• Journal of the Korea Society of Computer and Information
• /
• v.7 no.4
• /
• pp.33-39
• /
• 2002

The present so many systems are used by evolution of Program to expel DNC(Direct Numerical Control) Network Infra for many CNC Controller. However, these systems is an inefficiency side in case of mutual connection at a long distance between Server Computer and Machining center Also, the machining center have so many controversial points in data transmission-receiver from the NC data server. So, this thesis well constructed the remote control system from CNC(Computer Numerical Control) Controller to CAD/CAM Server Computer. This system have some kinds of merits. Firstly. the machining center's user can easily use the saved NC data transmission from the CAD/CAM Server Secondly, the remote control is possible without the mutual conversation between the CAD/CAM Server and the machining center.

• Journal of Institute of Control, Robotics and Systems
• /
• v.21 no.10
• /
• pp.977-981
• /
• 2015

We propose a method for the implementation of an EtherCAT communication bus in a Linux-based open source Computerized Numerical Control (CNC) system. Recently, increasingly more CNC systems support real-time Ethernet protocols such as EtherCAT, which is a high-performance industrial communication protocol. For real-time CNC control over an Ethernet-based protocol, an additional layer driver needs to be implemented between the CNC system and the master of industrial communication protocol. Among the various solutions for the connection layer driver, we employ a Hardware Abstraction Layer (HAL) driver based on Linux. The operation of the implemented CNC system is demonstrated and confirmed by Hal Meter, which is used to observe the pins, signals, or parameters of HAL.

• Journal of Korea Technology Innovation Society
• /
• v.3 no.2
• /
• pp.78-93
• /
• 2000

Since computerized numerical controller(CNC) emerged as a result of the fusion of the electronics technology and the mechanical technology, there has been continuous evolution of CNC technology in the mechatronics industry. The industry is recently developing a new control system based on the fusion of personal computer(PC) and CNC. Upgraded PC has now integrated into CNC, making various machines possible to exchange data, software and hardware, and to greatly improve man-machine interface. The fusion of PC and CNC can form a new paradigm in technological innovation of not only control system but also whole machinery industry in near the future. Korea lagged behind the developed countries in the development of open control system with the fusion of PC. Turbotek, Hyundai Motor and Daewoo are leading companies, but their commercial possibility seems to be low because domestic market is too small to reap a commercial benefit. Nevertheless, the development of the system is an essential step for Korea to embark on a future technological paradigm of the machinery industry. The government needs to play some role for the development, for instance, government R&D projects, institutional building and training of related technicians.

• Journal of the Korean Society of Industry Convergence
• /
• v.7 no.2
• /
• pp.207-213
• /
• 2004

This paper describes the development of Behind-Tape-Reader (BTR) type DNC system using CYBER 180-830 as a central computer and IBM PC-AT cell control computer and NC lathe with FANUC 5T NC controller. In this system, the connection between central computer and cell control computer is done via RS-232C serial interface board, and that between cell control computer and FANUC 5T controller is done via parallel interface board. The software consists of two module, central computer communication module for NC program downloading and status uploading, NC machine running module for NC operating.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.5 no.2
• /
• pp.90-97
• /
• 1996

The purpose of this study is the development of a lathe which can cut any pistons of oval shape with high speed, accuracy and precision by CNC (Computer Numerical Control) method. Yaxis which is the mechanism of position determination with high speed response has been added to the CNC lathe and ovality and profile has been cut under the synchronous control of C-Y-Z axes. In the case of ovality of ø 0.5mm. the productivity can be improved up to 1500rpm by high speed cutting than modeling method.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.4
• /
• pp.152-162
• /
• 1996

The purpose of this study is the development of a lathe which can cut any pistons of oval shape with high speed, accuracy and precision by CNC (Computer Numerical Control) method. Y axis which is the position determinating mechanism with high speed response was added to the CNC lathe and the ovality and profile was cut under the control of C-Y-Z axes at same time. In the case of ovality of .phi. 0.2mm, the productivity can be improved up to 2500rpm(Y axis:83Hz) by high speed cutting than modeling method. Since a personal computer is used, it is easy to change the shape of pistion and can be applied promptly to many types of piston shppe by only changing data files.

• Special Issue of the Society of Naval Architects of Korea
• /
• 2011.09a
• /
• pp.101-105
• /
• 2011

In most shipbuilding company, cutting procedure is proceed by cutting machine which run by CNC(Computer Numerical Code) data. In our cutting process, all CNC data is created by our nesting post processor system automatically. Among them, in case that cutting piece in the remnant plate, our system creates only one piece CNC data. Because remnant plate is not typical shape, and ship designers don't know remnant plate shape and quantity. In can happen some merit and good point if we modify 1:1 piece NC data by shorten cutting path, reducing cutting time or re-arrangement piece. For modifying cutting data, outside workers have to call to ship designer or have to go to NC control room where control the CNC system and cutting machine. It makes stop work process, and it waste time. In this paper, we introduce a program that can modify and replace 1:1 NC data with continuous or common NC data automatically.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1995.10a
• /
• pp.12-17
• /
• 1995

The purpose of this study si the development of a lathe which can cut any pistons of oval shape with high seed, accuracy and precision by CNC (Computer Numerical Control) method. Yaxis which is the position determinating mechanism with high speed response was added to the CNC lathe and the ovality and profile was cut under the control of C-Y-Z axes at same tile. In the case of ovality of $\Phi$ improved up to 2500rpm(Y axis : 83Hz) by high speed cutting than modeling method. Since a personal computer is used, it is easy to change the shape of piston and can be applied promptly to many types of piston shape by only changing data files.

• Journal of the Korea Safety Management & Science
• /
• v.5 no.2
• /
• pp.87-98
• /
• 2003

With the development of CNC(Computer Numerical Control) and communication technology, the connotation and functions of Distributed Numerical Control have been greatly enlarged. In this study, we develop and implement a Distributed Numerical Control system that has real time and multi-tasking operation capability for the machining cell with various NC(Numerical Control) and CNC machines. With the consideration of economy, generalization and extension, this system is interfaced with Shop Floor Control System, Machine Control System and Tool Preparation System using advanced networking method. In the implementation phase, we use the ORACLE DBMS (Database Management System) as the DBMS and Microsoft Visual C++ as the programming tools.

• Proceedings of the Korea Technology Innovation Society Conference
• /
• 2000.05a
• /
• pp.154-173
• /
• 2000

Since computerized numerical controller (CNC) emerged as a result of the fusion of the electronics technology and the mechanical technology, there has been continuous evolution of CNC technology in the mechatronics industry. The industry is recently developing a new control system based on the fusion of personal computer (PC) and CNC. Upgraded PC has now integrated into CNC, making various machines possible to exchange data, software and hardware, and to greatly improve man-machine interface. The fusion of PC and CNC can form a new paradigm in technological innovation of not only control system but also whole machinery industry in near the future. Korea lagged behind the developed countries in the development of open control system with the fusion of PC. Turbo-tek, Hyundai Motor and Daewoo are leading companies, but their commercial possibility seems to be low because domestic market is too small to reap a commercial benefit. Nevertheless, the development of the system is an essential step for Korea to embark on a future technological paradigm of the machinery industry. The government needs to play some role for the development, for instance, government R&D projects, institutional building and training of related technicians.