• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.32 no.5
• /
• pp.436-446
• /
• 2006

The purpose of this study was to isolate and identify the bacteria in chronic maxillary sinusitis (CMS) lesions from 3 patients and to determine the antimicrobial susceptibility of them against 10 antibiotics. One of them was odontogenic origin and the others were non-odontogenic origin. Pus samples were collected by needle aspiration from the lesions and examined by culture method. Bacterial culture was performed in three culture systems (anaerobic, CO2, and aerobic incubator). Identification of the bacteria was performed by 16S rRNA gene (16S rDNA) nucleotide sequencing method. To test the sensitivity of the bacteria isolated from the maxillary sinusitis lesions against seven antibiotics, penicillin G, amoxicillin, tetracycline, ciprofloxacin, cefuroxime, erythromycin, clindamycin, and vancomycin, minimum inhibitory concentration (MIC) was performed using broth dilution assay. Our data showed that enterobacteria such as Enterobacter aerogenes (30%), Klebsiella pneumoniae (25%), and Serratia marcescens (15%) were predominately isolated from the lesion of non-odontogenic CMS of senile patient (70 year old). Streptococcus spp. (40.3%), Actinomyces spp. (27.4%), P. nigrescens, M. micros, and P. anaerobius strains were isolated in the lesion of odontogenic CMS. In the lesion of non-odontogenic CMS, Streptococcus spp. (68.4%), Rothia spp. (13.2%), and Actinomyces sp. (10.5%) were isolated. The susceptibility pattern of 10 antibiotics was determined according to the host of the bacteria strains ratter than the kinds of bacterial species. Even though the number of CMS was limited as three, these results indicate that antibiotic susceptibility test must be accompanied with treatment of CMS. The combined treatment of two or more antibiotics is better than single antibiotic treatment in the presence of multidrug-resistant bacteria in the CMS lesions.

• The Journal of the Korea Contents Association
• /
• v.11 no.12
• /
• pp.60-70
• /
• 2011

Conventional content management systems are independently developed for a specific field in general. Therefore usage of contents for the CMS will be limited to the corresponding CMS field. These characteristics might reveal a defect that CMS could not support effectively in exchange and sharing of information between CMSs. On the other hand, metadata standardization shows big differences in method and representation for the fields of CMS because all metadata standardizations are variously performed according to applications of them. There are lots differences that make interoperability between CMSs impossible. In this paper, we propose a novel metadata schema based on METS(metadata encoding and transmission standard) so that metadata standardization can be fulfilled in reality and solved the problem of duplicated contents created from different CMSs. This framework of integrated metadata proposed here can offer an interoperability between contents created by different CMSs, and discard duplicated contents. As a result of the proposed technology, we obtain 0.5% duplication rate from traditional 10.3%. In addition the filtering ability of duplicated contents shows from 92% to 96%, which proves the effectiveness and stability of the proposed technology.

• Journal of the Korean Chemical Society
• /
• v.54 no.3
• /
• pp.323-328
• /
• 2010

In this work, an intention to synthesize the carbon molecular sieve (CMS) with ideal sieving properties from palm shell has been attempted. The process includes three main stages: carbonization, carbon dioxide activation and polymer deposition using polyfurfuryl alcohols. Palm shell based activated carbon (AC) produced by carbon dioxide activation was used as raw material in synthesis of CMS. After preparing palm shell based AC, optimum concentration ratio of furfuryl alcohols and formaldehyde to AC for CMS synthesis was obtained in this study. Deposition of polyfurfuryl alcohols on the palm shell based AC was then carried out prior to carbonization. These polymer deposited AC was subjected to carbonization at $700-900^{\circ}C$ under inert condition. All the microporous materials were analyzed using micromeritics ASAP/2020. The results show that optimum concentration ratio of furfuryl alcohol and formaldehyde to AC is 1:2.5. The micropore with pore width less than 7 ${\AA}$ was formed on the polymer deposited AC at $700^{\circ}C$, $800^{\circ}C$ and $900^{\circ}C$ for 1.5 hours. Carbonization temperature at $900^{\circ}C$ for 1.5 hours was found to be optimum for CMS synthesis. The CMS produced under this condition has pore width of 5.884 ${\AA}$.

• Journal of Korean Society of Environmental Engineers
• /
• v.39 no.6
• /
• pp.339-347
• /
• 2017

The objectives of this study were to analyze ecological characteristics of fish compositions and estimate the optimal ecological flow using the physical habitat simulation system (PHABSIM) in Wonju stream and Boseong river. We sampled fishes using two gears such as casting net and kicknet to determine fish distribution and also measured flow velocity, water depth, bed material at the point where fish collected. Total number of species and individuals sampled were 20 and 2,104, respectively and dominant species was Zacco platypus (39.7%) and subdominant species was Z. koreanus (RA: 15.8%) in Wonju stream. In Boseong river, collected fishes were 1,638 individuals, 28 species. Dominant and sub-dominant species was Z. platypus (RA: 22.0%) and Microphysogobio yaluensis (RA: 17.2%), respectively. For calculating habitat suitability index (HSI), we selected Z. platypus as representative fish species and analyzed water depth and flow velocity. Water depth and flow velocity were 0.2-0.6 m, 0.1-0.3 m/s, respectively in Wonju stream and 0.3-0.6 m, 0-0.3 m/s, respectively in Boseong river. According to the analysis of ecological flow simulation, optimal flow was 1.1 cms and 0.3 cms in Wonju stream and 0.4cms, 2.2cms in Boseong river at up and down stream respectively. WUA (Weighted Usable Area) was 9.5%, 26.6% in Wonju stream and 34.8%, 53.3% in Boseong river at up and down stream respectively.

• Journal of Life Science
• /
• v.18 no.12
• /
• pp.1723-1727
• /
• 2008

Chlorella sp. CMS-1 strain was isolated from the outdoors cultivation pools in Culmansa Co., Ltd. This strain was found to be a rounded type of 3 ${\mu}m$. Phylogenetic analysis by the 18S rRNA sequencing using isolated strain is most similar to Chlorella sp. IFRPD 1018 gene at the level of nucleotide sequence identity at 99%. Accordingly, the isolated Chlorella strain was named as Chlorella sp. CMS-1 based on its morphological and phylogenetic properties. The concentrations of crude protein and fat were 59% and 0.01%, respectively. Major compositional amino acids (mg%) were glutamic acid 6.21, alanine 5.76, aspartic acid 5.44%, glycine 4.29%, and threonine 3.09% and major free amino acids (mg%) were ${\gamma}$-aminobutyric acid (GABA) 7.13%, L-alanine 1.44%, L-glutamic acid 0.90, L-leucine 0.26% and L-glycine 0.20%. The concentrations of major minerals were P 2.25%, K 2.25%, Na 1.09%, Mg 0.63%, and Ca 0.28%.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.40 no.5
• /
• pp.649-654
• /
• 1995

This study was conducted to investigate the utility and agronomic characteristics and use of cytoplasmic. male-sterile (CMS) haploid plants derived from interspecific cross between (male-sterile NC82$\times$burley21) F$_1$ plant (Nicotiana tabacum L.) and Nicotiana africana. Abundant seeds of high germinability were obtained when Nicotiana tabacum (cytoplasmic male-sterile F$_1$ plants) is pollinated by Nicotiana africana. Most of seedlings died at the cotyledonary stage. The remaining seedlings are viable F$_1$ hybrids or maternal haploids that can be easily distinguished. Number of interspecific Fl hybrids and matermal haploids per capsule obtained from the interspecific cross between cytoplasmic male-sterile tobacco F$_1$ plants and N.africana yielded 2.2 and 0.5 plants, respectively. Out of 149 CMS haploid plants obtained from interspecific cross, 102 plants showed green type while the others were yellow type for leaf and stem. This results agreed with the genetic ratios expected among haploid plants from the F$_1$ hybrids heterozygous for two recessive genes of yellow color of burley tobacco plant. Out of 83 CMS haploid plants inoculated with TMV, 48 plants showed resistant, while the others was susceptible. It agreed with the expected genetic ratios for a single dominant gene of TMV resistance. CMS haploid plant will be useful as a source material for breeding of CMS doubled haploid lines

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.123-123
• /
• 2015

Al doped ZnO(AZO) films as a transparent conductive oxide (TCO) electrode were deposited on glass, polyethylene naphthalate (PEN) and polyethylene terephthalate (PET) at room temperature by a conventional rf-magneton sputtering (CMS) and a facing target sputtering (FTS) using Al2O3 and ZnO targets. In order to investigation of AZO properties, the structural, surface morphology, electrical, and optical characteristics of AZO films were respectively analyzed. The resistivities of AZO films using FTS system were $6.50{\times}10-4{\Omega}{\cdot}cm$ on glass, $7.0{\times}10-4{\Omega}{\cdot}cm$ on PEN, and $7.4{\times}10-4{\Omega}{\cdot}cm$ on PET substrates, while the values of AZO films using CMS system were $7.6{\times}10-4{\Omega}{\cdot}cm$ on glass, $1.20{\times}10-3{\Omega}{\cdot}cm$ on PEN, and $1.58{\times}10-3{\Omega}{\cdot}cm$ on PET substrates. The AZO-films deposited by FTS system showed uniform surface compared to those of the films by CMS system. We thought that the films deposited by FTS system had low stress due to bombardment of high energetic particles during CMS process, resulted in enhanced electrical conductivity and crystalline quality by highly c-axis preferred orientation and closely packed nano-crystalline of AZO films using FTS system.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.45 no.5
• /
• pp.1-13
• /
• 2013

This study found fit optimum C, M, Y, K solid density and $CIEL^*a^*b^*$ value to paper & ink as well as check about printing machine state for color management in H-UV waterless off-set printing first. These values applied to GRACoL G7 calibration method. This method is one of color standard management method of printing. GRACoL G7 calibration method is possible stable tone reappearance by controlling gray balance by NPDC(Natural Printing Density Curve). Also, this study used values to make device profile as result that is gotten by application of GRACoL G7 calibration method. This profile was applied to CMS(Color Management System) of H-UV waterless off-set printing, and the result was possible by color management that correspond in printing quality standard of ISO 12647-2 and GRACol 2006 specifications.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.25 no.1
• /
• pp.121-133
• /
• 2007

The CMS(color management system) software was to enable consistent color reproduction from original to reproduction. The CMS was to create RGB monitor and printer characterization profiles and then use the profiles for device independent color transformation. The implemented CMM(color management module) used the CIELAB color space for the profile connection. Various monitor characterization model was evaluated for proper color transformation. To construct output device profile, SLI(sequential linear interpolation) method was used for the color conversion from CMYK device color to device independent CIELAB color space and tetrahedral interpolation method was used for backward transformation. UCR(under color removal) based black generation algorithm was used to construct CIELAB to CMYK LUT(lookup table). When transforming the CIE Lab colour space to CMYK, it was possible to involve the gray revision method regularized in the brightness into colour transformation process and optimize the colour transformation by black generation method based on UCR technique. For soft copy colour proofing, evaluating several monitor specialism methods showed that LUT algorithm was useful. And it was possible to simplify colour gamut mapping by constructing both the look-up table and the colour gamut mapping algorithm to a reference table.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.38 no.1
• /
• pp.90-97
• /
• 1996

In Korea, total sediment discharge of a river has been estimated simply by using certain sediment transport formulas including, among others, Einstein's formula. Those formular, however, are known not to be reliable enough for the result calculated by them to be used directly to river planning and management. Therefore, the study used the Modified Einstein Procedure to the estimation of total sediment discharge, because this method is reliable estimated by measurement. Here, measurement of sediment discharge used depth integrating method. The major results obtained from the study for estimation by depth integrating method of sediment discharge in Naeseong stream are as follow; 1 The sedeiment characteristics of Naeseong stream are; The distribution of sediment grain size shows that silt and clay are 55% and sand is 45%. and the bed load sediment grain size is constituted that sand contained with the grain size from O.062mm to 2.0mm is 80% 2. The sediment rating formulas derived from the regression analysis between the sediment discharge and flow discharge are; Seogpo-Gyo : Qs=$0.017 \times 10^{-4} Q^{2.352}$, where discharge is l0cms $0.074 \times 10^{-4} Q^{2.066}$, where discharge is l0cms