• Journal of the Korean Applied Science and Technology
• /
• v.12 no.2
• /
• pp.21-28
• /
• 1995

N-아실 아미도에틸 N-아미도 카르복시산 유도체들의 물리적 특성과 계면성이 연구되었다. 묽은 용액의 표면장력은 $22{\sim}32dyne/cm$의 값을 나타냈으며 이들 cmc의 범위는 $0.8{\sim}6.0mmol/L$이었다. 표면장력 저하능은 소수성의 알칼사슬이 길어질수록 그리고 카르복시기와 아미드기 사이의 메틸렌기의 수가 감소할수록 증가하였다. 반응생성물의 구조와 계면성의 관계를 비교 ${\cdot}$ 검토한 바 온화한 Krafft point와 뛰어난 습윤성, 낮은 기포력을 나타내었다.

• Bulletin of the Korean Chemical Society
• /
• v.26 no.1
• /
• pp.107-114
• /
• 2005

Molecular aggregates of surfactant molecules consisting of one or more bilayers arranged in a hollow, closed, usually spherical geometry are termed “esicles”or “iposomes” In recent years it has been found that in certain systems the vesicular structure forms spontaneously and is long lived, and it has been suggested that these structures may in fact constitute the equilibrium state in these cases (as is true of micelles) This paper deals with the mixed CMC, vesicles, phase behavior, phase transition, geometrical structure, their formation and characterization in the aqueous solutions of mixed cationic/anionic surfactants systems. TEM micrographs revealed that the vesicles were of spherical shape and that their size was of around 180 nm. The zeta potentials are positive at CGS1-rich regions and negative at SLES-rich regions. In the region where SLES/CGS1 (6/4), the zeta potentials are very small, implying that the vesicles at this surfactant ratio may be less stable. At other surfactant ratios, the vesicles are thought to be stable, supported by large absolute values of zeta potentials and little change in UV absorbance for several months.

• The Korean Journal of Rheology
• /
• v.9 no.1
• /
• pp.6-15
• /
• 1997

계면활성제용액에 서로 다른 기능을 하는 두 종류의 첨가제를 투입하여 미셀의 미 세구조 전이현상을 규명하였다. 양이온 계면활성제는 CMC 이상의 농도에서 2단계의 미세 구조 전이거동을 나타낸다. 우선 구형 미셀은 첨가제의 투입에 의하여 표면에서의 친수성기 간의 반발력이 감소됨으로써 실린더형 또는 디스크형미셀로 전이가 일어난다. 더욱 농도가 증가하면 이방성을 가지는 실린더형 미셀간의 중첩 또는 hooking 현상에 의한 두 번째 전 이가 일어난다. 이때 미셀 용액은 흔히 점탄성을 나타내거나 확연한 비뉴톤성 유체거동을 나타낸다. 본 연구에선 heptanol의 화확구조적 차이가 물성에 나타내는효과를 규명하고 wormlike 미셀을 형성하는 MaSal에 의한 점탄성 거동을 살펴보았다. Heptanol의 화학구조 의 영향을 보면 약친수성기인 OH기가 알킬그룹과 나란하게 존재하여 밀집된 구조를 가지 기 쉬운 primary heptanol이 가장효과적으로 미세구조 전이를 유도함을 관찰하였다. 다른 이성질 hetanol의 경우 secondary heptanol이 teriary heptanol에 비하여 효과적임을 보이지 만 화학재할수 있는 농도범위가 매우 좁아 대부분 영역에서 비뉴톤성거동을 나타냄을 확인 하였다. 즉 NaSal를 사용한 경우 실린더형 미셀이 존재할 수 있는농도범위가 매우 좁아 대 부분 영역에서 비뉴톤성 거동을 나타냄을 확인하였다. 즉 NaSal 이 첨가된 용액은 선형점탄 성거동을 보이며 몰비가 증가함에 따라 scission 과정이 관찰되었다. 또한 몰농도비에 따라 항복응력과 shear thickening 특징을 보이는데 이는 흐름장의 세기에 따라 미세구조 변화가 일어나기 때문이다.

• Proceedings of the Korean Society of Applied Pharmacology
• /
• 1998.11a
• /
• pp.172-173
• /
• 1998

A research collection of Pseudomons solanacearum bacteria, a pathogen causing ‘bacteria wilt’ disease of more than 265 plant species, represented for northern provinces of Vietnam has recently been established and was saved for examination of antifungal activity in their culture fluids. All strains used in this work have been isolated from infected tomato, potato, and groundnut collected from production fields and they express different levels of virulence on their host plants. Cell-free culture fluids of these strains were tested for antifungal activity (to inhibit growth of mycelium and to destroy germination tube of fungal spores) on a number of fungi that either infect or associate with vegetable crops of Solanaceae family (tomato, potato, pepers...), fruit plants (banana), and even well-known by Vietnamese traditional medicine herbal plants belonging to Trifoliatus, Schefflera, Homalomena and Panax genera (Araliaceae family) of which roots are used as a resource of the herbal material. The antifungal activity was found in nearly all strains tested. Result of study on chitin, CMC, tween 80 and casein degradation abilities of the latter suggested that antifungal activity of positively-found strains may be due to their ability of extracelluar chitinase's excretion that destroy fungal cell wall.

• Journal of Korean Society of Water and Wastewater
• /
• v.18 no.6
• /
• pp.724-730
• /
• 2004

Effects of the biosurfactant produced by Rhodococcus erythropolis on the solubilization and biodegradation of phenanthrene were investigated. Based on surface tension measurements, the average critical micelle concentration of the biosurfactant was estimated to be about 16mg TOC/L. The apparent solubility of phenanthrene increased linearly with the addition of biosurfactants above the CMC, and the concentration of solubilized phenanthrene was 38.9mg/L in 322mg TOC/L biosurfactant solution. The weight-solubilization ratio of biosurfactants for phenanthrene was approximately 118.8mg/g, this value was over 5 times greater than that of sodium dodecyl sulfate. Using a known phenanthrene degrader, batch phenanthrene biodegradation experiments were conducted with and without biosurfactants in liquid culture. The rate and extent of phenanthrene mineralization by the phenanthrene degrader with biosurfactants were much greater than those without biosurfactants. The greater phenanthrene mineralization observed in the presence of biosurfactants is attributed to the increased phenanthrene concentration in the aqueous culture due to the partitioning of the compound to biosurfactant micelles. The biosurfactant did not exhibit any toxic effect on mineralization of glucose by the phenanthrene-degrader.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.40 no.3
• /
• pp.23-29
• /
• 2008

This study was performed to improve the printability of Hanji using a microbial cellulose from Saprolegnia ferax through investigating the printability of Hanji sized with the mixture of the microbial cellulose and various kinds of sizing agents. Conclusions obtained from the results of this study were as follows. The proper concentration of a microbial cellulose in sizing a printable Hanji with it was 0.5%. In general, there was no remarkable effect but some effect on the opacity and ink density. Hanji was sized with the mixture(5:5) of microbial cellulose(0.5%) and AKD(1.0%). As a result, ink spread was remarkably improved by the girth reduction of ink spot. There was remarkable effect because the mixture(5:5) of a microbial cellulose(0.5%) and CMC(1.0%) improved not only the gloss but also the density and girth of ink spot. Mixing(7:3) with corn starch(3.0%) showed the smallest girth of ink spot among applied sizing agents. Mixing(7:3) with PVA(5.0%) also showed some effect in the density and girth of ink spot.

• Korean Journal of Microbiology
• /
• v.14 no.2
• /
• pp.84-94
• /
• 1976

Cellulase components, CMCase(Cx) and Avicelase$(C_1)$, were partially prueified, from the culture extract of a strain of Trichoderma koningii by column chromatography on DEAE-Sephadex A-50 and the step of gel filtration through Sphadex G-150, Optimum pH of CMCase was 5.2 and Avicelase showed the highest activity at pH 5.6 in acetate buffer. Optimal temperatures for activities of CMCase and Avicelase were $50^{\circ}C\;and\;60^{\circ}C, $ respectively. More than 70% of the activities of two enzymes were remained after heating at $60^{\circ}C$ for 30 min and Avicelase is more stable than any other fungal enzymes. The Michaelis constants, Km, of CMCase and Avicelase were 0.116% of CMC and 0.281% of avicel. And also the values of maximum velocity, Vmax, of CMCase and Avicelase were $23.20{\mu}g\;and\;2.54{\mu}g$ of reducing sugar per min. Of the metal ions tested against the activites of CMCase and Avicelase, $Cu^{++}, \; Hg^{++}, \;and\;Pb^{{++}$ are remarkably effective inhibitors. The molecular weights of Cx and $C_1$ component were estimated to be about 47, 000 and 61, 000 by gel filtration method.

• Journal of Pharmaceutical Investigation
• /
• v.25 no.3
• /
• pp.185-192
• /
• 1995

Precipitation reaction occured between berberine in Coptidis Rhizoma and glycyrrhizin in Glycyrrhizae Radix when they were boiled together in aqueous solution and the supernatant solution thus obtained did not show any antibacterial activity which was derived from berberine. The content of berberine in BG and CGP by HPLC analysis were 41.1%, 8.3% respectively. BG was occured mostly at pH 5.0. The solubility of berberine was 0.15%, while that of BG and CGP was 0.07%, 0.12%, respectively. CGP shown more increased antibacterial activity to gram positive bacteria, S. dysenteriae and K. pneumoniae than berberine. The absorption rates of CGP in stomach, duodenum and jejunum of rats were compared with those of Coptidis Rhizoma water extracts (CR), which were increased more than CR. The time required for the maximum serum concentration of berberine from CGP in mice was 90 minutes after oral administration. The maximum serum concentration of berberine from CGP was higher than that from CR. The dissolution of CGP was increased more than berberine and BG in both artificial gastric and intestinal fluids. The dissolution of CGP pill made from gelatin was 63.4% in artificial gastric fluids and that made from CMC was 76.0% in artificial intestinal fluids.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.27 no.9_10
• /
• pp.1153-1159
• /
• 2003

The effects of changing aqueous solution properties by nonionic surfactants on wetting behavior and water retention properies of hydrophobic PET (polyethylene terephthalate) fabric were reported. The aqueous solution properties were diversified by mixing and diluting two nonionic surfactants, i.e., sorbitan monolaurate (Span 20) and polyoxyethylene(20) sorbitan monolaurate (Tween 20). The surface wetting properties ($cos{\theta}$) of PET fabric were greatly improved by adding $10^{-1}g/dl$ Tween 20 and further improved by mixing Span 20 to the system. The water retention properties (W) of PET fabric were also greatly increased by addition of $10^{-1}g/dl$ Tween 20. In diluted surfactant systems, the $cos{\theta}'s$ were increased with decreasing surface tension of aqueous liquids. The ratios of aqueous liquid retained in the pore structure to liquid retention capacity (W/H) were also increased with decreasing surface tension, however, W/H values were dramatically increased right after critical micelle concentration (cmc). The existence of micelles was important for the retention of aqueous liquids in the fabric. The critical surface tension of PET fabric used was found to be 28.7dyne/cm.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.41 no.2
• /
• pp.212-223
• /
• 2017

This research investigated the screen printing method for natural indigo dye on cotton fabric. We examined four types of thickening agents (arabic gum, guar gum, indalca, and CMC) based on their ability to retard the oxidation of natural indigo print paste while the paste remained on the screen frame. The results indicated that the retardation of arabic gum towards oxidation was the greatest among the four types of thickening agents. The highest K/S value of the printed cotton was observed with a dye concentration of 50g/L fermented indigo powder. The best printing results were obtained when the duration of dye efficiency was tested for the 10 minutes of the dye paste remaining on the screen with a thickening agent concentration of 26.56% that represented 530 cps viscosity. The test of colorfastness to washing and rubbing of the printed cotton resulted in grade 5, and the colorfastness to sunlight resulted in grade 4. Chinese traditional Naminwhapo printing was reproduced on cotton fabric using the natural indigo printing method derived from this study.