• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1012-1016
• /
• 2004

In this paper, we propose a simple but optimized NC code generating technique for disk cams by means of tool path error control in a five-axis CNC machining center. Using the geometric theorem of the triangle made between manufacturing points and error checkpoint, the tool path error has been studied for disk cams profile generation and an improvement in the profile has been obtained. Then, based on the present manufacturing approach a computer program is developed on $C^{++}$ language to perform and to verify the shape design, the manufacturing simulation, and the optimized generation of the NC code.

• Journal of Institute of Control, Robotics and Systems
• /
• v.5 no.7
• /
• pp.800-807
• /
• 1999

A Periodic disturbance canceller is proposed to compensate for the periodic disturbance due to cutting process in a CNC machining center. The periodic disturbance canceller estimates the Periodic disturbance without phase delay. This is achieved by using linear phase low-pass filter and frequency response reciprocal filter of plant at the frequency of the periodic disturbance. This method is implemented in the position control system of the CNC machining center with general disturbance compensators in order to compensate for both the frictional force and the periodic disturbance. The experimental results are described to show its effectiveness.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.8
• /
• pp.2012-2022
• /
• 1993

For the machining of the sculptured surfaces on 5-axis CNC milling machine, the milling cutter direction vector was determined in the study (I) with 5-axis post-processing. Thus, it was possible to cut the sculptured surfaces on five-axis CNC milling machine with the end mill cutter. Then, for smooth machined surfaces in five-axis machining of free-from surfaces, this study develops an algorithm for prediction of cusp heights. Also, it generates tool path such that the cusp heights are constrained to a constant value or under a certain value. For prediction of the cusp height between two basis points, a common plane, containing the line crossing two basis points and the summation vector of two normal vectors at two basis points, is defined. The cusp height is the maximum value of scallops on the common plane after end mill cutter passes through the common plane. Sculptured surfaces were machined with CINCINNATI MILACRON 5-axis machining center, model 20V-80, using end mill cutter. Cusp heights were verified by 3-dimensional measuring machine with laser scanner, WEGU Messtechnik GmbH.

• Journal of the Korean Society for Precision Engineering
• /
• v.24 no.8 s.197
• /
• pp.97-107
• /
• 2007

The present CNC machining system if without any CAM software has been limited to 2D or 2.5D plane cut using lines, arcs and curves. If the CNC is equipped with a surface interpolation module and a surface reorganizing module inside it, we can easily try 3D surface machining without aid of CAM software. The existing NURBS surface interpolator is simple and direct to use for a unit surface. However, it enables only machining of each reference surface individually even when machining a simple composite surface. In this paper, we propose a method which can unify and reorganize various reference surfaces with a newly defined NURBS surface cycle command: a multi-repetitive cycle command such as in a CNC turning center. We also introduce a reorganizing rule for reference surfaces using NURBS properties. The usefulness of the proposed method is verified through computer simulation.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.148-152
• /
• 2000

Detection of tool wear is very important in automated manufacturing. This paper presents tool condition monitoring system based on the wavelet analysis of the AC servo motro current in drilling and milling process. The current measurement system is relatively simple and its mounting will not affect machining operations. The discrete wavelet transform was used to decompose the current signal of a spindle AC servo motor in time - frequency domain. The feature vectors were extracted from the decomposed signals and compared for normal and wear condition. The results show the possibility for the effective application of wavelet analysis to tool condition monitoring.

• Journal of Welding and Joining
• /
• v.28 no.3
• /
• pp.42-48
• /
• 2010

Polycarbonate (PC) and Acrylonitrile Butadiene Styrene (ABS) were welded by a combination of a diode laser and a CNC machining center. Laser beam delivered through the transparent PC and was absorbed in an opaque ABS. Polymers were melted and joined by absorbed and conducted heat. Experiments were carried out by varying working distance from 44mm to 50mm for the focus spot diameter control, laser input power from 10W to 25W, and scanning speed from 100 to 400mm/min. The weld bead and cross-section were analyzed for weld quality, and tensile results were presented through the joint force measurement. With focus distance at 48mm, laser power with 20W, and welding speed at 300mm/min, experimental results showed the best welding quality which bead size was measured to be 3.75mm. The shear strength at the given condition was $22.8N/mm^2$. Considering tensile strength of ABS is $43N/mm^2$, shear strength was sufficient to hold two materials. A single process was possible in a CNC machining system, surface processing, hole machining and welding. As a result, the process cycle time was reduced to 25%. Compared to a typical process, specimens were fabricated in a single process, with high precision.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.652-655
• /
• 1996

This paper develops an AC motor controller for applications. The AC motor controller is designed based on the variable structure control method and a variable structure disturbance observer is added to reduce the effects of exogenous disturbances. The designed controller is installed on the z-axis of a CNC machining center and milling experiments were performed. The results show improved performance on both position and speed tracking, when compared to the factory-designed servo controller.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2000.10a
• /
• pp.175-180
• /
• 2000

This paper describes the method and the process for impeller machining on 5-axis CNC machining center. Also, The CAD/CAM software for the impeller post processing is developed. The software can be interfaced with Solid-works software for confirmation of the impeller shapes. In this study, blades on impeller is described from Ruled-surfaces between two Ferguson curves. In this study, using 5-axis NC part program obtained from the developed software, a sample impeller was machined on 5-axis CNC machining center. The machined impeller was very agreeable to the designed impeller. Thus, theories proposed in this study can be very useful for the 5-axis machining of impeller blades with Ruled-surfaces.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1997.04a
• /
• pp.30-35
• /
• 1997

CNC Grinding Center is developed to improve the flexibility of grinding process and to obtain the high machine accuracy in grinding processes. It consists of a built-in type spindle with max. 25,000 rpm, ATC(automatic tool changer) for quick and reliable loading/unloading of tools, a rotary dresser for trueing, dressing, and personal computer based CNC controller, etc. This research concentrates on the machine structure, the evaluation of efficiency, and the machining technology of the developed prototype

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1753-1756
• /
• 2005

The sheet parts are formed with dies conventionally. But this conventional forming process is not suited to small volume and varied production for the reason of high cost. For the solution of this problem, a new forming process, which is called CNC incremental sheet forming, is being introduced. This process can form sheet parts without die, and is very well suited to small volume and varied production in space flight and automobile. In this paper, dieless CNC forming system based on a machining center is developed. A special device to grasp and pull the blank sheet built in the machining center and tool path generation S/W from STL file of 3-D model are developed. Several sheet parts are incrementally formed to verify the effectiveness of the developed system.