• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.204-205
• /
• 2011

In thin film silicon solar cells, p-i-n structure is adopted instead of p/n junction structure as in wafer-based Si solar cells. PECVD is a most widely used thin film deposition process for a-Si:H or ${\mu}c$-Si:H solar cells. For best performance of thin film silicon solar cell, the dopant profiles at p/i and i/n interfaces need to be as sharp as possible. The sharpness of dopant profiles can easily achieved when using multi-chamber PECVD equipment, in which each layer is deposited in separate chamber. However, in a single-chamber PECVD system, doped and intrinsic layers are deposited in one plasma chamber, which inevitably impedes sharp dopant profiles at the interfaces due to the contamination from previous deposition process. The cross-contamination between layers is a serious drawback of a single-chamber PECVD system in spite of the advantage of lower initial investment cost for the equipment. In order to resolve the cross-contamination problem in single-chamber PECVD systems, flushing method of the chamber with NH3 gas or water vapor after doped layer deposition process has been used. In this study, a new plasma process to solve the cross-contamination problem in a single-chamber PECVD system was suggested. A single-chamber VHF-PECVD system was used for superstrate type p-i-n a-Si:H solar cell manufacturing on Asahi-type U FTO glass. A 80 MHz and 20 watts of pulsed RF power was applied to the parallel plate RF cathode at the frequency of 10 kHz and 80% duty ratio. A mixture gas of Ar, H2 and SiH4 was used for i-layer deposition and the deposition pressure was 0.4 Torr. For p and n layer deposition, B2H6 and PH3 was used as doping gas, respectively. The deposition temperature was $250^{\circ}C$ and the total p-i-n layer thickness was about $3500{\AA}$. In order to remove the deposited B inside of the vacuum chamber during p-layer deposition, a high pulsed RF power of about 80 W was applied right after p-layer deposition without SiH4 gas, which is followed by i-layer and n-layer deposition. Finally, Ag was deposited as top electrode. The best initial solar cell efficiency of 9.5 % for test cell area of 0.2 $cm^2$ could be achieved by applying the in-situ plasma cleaning method. The dependence on RF power and treatment time was investigated along with the SIMS analysis of the p-i interface for boron profiles.

• Korean Journal of Agricultural Science
• /
• v.7 no.2
• /
• pp.169-175
• /
• 1980

These studies were conducted to induce the available mutant strains in acetic acid bacteria by the irradiation of UV-light and the treatment of N-methyl-N'-nitro-N'-nitrosoguanidine. 109 strains which were capable of producing acid in the ethanol containing medium were isolated from vinegar and Kimchi collected from the region of Daejeon city. From the collection T-50 strain was identified to have a strong fermentation power and selected as a mother strain for the study. Two mutants were obtained by treating T-50 strain with UV and NTG, and these mutants had a rapid acid production in the initial stage. The study was then made to compare the basic condition for acetic acid production of the mother strain and two mutant strains. The summarized results were as follows; 1. The isolated strain (T-50) was identified as Acetobacter aceti by Bergey's manual and Acetic acid bacteria (Tokyo Univ. press). 2. The selected strain was died completely when the strain was irradiated with 15 W UV-light at a distance of 45 cm for 160 seconds. 3. The mutants such as U-48 and N-67 were rapid in the acetic acid production at the initial stage compare to the mother strain. 4. Acetic acid formation by the shaking culture method was maximized in 2 days culture, and the optimal temperature for acetic acid production was $30^{\circ}C$. 5. Acetic acid was effectively produced by the addition of 0.1% ammonium sulfate as a nitrogen source and was also produced rapidly by the addition of 0.1% glucose.

• Journal of radiological science and technology
• /
• v.40 no.4
• /
• pp.581-587
• /
• 2017

This study was based on the data of total mineral content of about 99% at the age of 16-26 years, we aimed at female university students who are important for bone formation in their early 20s. The purpose of this study was to investigate factors of eating habits affecting their bone density and to provide data to prevent osteoporosis which might occur in the future. It was conducted on 100 female university students in their 20s, the bone mineral density according to BMI was measured by DEAX, and the analysis of 10 eating habits items and the results of BMD measurement on their own results in Excel 2010. As a result, the height was $161.08{\pm}4.70cm$, the weight was $52.43{\pm}6.43kg$, and the BMI was $20.22{\pm}2.48$, which correlated with BMD (p<0.05). According to the BMI classification, 20 had low weight and 80 had normal weight, and BMD was $0.20{\pm}0.41$ at normal weight. In the same sex, the mean T-score of the young adult group was $-0.04{\pm}0.99$ compared with the BMD of the young adult group, and the mean Z-score of the same age group was $0.02{\pm}0.93$ (p<0.001). Eating habits affecting bone mineral density were significantly affected by 3 meals per day, 1-3 cups of coffee per day and p<0.05 for Low salt formula intake. 6-9 dairy product intake was also p<0.05 but not significant. Therefore, it is considered that when 20s female students become middle-aged woman, they should have proper eating habits so that osteogenesis can be improved at young age in order to prevent bone disease.

• Korean Journal of Soil Science and Fertilizer
• /
• v.10 no.1
• /
• pp.61-67
• /
• 1977

A study was conducted in order to compare the topdressing method of the conventional fertilizers as control and the deep application method of the ball complex fertilizer newly developed. The ball complex fertilizer consisted of 5% of nitrogen, 5% of phosphorus, and 7% of potassium. Basal application of nitrogen for the rice plant was the same for both control plots and ball complex plots. One ball complex fertilizer per four hills was applied at depth of 12~13cm 35days before heading stage while control plot received three times topdressing at different growth stages as usual practice. The results obtained were as follows. 1. The ball complex fertilizer applied in the soil was continuously utilized by the rice plants until harvest time while nitrogen and potassium uptake of control plots was reduced rapidly after heading stage. Daily uptake of nitrogen and potassium per hill at maturing stage were 0.45mg and 0.68mg in control plots, but 4.80mg and 7.0mg respectively in ball complex plots. 2. Dry matter productivity of the rice plant in control plots, well coinciding with nutrients uptake pattern, was maximum just after heading stage decreased at maturing stage. But dry matter productivity in ball complex plots was much higher at maturing stage than at heading stage. 3. Ball complex application increased effective tillering rate, causing higher panicle number per hill. 4. Ball complex application brought about 528kg/10a of hulled grain yield while the conventional practice 423kg/10a. 5. Deep application of ball complex was superior to usual practice in terms of yield components such as panicle number per hill, filled grain number per panicle, maturing rate, and 1,000 grain weight. 6. From the morphological characteristics point of view, the deep application of ball complex made the flag leaf and the 2nd leaf heavier, larger and broader as compared to control treatment. 7. It is considered that by applying the ball complex fertilizer at depth of 12~13cm sufficient amount of nitrogen and potassium could be utilized by rice plants during the maturing stage and assimilated in the leaf blade, consequently making the flag leaf and the 2nd leaf bigger and healthier. The fact can easily explain that the ball complex plots had higher capacity of photosynthesis, less discoloration of lower leaves, bigger leaf area index, and better grain yield as compared to the conventional practice. In conclusion the deep application method of the ball complex fertilizer was superior to the routine topdressing method of the usual fertilizers.

• Korean Journal of Soil Science and Fertilizer
• /
• v.31 no.2
• /
• pp.143-150
• /
• 1998

In order to evaluate the nitrogen (N) balance, from the different application methods and levels of $^{15}N$ applied to a satsuma mandarin orchard soils in spring, we surface-applied N as urea at the rates of 50 (water-dissolved), 100 (solid and water-dissolved) and 150% (solid) of the recommended rate ($180kg\;ha^{-1}$) in spring (lebeled N), summer (nonlebeled N) with application ratio of 5:2:3. Fruit yield and quality were not significantly affected by any treatment. Nitrogen contents of spring flush leaves in late August were 3.0% regardless of the treatments. The N recovery by parts of tree itself was in the order of leaves, fruits, roots, stems, and the highest recovery per tree was 22.3% in the 50% recommended water-dissolved surface broadcast while there were not much differences for N recovery (11.9 to 13.6%) among the other three treatments. Total N content in top 30cm of soils was 0.47% regardless of the treatments, but N proportion and total residual N from the fertilizer applied increased with increasing N rate while the N recovery in soils decreased. For the recommended N rate, N proportion and the residual N from the fertilizer applied were greater in the water-dissolved surface broadcast than those in soils surface broadcast. The highest total (tree + soils) N recovery was 70.9% in the 50% recommended water-dissolved surface broadcast, but tended to decrease to 52.2, 46.6, and 43.2% for the recommended water-dissolved surface broadcast, 100 and 150% of the recommended solid surface broadcast, respectively.

• Journal of the Korean Wood Science and Technology
• /
• v.10 no.3
• /
• pp.133-134
• /
• 1982

This experiment has been made to investigate the absorption of watersoluble zinc chloride by Pinus densiflora S. et Z. at different moisture content, under soaking process, to decide the optimum content condition for the maximum absorption of zinc chloride by the wood tested and to investigate the concentration of zinc chloride affecting each moisture content of wood. Material was cut in the Dept. of Forest, College of Agr. S.N.U. Suwon, Korea. Sample was divided into sap and heartwood group and cut $2{\times}2{\times}2\;cm$ in size, having exact three dimensions, using the part of D.B.H. The numbers of sample were 20 pieces for each moisture content condition for both sap and heartwood. Especially, the samples were protected from exposure to keep moisture content in green condition. The ranges of moisture content tested were as the table 3 and 4. The conclusions were as follows: 1. With 3% zinc chloride solution, the rate of absorption decreased with the time increased, if the air seasoned Korean red pine (Pinus densiflora S. et Z.) was treated in steeping process. Initial absorption for 30 minutes was more than 50% of total absorpon for 24 hours. 2. Rate of absorption was same under the green condition, while rate of absorption under the moisture content 7 to 30% varied. 3. Although it was not quite proportional change in the absorption with the difference of moisture content, the great change in the absorption occured by seasoning. With exception sap green condition, sapwood twice more permeable than the heartwood in the oven dried condition and it has been observed the nearly same amount of absorption at the moisture content of 7%, 10% and 15% respectively in heartwood. 4. It was better from water in wood from view-point of absorption of zinc chloride solution, but it was difficult practically to obtain the smallest moisture content, and then it was decided that values of allowable moisture content, on the basis of mean absorption, were 15% to 20% in the sapwood, and in the heartwood, 10% to 15%. The mean absorption for each moisture content in the sap and the heartwood were as following. 5. In general, the concentration of zinc chloride after steeping was nearly same between moisture content and sap and heartwood respectively.

• Korean Journal of Ecology and Environment
• /
• v.34 no.3 s.95
• /
• pp.206-214
• /
• 2001

Water quality and Pollution state of Lake Chungcho were evaluated during three years from 1998 to 2000. We surveyed physicochemical parameters, and TSI (trophic state index) was calculated using TP, Chl. a, and SD (secchi disc transparency) data of growing season average. Water samples were collected bimonthly except freezing season. During the study period, total annual precipitation in 1998, 1999 and 2000 year was 1,797,1,722 and 1,345 mm, respectively. Salinity and conductivity were high($29.3{\pm}5.5\;ppt$, and $45,105{\pm}7,585\;{\mu}S/cm$) then other lagoons in the Eastern Coast of Korea. Chemocline was formed by salinity at $0.5{\sim}1.5\;m$ water depth. As a result of this, DO concentration of hypolimnion was below $3.0\;mgO_2/L$. Especially, when intense chemocline was formed, temperature of hypolimnion was higher than epilimnion. Secchi disc transparency, chlorophyll a, and COD were $1.8{\pm}0.3\;m$, $15.7{\pm}20.7\;mg/m^3$, and $3.1{\pm}0.8\;mgO_2/L$, respectively. Most of TN/TP ratios below 20, but concentration of TN and TP was high. Values of TSI ranged between 59 and 77, indicating a eutrophic condition in this system.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.39 no.5
• /
• pp.502-511
• /
• 1994

Investigated were the relationships between plumule elongation characteristics and seedling emergence of 98 varieties including native, improved and red rice varieties of Korea, and varieties from U.S.A., Italy, Japan, etc. under proper and excess soil moisture regimes. Under excess soil moisture condition the seedling emergence and establishment rates were much lower in most of the varieties and the seedling emergence rates were delayed substantially in all varieties employed. The seedling emergence rates were lowest in dwarf and some semi-dwarf varieties showing poor plumule elongation under proper soil moisture condition. The seedling emergence and establishment rates were significantly correlated with the length of mesocotyl, coleoptile and incomplete leaf under both soil moisture regimes, and with the lower first and second internode length under excess soil moisture condition. Average emergence duration showed significant negative correlation with the length of mesocotyl, coleoptile and incomplete leaf under both soil moisture regimes and significant positive correlations with the first and third lower internode length. Based on the standardized partial regression analysis only the variations of mesocotyl and coleoptile length contributed significantly to the varietal difference in seedling establishment rate, and so did the variations of mesocotyl and incomplete leaf length to the varietal differences in emergence speed. In conclusion varieties with greater elongation characteristics of mesocotyl, coleoptile and incomplete leaf are desirable for higher and speedy seedling establishment in dry-direct seeding.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.12 no.1
• /
• pp.137-150
• /
• 2010

Traditionally, like many people in mountain region of the Himalaya, the Lwang communities depend on mix of subsistence agriculture, animal husbandry, and seasonal migrant labor for their livelihoods. These traditional systems are characterized by low productivity, diverse use of available natural resources (largely for home consumption), limited markets, and some aversion for innovation. The potential to generate wealth through commerce has largely been untapped by these mountain residents and thus is undervalued in local and national economies. Introduction of organic tea farming is a part of Lwang community's several initiatives to break the vicious poverty cycle Annapurna Conservation Area Project (ACAP) played facilitating roles in all their efforts since beginning. In five years, the tea plantation emerged as a new means for secured a livelihood. This study aims to analyze the current practices in tea farming both in terms of farm management and soil nutrient status(technical) and the prosperity of the tea farmers (social). The technical aspect covers the soil and tea leaf analysis of various nutrients contents in the soil and tea leaf. Originally, the technical aspect of the study was not planned but later during the consultation with the advisor it was taken into consideration which added value to the research study. The sample were collected from different locations and analyzed on the field itself. The other part of the study i.e. the social aspect was done through questionnaire survey and focus group discussion. the tea farming provided them not only a new opportunity but also earned an identity in the region. This initiative was undertaken as a piloting measure. Now that the tea is in production with processing unit established locally, more serious consideration has to be given for better yield and economic prosperity. This research finding will help the community to analyze their efforts and make correction measures in tea garden management and application of fertilizer. It is also expected to fill up the gaps of knowledge and information required to reduce economic stresses and enhance capacity of farmers to make the tea farming a sustainable and beneficial business. The findings are expected to Sustainability of organic tea farming has direct impacts on biodiversity conservation compared to the other traditional farming practices that are more resource intensive. The study will also contribute to identify key action points required for reducing poverty while conserving environment and enhancing livelihoods

• Journal of Korea Water Resources Association
• /
• v.45 no.6
• /
• pp.569-581
• /
• 2012

The levee is the facility which is constructed along with river for the protection of landside and for passage of water when there is a flood. When the seepage is exposed to the atmosphere on the landside surface of levee, it may eventually lead to levee failure. The seepage water may be removed from the landside surface by a properly designed drainage system. The purpose of the study is to show seepage control effect of a pervious toe drain, and to compare two drainage methods of a pervious toe drain. One is the pervious toe drain suggested by U.S. Army Corps of Engineers (USACE) and the other is that suggested by Japan Institute of Construction Engineering (JICE). The levee model constructed has the following dimension: the base width is 2.6 m; the crest width is 0.4 m; the side slope 1 : 2. The water depth in the riverside is 0.5 m. The shape of the toe drain by USACE is triangular. The shape of the toe drain by JICE is rectangular. They were installed with the base length of 0.4 m. The levee model without the toe drain showed saturation surface on the land side in the experiment but not with the toe drain. The experiment results was applied to a numerical analysis model using SEEP/W to calibrate and verify. The numerical analysis results for 35 cm and 30 cm drain width showed that the drain by JICE is a little bit safer than the drain by USACE. It is also easier to construct the toe drain by JICE. The results in the study would be applied to plan the seepage control for a levee with pervious toe drain.