease induced CaCO₃ precipitates (SUICP), experimental studies were conducted via EDS, XRD, FT-IR, TGA, BET, and SEM. Also, the conversion rate of SUICP reaction at different time were determined and analyzed. The Bio-CaCO₃ product obtained by SUICP is comprehensively judged as calcite based on the results of EDS, XRD and FT-IR. The SUICP calcite precipitates are detected as spherical or ellipsoidal particles 3-6 ㎛ in diameter with nanoscale pores on their surface, and this morphology is novel. The median secondary particle size d₅₀ is 39-88 ㎛, indicating the agglomeration of the primary calcite particles. The Bio-calcite decomposes at 650-780℃, representing a medium thermal stability. The conversion rate of SUICP reaction can reach 80% in 24h, which is much more efficient than microbially induced CaCO₃ precipitation. These results reveal the knowledges of SUICP, and further direct its engineering applications. Moreover, we show an economic channel to obtain porous spherical calcite.

• Asian-Australasian Journal of Animal Sciences
• /
• v.24 no.12
• /
• pp.1757-1762
• /
• 2011

Aflatoxins are natural contaminants of poultry feeds and feed ingredients and cause liver damage, immunosuppression, reduction in performance and mortality in broilers. A number of studies have been carried out to study the effects of aflatoxin on feed conversion ratio in broilers. The results on feed conversion ratio of 10 research articles in broilers fed with aflatoxin from first day of age to six weeks of age were compiled and were subjected to meta-analysis. Chi-square test and $Tau^2$ (heterogeneity co-efficient) were applied to test for significance of heterogeneity of studies. To integrate results, fixed effect model by Inverse Variance method (IV method) was used when heterogeneity was insignificant and otherwise random effect model by DerSimonian and Laird Method (DL method) was used. The results of meta-analysis showed that the adverse effect of aflatoxin on feed conversion ratio at the end of first week was negligible, second week was medium and third to six weeks was very large.

• Journal of Advanced Marine Engineering and Technology
• /
• v.29 no.1
• /
• pp.98-106
• /
• 2005

The chemical conversion film formed on magnesium alloy was investigated by using the colloidal silica with some parameters such as solution pH. temperature, solution conditions, and treatment time. Moreover. the solutions consisted of colloidal silica titanium sulfate, and cobalt ions were used for the colloidal silica film to having a good corrosion resistance and adhesion properties. It was thought that the film at 298K was made with combination of Si-O. The quantity of film formed at high temperature such as 333K and 353K is smaller than dissolved quantity during chemical conversion treatment. Adding $CoSO_4$ to the colloidal silica solution enhanced the adhesion force between the silica film and magnesium substrate, The optimum conditions for the chemical conversion treatment solution were PH 2.90 s treatment, and 298K.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 2002.11a
• /
• pp.191-194
• /
• 2002

매체 순환식 연소(Chemical-Looping Combustion, CLC)는 금속 산화물(산소공여매체, oxygen carrier)의 산소를 이용하여 화석연료를 산화(연료 연소 공정)시키고, 환원된 금속을 다시 산화(매체 산화 공정)시키는 간접적인 연소 공정의 하나이다. 이 방식은 온실효과의 주발생원인 $CO_2$를 원천적으로 회수할 수 있고, 또한 화염이 없는 상태에서 연소반응이 진행됨으로 thermal NOx의 발생을 미연에 방지할 수 있어 고효율의 환경친화적인 연소공정이다.(중략)

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.03a
• /
• pp.717-721
• /
• 2010

Soil volume conversion factors are used for estimation of an excavated the soil volume which will be removed or added in levelling the ground surface of a construction site. An accurate evaluation method will help us reduce a construction cost and time consuming. In this study, we performed the laboratory tests, including grain size measurement, water content, specific gravity, porosity, density and XRD tests, to suggest reliable soil volume conversion factors and weathering indices in field using nondestructive methods. The weathering index and soil volume conversion factor L are obtained for different types of soils. At results, the CIW index is the best method measuring the weathering index and the factor L is relative to natural porosity, void ratio, density and dry density.

• Transactions of the Korean hydrogen and new energy society
• /
• v.25 no.2
• /
• pp.114-121
• /
• 2014

The synthesis of Fischer-Tropsch oil is the catalytic hydrogenation of CO to give a range of products, which can be used for the production of high-quality diesel fuel, gasoline and linear chemicals. Our cobalt catalyst was prepared Co/alumina, Co/silica and Co/titania by the incipient wetness impregnation of the nitrates of cobalt with supports. Co-based catalysts was calcined at $400^{\circ}C$ before being loaded into the FT reactors. After the reduction of catalyst has carried out under $450^{\circ}C$, FT reaction of the catalyst has carried out at GHSV of 4,000 under $200^{\circ}C$ and 20atm. From test results, the order of increasing activity for the catalyst was Co/alumina > Co/silica > Co/titania. When the content of Co metal such as 5, 12, 20 and 30wt% was changed, an CO conversion increased as the content of Co metal increased. The activity of catalyst has obtained the best value at 12wt% Co content.

• Korean Journal of Materials Research
• /
• v.24 no.12
• /
• pp.710-714
• /
• 2014

The effect of titanium dioxide ($TiO_2$) on the properties of color conversion glasses was examined for glasses based on $BaO-ZnO-B_2O_3-SiO_2$. One glass sample, containing 25 mol% of each component, was used as a reference; the other three glass samples contained 1, 3, and 5 mol% $TiO_2$, respectively. The four color conversion glass samples were prepared by sintering a mixture of glass frits and a $YAG:Ce^+$ phosphor. The characteristics of the color conversion glass samples, such as luminous efficacy, luminance, CIE (Commission International de I'Eclairage) chromaticity, CCT (Correlated Color Temperature), and CRI (Color Rendering Index) were analyzed according to the PL spectrum. The refractive index of the glass samples was found to increase with the titanium dioxide content. In conclusion, luminous efficacy of color conversion glasses increased as the content of $TiO_2$ was raised in the glass matrix.

• Transactions of the Korean hydrogen and new energy society
• /
• v.24 no.1
• /
• pp.1-11
• /
• 2013

Additives such as glycerol, methanol, acetone, and ethanol were used to prevent $NaBO_2$ from precipitation, and their effects on hydrogen generation properties of $NaBH_4$ hydrolysis were investigated. When the concentration of additives was 5 wt%, the additives such as methanol, acetone, and ethanol could not prevent $NaBO_2$ precipitation. Although glycerol prevented $NaBO_2$ precipitation, conversion efficiency decreased to 78.0% due to its viscosity. Based on test results, hydrogen generation tests were also performed at various concentration of glycerol and methanol to investigate the concentration effects on hydrogen generation properties. As the concentration of glycerol increased from 1 wt% to 3 wt%, conversion efficiency increased owing to additive effect. When its concentration increased to 5 wt%, conversion efficiency decreased due to its viscosity. As the concentration of methanol increased from 5 wt% to 10 wt%, conversion efficiency increased owing to additive effect. When its concentration increased to 15 wt%, conversion efficiency decreased due to $NaB(OCH_3)_4$ precipitate. Although conversion efficiency decreased about 1% when 3 wt% glycerol was added, $NaBO_2$ precipitation was prevented. Consequently, addition of 3 wt% glycerol to $NaBH_4$ solution improves stability of hydrogen generation system.