• Journal of Powder Materials
• /
• v.24 no.5
• /
• pp.389-394
• /
• 2017

Ni wires with a diameter and length of 0.4 and 100 mm, respectively, and a purity of 99.9% are electrically exploded at 25 cycles per minute. The Ni nanopowders are successfully synthesized by a pulsed wire evaporation (PWE) method, in which Ar gas is used as the ambient gas. The characterization of the nanopowders is carried out using X-ray diffraction (XRD) and a high-resolution transmission electronmicroscope (HRTEM). The Ni nanopowders are classified for a multilayer ceramic condenser (MLCC) application using a type two Air-Centrifugal classifier (model: CNI, MP-250). The characterization of the classified Ni nanopowders are carried out using a scanning electron microscope (SEM) and particle size analysis (PSA) to observe the distribution and minimum classification point (minimum cutting point) of the nanopowders.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.8
• /
• pp.1256-1261
• /
• 2015

Along with the increase of railway catenary system operation speed to 400 km/h, there have been growing demands for good quality current collection systems that satisfy quality standards as well as criteria for safe working. Retaining uniform elasticity tension of contact wires is essential in maintaining high quality contact between pantograph and OCL (Overhead Contact Line) of current collection systems in high speed railways. Therefore, the tension of contact wire must be kept within tight tolerance limits in both working conditions and adverse weather conditions of catenary system. In accordance with these conditions, this paper presents a real time monitoring system for the tensioning device of the newly installed catenary system on the special route of Honam high speed line for 400 km/h operation. For the verification of the true value of tension of contact wires, we have developed ring-type tensioning sensors which were installed on supporting points of mast which compose the catenary system. According to the field test performed on the Honam high speed line catenary system, variation of tension was measured accurately in real-time.

• Journal of Information Technology Applications and Management
• /
• v.20 no.3
• /
• pp.43-59
• /
• 2013

In order to realize the benefits of ITSM, it is necessary to institutionalize ITSM into the organizational culture. Currently, efforts to routinize ITSM lack in practice, and research in this area is also lacking. This study identifies the factors affecting the routinization of ITSM through literature review and interviews with experts, selects a company that has successfully routinized ITSM, and analyses the activities, methods, and procedures employed by the company on the factors in detail. The specific factors analyzed in the study include fulfillment of the customer requirements, top management support, communication, change management, training and education, quality of the ITSM system, and capability of the personnel. Important points verified in this study is that in order to realize organizational performance from ITSM, just the adoption of ITSM is not enough, but the routinization of ITSM through continuous and systematic management and improvement with the support of top management are required. Since this study is a descriptive case study, results of the study cannot be generalized. However, the study will provide practical information that can be referenced by the organizations attempting to routinize ITSM. In addition, results of the study will provide a basis of future research in ITSM.

• Journal of the Korean Society of Safety
• /
• v.31 no.3
• /
• pp.47-52
• /
• 2016

This paper describes the design and fabrication of high frequency ground impedance measuring system for assessment of grounding system for Lightning protection. The ground impedance measuring system has been designed and fabricated which makes it possible to assess the ground impedance by frequency ranges from 100 Hz to 1 MHz. The effective grounding systems having a very low impedance to electromagnetic disturbance such as lightning surges and noises in microelectronics and high-technology branches are strongly required. In order to analyze the dynamic characteristic of grounding system impedances in lightning and surge protection grounding systems, it is highly desirable to assess the ground impedances as a measure of performance of grounding system in which lightning and switching surge currents with fast rise time and high frequency flow. The measuring system is based on the variable frequency power supply and consists of signal circuit part, main control part, data acquisition and processing unit, and voltage and current probe system. The ground impedance measuring system can be used to assess grounding system during occurrence of lightning.

• Journal of Yeungnam Medical Science
• /
• v.36 no.2
• /
• pp.105-108
• /
• 2019

Background: Although kidney transplantation outcomes have improved dramatically after using calcineurin inhibitors (CNIs), CNI toxicity continues to be reported and the mechanism remains uncertain. Here, we investigated the neurotoxicity of CNIs by focusing on the viability of glioma cells. Methods: Glioma cells were treated with several concentrations of CNIs for 24 hours at $37^{\circ}C$ and their cell viability was evaluated using 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assay. Results: Exposure to 0, 0.25, 0.5, 2.5, 5.0, and 10.0 mM concentrations respectively showed 100%, 64.3%, 61.3%, 68.1%, 62.4%, and 68.6% cell viability for cyclosporine and 100%, 38.6%, 40.8%, 43.7%, 37.8%, and 43.0% for tacrolimus. The direct toxic effect of tacrolimus on glioma cell viability was stronger than that of cyclosporine at the same concentration. Conclusion: CNIs can cause neurological side effects by directly exerting cytotoxic effects on brain cells. Therefore, we should carefully monitor the neurologic symptoms and level of CNIs in kidney transplant patients.

• Child Health Nursing Research
• /
• v.28 no.1
• /
• pp.51-61
• /
• 2022

Purpose: Practical training in pediatric nursing gives students the opportunity to apply nursing knowledge to children in a realistic clinical context. Clinical practice faculty (CPF) and clinical nursing instructor (CNI) have played important roles in the pediatric nursing practicum. This study was conducted to develop a protocol to guide clinical practicum in pediatric nursing. Methods: A service design methodology was employed between August 2020 and May 2021 at four universities and four hospitals in South Korea. The participants were five CPFs, five CNIs, five nursing college graduates, and 60 nursing students. The service design process had four phases: discovery, definition, development, and delivery. Data were collected through self-report questionnaires, in-depth interviews, and observations. The data were analyzed using content analysis and descriptive statistics. Results: The participants reported needs for providing concrete guidance and explanation, nursing practice experience, and a link between school and the clinical field. A protocol was developed to fulfill the participants' needs. The protocol comprised detailed information, teaching methodology, and partnership to guide students in the pediatric nursing practicum. Conclusion: The protocol developed in this study can be used to provide guidance for students' clinical practice in the field of pediatric nursing.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.49 no.6
• /
• pp.311-323
• /
• 2023

Immunosuppressants are vital in organ transplantation including facial transplantation (FT) but are associated with persistent side effects. This review article was prepared to compare the two most used immunosuppressants, cyclosporine and tacrolimus, in terms of mechanism of action, efficacy, and safety and to assess recent trials to mitigate their side effects. PubMed and Google Scholar queries were conducted using combinations of the following search terms: "transplantation immunosuppressant," "cyclosporine," "tacrolimus," "calcineurin inhibitor (CNI)," "efficacy," "safety," "induction therapy," "maintenance therapy," and "conversion therapy." Both immunosuppressants inhibit calcineurin and effectively down-regulate cytokines. Tacrolimus may be more advantageous since it lowers the likelihood of acute rejection, has the ability to reverse allograft rejection following cyclosporine treatment, and has the potential to reinnervate nerves. Meanwhile, graft survival rates seem to be comparable for the CNIs. To avoid nephrotoxicity, various immunosuppressants other than CNIs have been studied. Despite averting nephrotoxicity, these medications show increases in acute rejection or other types of adverse effects compared to CNIs. FT has been a topic of interest for oral and maxillofacial surgeons, and the postoperative usage of immunosuppressants is crucial for the long-term prognosis of FT. As contemporary transplantation regimens incorporate novel medications along with CNIs, further research is required.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.12 no.3
• /
• pp.43-55
• /
• 2010

The major advantages to use CAD System are that it reduce time and effort to manufacture products, and also can demonstrate the condition of the final product prior to the actual manufacturing process of the selected design using the simulation programs in CAD system. Specially in weave design, for use as Computer-Aided Weaving system, the complicated Dobby weave can figured out easily through calculating the complex weave plans of multi shafts. As to one of dobby weave structures, Supplementary warp is the warp threads which are in addition to the regular warps of the woven fabrics, and used for decorating the band or expressing some patterns. The purpose of this study is to research the weave design of Supplementary warp using Computer-Aided Weaving system, which is dobby weave design program of Weave Point. For performing this design study, it was researched the classified woven fabrics depending upon weaving processing, Computer-Aided Weaving system, and the characteristic of Supplementary warp fabrics. On the basis of the theoretical research, Supplementary warp was worked for the 24-shafts AVL computer dobby loom that applied to the various patterned images. The design work was done by Weave Point program of dobby weave, and simulated to fabrics before woven into the computer dobby loom. To see the visual images of fashion items, these simulated bobby fabrics were processed by three-dimension modeling through YoungWoo CNI CAD system. All the patterns of the Supplementary warp in this study could be applied for decorating the fashion clothing and accessories.

• Fashion & Textile Research Journal
• /
• v.16 no.1
• /
• pp.43-54
• /
• 2014

In textile industry, needs for various weave drafts have been increased to produce high qualified textile goods. One of disadvantages of traditional textile industry was spending time and money on manual sampling. Nowadays, however, weave draft design and sampling using CAD programs reduce these consumption efficiently. Therefore, this study aimed to provide high qualified woven fabrics by weave draft designs influenced by geometric patterns. First, We analyzed geometric patterns, except for dot, stripe, and checks, in fashion collections from 2009 to 2014 S/S. Then, based on these analyses, design concepts were decided. Third, weave drafts influenced by geometric patterns were designed with weave CAD program, TEX PRO 10.0 by Youngwoo CNI inc. Forth, We simulated fabrics woven by new drafts using CAD programs, depending on fibers, yarns, density of woven, colors, and finishes. Unclassified geometric patterns would be expressed by small size patterns that influenced by retro moods, square patterns with various color variation, zigzag lines, and pieces of puzzles. Three design concepts were decided as greenness, neoclassic, and romantic chic. Thus, geometric patterns for printing were created as drafts for general looms, and one repeat of each draft were provided. According to the design concepts, we designed 13 fabrics with 4 geometric patterns weaving drafts. All Drafts were designed with CAD programs. Finally, same drafts were simulated as woven fabrics for both S/S and F/W seasons by changing each element, such as fiber, yarns, density, colors, and finishes.

• Information Systems Review
• /
• v.9 no.2
• /
• pp.189-207
• /
• 2007

The importance of IT service management to improve the effectiveness and efficiency of IT outsourcing practices or performance has been emphasized in the fields. Accordingly, several methodologies of IT service management have been adopted in a fashion. This case based research tries to analyze the effects of ITIL-based IT service management practice in a company on IT outsourcing performance. The case analysis shows that ITIL-based service management influences systems quality, information quality, and service quality in direct manner. But it does not influence systems use and systems satisfaction in a meaningful way. This study would help IT service managers construct IT service environment which improves the performance of IT outsourcing service delivery and also researchers set up research proposition in a concise way in the future.