This study concerns the integrated gas sensor system of wire and wireless communication by using IoT(Internet of Things) technology. First, communication part is that it delivers the detection information, which transferred by wire or wireless communication and required control procedure based on a wireless module that receives the gas leakage information from wired or wireless detector, to administrator or user's terminal. Second, receiver part is that it shows the location and information, which received from the wired detector formed by a detecting sensor's node as linking with the communication part, and transfers these to the communication part. Third, wireless detector formed as a communication module of a detecting sensor node is that it detects gas leakage and transfers the information through wireless as a packet.Fourth, wired detector communicated with the receiver part and formed as a communication module of a detecting sensor node is that it detects gas leakage, transfers and shows the information as a packet. Fifth, administrator's terminal is that it receives gas leakage information by the communication part, transfers the signal by remote-control, and shut off a gas valve as responding the information. Sixth, database is that it is connected with the communication part; it sets and stores the default values for detecting smoke, CO., and temperature; it transfers this information to the communication part or sends a gas detecting signal to user's terminal. Seventh, user's terminal is that it receives each location's default value which stored and set at the database; it manages emergency situation as shutting off a gas valve through remote control by corresponding each location's gas leakage information, which transferred from the detector to the communication part by wireless.It is possible to process a high quality data regarding flammable or toxic gas by transferring the data, which measured by a sensor module of detector, to the communication part through wire and wireless. And, it allows a user to find the location by a smart phone where gas leaks. Eventually, it minimizes human life or property loss by having stability on gas leakage as well as corresponding each location's information quickly.
본 연구에서는 열 플라스마 용사 코팅 법을 사용하여 고체산화물 연료전지에서 사용되는 $La_{0.8}Ca_{0.2}CrO_{3}$(LCC), $La_{0.8}Sr_{0.2}CrO_{3}$(LSC), $La_{0.8}Ca_{0.2}CrO_{0.9}Co_{0.1}O_{3}$(LCCC) 세라믹 연결재를 코팅하여 코팅 층의 특성평가를 수행하였다. 열 플라즈마 코팅에 앞서 각 세라믹 연결재 입자의 특성평가를 위해 X선 회절, 미세 구조, 입자 측정 및 비표면적 분석을 수행하였다. 세라믹 연결재 입자의 특성평가 후, 열 플라스마 용사 코팅 법을 사용하여 연료극 지지체 위에 코팅하였으며, 코팅 층의 특성을 평가하기 위해 코팅 층의 표면, 파단면 분석, 가스 누출 속도 및 전기 전도도 측정을 수행하였다. 이러한 특성 평가 결과를 바탕으로 열 플라스마 용사 코팅 법을 통해 코팅된 LCCC 코팅 층이 고체산화물 연료전지의 세라믹 연결재로서 적합함을 확인하였다.
음향방출법은 차량 내부에 장착된 실린더의 경우 분해없이 동작중에 실시간으로 측정이 가능하므로 다른 비파괴평가 방법보다 많은 장점을 가지고 있다. 이러한 장점을 가지고 음향방출법은 미국 교통부(DOT)로부터 수압시험의 대체로 압력용기의 안정성 평가 방법으로 승인되었다. 본 논문은 압력용기 제조사로부터 UT 결함용기 및 결함이 있는 이음매 없는 압력용기인 Type 1과 Type 2에 대한 정량적인 평가기준에 대한 연구를 수행하였다. Type 1의 경우, ASTM E 1419-02를 기준으로 113L 규격의 준비된 용기로 피로반복시험을 통해 크랙의 성장부터 누설까지 경향을 파악하였다. Type 2의 경우, ASTM E 2191-02를 기준으로 119L 건전한 용기와 수압가압으로 불량용기를 용기에 slow-fill 방법으로 검증하였다. 본 연구에서 음향방출법을 이용한 Type 1과 Type 2의 시험은 불량용기와 건전한 용기를 효과적으로 구분할 수 있었다.
상하수도를 포함하는 7대 지하매설배관(상수도, 하수도, 전기, 통신, 가스, 난방, 송유)은 시공에서부터 운영 및 유지관리에 걸친 전 생애 주기 동안 체계적인 관리가 매우 중요하다. 특히, 지하매설배관의 전생애주기에 가장 큰 영항을 미치는 것은 시공과정이다. 새로운 도시를 건설하거나 서로 다른 지하매설배관을 유지관리하기 위해서는 매번 땅을 파고 시공 및 관련 작업을 수행해야 한다. 이 과정에 먼저 시공한 배관은 후에 시공하는 배관 시공 과정에 2차 및 3차 파손이 빈번하게 발생할 수 있는 가능성이 있다. 이 문제를 해결하기 위해서는 시공 과정에 일어나는 파손을 실시간으로 감시할 수 있는 시스템이 필요하다. 또한 지하매설배관의 환경에 따라 시스템의 지속적으로 운영하기 위한 전력의 공급이 제한되는 경우가 많아 기존 전력이 아닌 자연에너지를 이용한 안정적인 전력공급 시스템의 개발이 필요하다. 본 연구에서는 풍력과 태양광을 이용한 자연에너지를 이용하여 배관감시 시스템을 장기간(24시간 15일) 안정적으로 운영이 가능한 장치를 개발하였으며 이를 현장시험을 거쳐 운전성능을 확인하였다.
By the increase of the rate of existence of the hemodialyzing patients, they were required the long run treatment. Regardless of medical insurance expansion, hemodialyzing cost much expenses so that hospital has been considering the reuse of hemodialyzer and flowing euqipments along with the diverse study and progress of the ways of hemodialyzing and medical instruments. This study was aimed to provide the basic materials regarding the reuse of hemodialyzer which is used for the patients of chronic renal disease. The reusing program in the artificial kidney center of K hospital has been used for this study from 50 patients aften one year result from Sep. 1995 through Aug. 1996. Automatic equipment of DRS-4 made by Seratronic Co., was used as the equipment and it was retreated with the function test simultaneously. Compliaction and confirmation of the infection were by the records of the hemodialysis of the patients. SPSS was used for the analysis of the materials by computerization. The character of the patients and the rate of removal was by mistake and percentage, function test and rate of complication by Ftest(ANOVA) and the rate of complication per items by ${\chi}^2$ and Ftest. As the post test the Duncan's test was used for the statistically significant different variables in the standard of p<.05 after Ftest. The followings are the summary of the result : 1) In the function test of the new hemodialyzer and the reused one, and in all of CA110 and CF15.11, the dialyzer ultrafiltration coeffient(KUf) was appeared to have been higher in the reusing groups than the first use ones. This has been the normal limit showing no troubles with them. 2) In the function test of the new and reused hemodialyzer, in all of CA110 and CF15.11, the total blood volume was appeared to have been the less value in the reuse groups than the new ones. This was the price within 80% of the first price that both showed possible for use. 3) The result of reuse hemodialyzer of CA110 was $29.48{\pm}7.83$ in average in the test of leak test while $17.3{\pm}7.96$ in reuse of CF15.11. The normal limit of <60 was the leak test result. So both of the hemodialyzer was normal for reuse. 4) The rate of removal of Blood Urea Nitrogen(BUN) was 72.25% in CA110 hemodialyzer by reusing 16-20 times as the highest rate showing the better result in the reuse hemodialyzer, while in CF15.11 hemodialyzer showed 71.16% by highest rate in the first use by the highest rate with no difference from the reuse. 5) The rate of removal of serum creatinine of CA110 was 64.08% by highest rate in reuse of 1-5 times by showing better result in reuse hemodialyzer. While in CF15.11 66.47% the highest by reuse of 16-20 times showing no difference from each other. 6) No patients were admitted or precribed by antibiotics in relation with reuse dialyzer and no reports were shown about hepatitis $B{\cdot}C$. AIDS in fection. 7) Of the total 248 episods of complication due to the hemodialyzing, 86 by first use, 73 by 1-5 times, 35 by 6-10 times, 35 by 11-15 times and 19 by 16-20 times have been shown which have had no significant difference between the groups. 8) In the comparison of the expense for the hemodialyzer, there was the effect of saving 11,597.6 Won between the first and reuse hemodialyzer. And by decreasing the extracted materials, they did the great role of disposing the waste matters.
연구배경 : 히스타민은 폐 내에 널리 분포하며 강력한 모세혈관 투피성 증가 작용이 있을 뿐만 아니라 내피세포 표면에서 P-selectin의 발현을 증가 시키고 IL-8 분비를 촉진시켜 호중구의 조직 내 이동 및 활성화에 관여한 다고 보고되고 있다. 그러므로 내독소로 유도되는 급성폐손상의 발병기전에 내인성 히스타민이 호중구 의존성 폐손상의 주요 매개물질로 작용할 수 있을 것으로 추정되나 자세한 역할은 아직 잘 알려져 있지 않다. 저자들은 내독소로 유도되는 급성폐손상의 발병기 전에 내인성 히스타민이 관여한다면 항히스타민제를 전처치 시 내독소에 의한 폐손상이 감소될 수 있는지 알아보고 폐손상이 감소된다면 어떤 기전이 연관되는지 알아보고자 하였다. 방 법 : Sprague-Dawley쥐를 이용하여 생리 식염수를 기도 내 투여한 정상군, 내독소를 기도내 투여한 내독소군, $H_1$ 수용체 차단제 (mepyramine) 및 $H_2$수용체 차단제(ranitidine)를 정주 후 내독소를 투여한 $H_1$ 처치군 및 $H_2$ 처치군 등 모두 네군으로 나누어 처치 5 시간 후 급성폐손상의 여러 지표들을 측정 비교하였다. 결 과 : 내독소군은 정상군에 비해 측정한 폐손상지표들이 모두 유의하게 높았다(각 p<0.01). $H_2$처치군에서는 폐단백누출지표, BAL 액내 총단백 및 LDH농도가 모두 내독소군에 비해 유의하게 낮았다(각 p<0.05, p<0.05, p<0.05). $H_1$처치군에서는 내독소군에 비해 폐단백누출지표 만이 유의하게 낮았다(p<0.05). 그러나 $H_1$ 처치군 및 $H_2$처치군에서 측정된 MPO 활성도, 병리학적 손상지수와 BAL액내 호중구수, TNF-${\alpha}$, IL-$l{\beta}$ 및 IL-10 농도는 내독소군과 차이가 없었다. 결 론 : 백서에서의 내독소 유도 급성폐손상 모형에서 $H_2$ 수용체 차단제는 폐포-모세혈관 막의 증가된 투과성을 유의하게 감소시키나 호중구의 폐내 침윤은 감소시키지 못하였다.
MEMS 소자는 현재의 전자산업환경에서 여러 요구조건을 만족시킬 수 있는 특징을 갖추고 있으며 이러한 MEMS 소자를 이용한 MEMS 구조물의 packaging 방법에 있어서는 내부 MEMS 소자의 동작을 위한 외부 환경으로부터의 보호를 위하여 Hermetic sealing에 대한 요구를 충분히 만족시켜야 한다. 본 논문에서는 이와 같은 MEMS device의 진공 패키지를 구현함에 있어서 기판내부에 수동소자를 실장할 수 있는 LTCC 기술$^{1)}$ 을 이용하여 진공 패키징하는 방법에 대하여 소개한다. 본 기술을 이용하는 경우 기존의 Hermetic sealing이외에 향후 적층 기판 내부에 수동소자를 내장시켜 배선 길이 및 노이즈 성분을 감소시켜 더욱 전기적 성능을 향상시킬 수 있는 장점이 있게된다. 본 논문에서는 LTCC기판을 이용하여 패키징 시킨 후, 내부 진공도에 영향을 줄 수 있는 계면들에서의 시간에 따른 진공도 변화로부터 leakage rate를 측정 (stacked via : $4.1{\pm}1.11{\times}10^{-12}$/Torr1/sec, LTCC 기판/AgPd/solder/Cu의 여러 가지 계면구조: $3.4{\pm}0.33{\times}10^{-12}$/ Torrl/sec)하여 LTCC 기판의 Hermetic sealing 특성에 관하여 조사하였다. 실제 적용의 한 예로 LTCC 기술을 이용하여 Bolometer를 성공적으로 진공패키징할 수 있었으며 실제 관찰된 이미지를 함께 소개한다.
가스안전기기는 가정집에서 일어나는 중대사고를 매우 효율적으로 방지할 수 있다. 안전기기는 가정용 가스기기에 소화안전장치 등이 부착되어 있고 배관에 퓨즈콕, 가스경보차단기 등이 설치되어 있다. 그러나 이와 같은 안전기기가 설치되어 있어도 매년 수 백건의 가스사고가 발생하고 있다. 본 연구에서는 국내 가정에서 발생한 5년간의 가스사고를 결함수목분석도(FTA)를 이용하여 체계적이고 세부적으로 분석하여 가정용 가스안전기기의 각각에 대한 실효성을 검정하고, 안전기기의 보급에 따라 가스사고가 정량적으로 감소함을 제시하였다. 769건의 가정에서 일어난 사고를 분석한 결과 안전기기의 실효성은 다기능가스안전계량 기(마이콤미터)가 가장 크고, 퓨즈콕, 가스누출경보기, 일산화탄소 경보기 순으로 나타났다. 위 안전기기를 가정집에 $100\%$ 보급하는 경우에는 현재 일어나고 있는 사고의 약 $59\%$를 방지할 수 있고, 또한 대부분의 인명피해를 동반하는 대형사고를 방지할 수 있다.
The purpose of this paper is to present the manufacturing defect and damage pattern of a 3 phase 22.9/3.3kV oil immersed transformer, as well as to present an objective basis for the prevention of a similar accident and to secure data for the settlement of PL related disputes. It was found that in order to prevent the occurrence of accidents to transformers, insulating oil analysis, thermal image measurement, and corona discharge diagnosis, etc., were performed by establishing relevant regulation. The result of analysis performed on the external appearance of a transformer to which an accident occurred, the internal insulation resistance and protection system, etc., showed that most of the analysis items were judged to be acceptable. However, it was found that the insulation characteristics between the primary winding and the enclosure, those between the ground and the secondary winding, and those between the primary and secondary windings were inappropriate due to an insulating oil leak caused by damage to the pressure relief valve. From the analysis of the acidity values measured over the past 5 years, it is thought that an increase in carbon dioxide (CO2) caused an increase in the temperature inside the transformer and the increase in the ethylene gas increased the possibility of ignition. Even though 17 years have passed since the transformer was installed, it was found that the system's design, manufacture, maintenance and management have been performed well and the insulating paper was in good condition, and that there was no trace of public access or vandalism. However, in the case of transformers to which accidents have occurred, a melted area between the upper and the intermediate bobbins of the W-phase secondary winding as well as between its intermediate and lower bobbins. It can be seen that a V-pattern was formed at the carbonized area of the transformer and that the depth of the carbonization is deeper at the upper side than the lower side. In addition, it was found that physical bending and deformation occurred inside the secondary winding due to non-uniform pressure while performing transformer winding work. Therefore, since it is obvious that the accident occurred due to a manufacturing defect (winding work defect), it is thought that the manufacturer of the transformer is responsible for the accident and that it is lawful for the manufacture to investigate and prove the concrete cause of the accident according to the Product Liability Law (PLL).
This study compares the differences of the fit factor by the order of wearing preference between Particulate filtering facepiece respirators(PFFR) and glasses when participants wore simultaneously and a survey of physical and visual complaint. Recognition level about fit of respirators was investigated and the educational (before- and after-) effect of the fit factor. When participants wore PFFR and glasses, physical complaints were nose pressure, slipping, nose and ear pressure, ear pressure and rim loosen, the most highly physical complaints were nose pressure. Visual complaints were demister, blurry vision, dizziness, visual field, and lens dirty, the most highly visual complaints were demister. But, there was significant difference in physical complaint such as nose pressure(10.3%), slipping (23.0%), nose and ear pressure(14.3%), and rim loosen(16.2%), visual complaint such as visual field(13.8%) and lens dirty(32.4%). For the recognition of fit of respirators, respirators fitness, leak site, an initial point and an object, faulty factor, recognition level was higher. Fit factor was increased after education of proper wearing of respirator. Change of the fit factor was smaller compared to the normal breathing and after 6 actions in case of after education. Questionnaire consisted of general characteristics and physical/visual complaint, recognition of fit. Complaints were measured after the QNFT with multiple choices. Quantitative fit factor was measured by device and compared the result of (before- and after-) educational effect. Also, we selected to 6 actions (Normal breathing, Deep breathing, Bending over, Turning head side to side, Moving head up and down, Normal breathing) among 8 actions OSHA QNFT (Quantitative Fit testing) protocol to measure the fit factors. The fit factor was higher after the training (p=0.000). Descriptive statistics, paired t-test, and Wilcoxon analysis were performed to describe the result of questionnaire and fit test. (P=0.05) Therefore, it is necessary to investigate the quantitative research such as training program and glasses fitting factor about the wearing of PFFR and glasses simultaneously.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.