• Journal of the Korean Wood Science and Technology
• /
• v.34 no.4
• /
• pp.31-36
• /
• 2006

This study was conducted to improve the bond strength of plywood bonded with F/U molar ratio urea-formaldehyde (UF) resins modified with the selected FGMDI prepolymer contents for various purposes. The amount of FGMDI was mixed with liquid UF resin at 0 wt% (as control), 2 wt%, 5 wt%, 10 wt%, 25 wt%, and 50 wt% based on the resin solids. As results, in bonding strength, plywood with F/U molar ratio of 1.4 showed the highest value in Type 2 test and all molar ratio UF resins modified with over 25 wt% of the FGMDI showed more than $11kgf/cm^2$, which was satisfied the minimum requirement of KS standard, $7.5kgf/cm^2$, after Type1.5 testing. As F/U molar ratio was increased and the FGMDI addition in the UF resin was increased, average reduction rate of Type 1.5 bonding strength compared with Type 2 was significantly decreased.

• Journal of Embryo Transfer
• /
• v.11 no.3
• /
• pp.271-281
• /
• 1996

The effect of superovulation (PMSG, FSH) on the ovarian response of matured cows were tested. The survival rates of bovine embryos and ovarian oocytes frozen by slow, rapid freezing and vitrification were investigated. A total of 15 heads of cow were devided into 3 groups by injection dose of GTH (PSMG, FSH). Each group was superrovulated with injections of 2, 500, 3, OOOJU PSMG and 40mg FSH followed by injection of 30mg PGF2a. Embryos were non-surgically recovered from superovulated cows 6~7days after estrus. The recovered embryos were frozen in 10% glycerol + 10% sucrose by slow and rapid freezing. Ovarian oncytes were frozen in 20% g]ycerol+l0% ethylene glycerol + 30% Ficol + 10% sucrose by vitrification and the survival of frozen embryos and ovarian oncytes were judged by FDA-test. The results are summarized as follows; 1. Estrus after the injection of 2500, 3000 I.U. PMSG and 4Omg FSH were 32.8, 35.0 and 43.4 and the duration of estrus were 18.6, 18.8 and 22.4 hours respectively. 2. The average sizes of the left ovaries were 5.4cm (2, 500 IU PMSG), 5.1cm (3, OOOIU PMSG) and 6.4cm (FSH), and the right were 6.2cm (2, 5001U PMSG), 5.7cm (3, OOOIU PMSG) and 7.&m (FSH) respectively. There were significant differences in the right overies among treatments (P<0.05). 3. The average number of ovarian follicles in the left ovaries were 4.8 (2, 500 IU PMSG), 5.2(3, 000 IU PMSG) and 7.8 (FSH) respectively. There were significant difference in the right ovaries among treatments (P<0.05). 4. In the average numbers of ovulation points in the left ovaries were 3.0 (2, 5001U PMSG), 3.2 (3, OOOIU PMSG) and 4.4 (FSH) respectively, and the right were 7.2 (2, 5001U PMSG), 7.8(3, 000IU PMSG) and 11.4 (FSH). There were significant differences in the right ovaries among treatments (P<0.05). 5. The numbers of the recovered embryos were 20 (2, 5001U PMSG), 19 (3, 000 IU PMSG) and 21 (FSH) respectively, and oncytes and degenerted oncytes were 6.5 and 11.0 Estrus periods of post parturation were 52.4days (2, 5001U PMSG), 69.8days (3, OOOIU PMSG) and 62.4days (FSH) respectively. 6. The FDA score of cow morulae frozen by slow freezing, sernirapid frezing and vitrified freezing was higher in slow (3.1) and vitrified freezing (3.0) than that in semirapid freezing (1.28). The FDA-scores of cow, pig and rabbit ovarian oocytes frozen in 20% glycerol + 10% ethylene glycol + 30% Ficoll + 10% sucrose by vitrification were higher in cows (3.3) than both in pigs (2.6) and rabbits (2.3).

• Electrical & Electronic Materials
• /
• v.9 no.7
• /
• pp.727-732
• /
• 1996

In the present paper, the Cu films 4.mu.m thick were deposited by RF magnetron sputtering method on Si wafer. The Cu films deposited at a condition of 100W, 10mtorr exhibited a low electrical resistivity of 2.3.mu..ohm..cm and densed microstructure, poor adhesion. The Cu films grown by 200W, 20mtorr showed a good adhesion property and higher electrical resistivity of 7.mu..ohm..cm because of porous columnar microstructure. Therefore, The Cu films were deposited by double layer deposition method using RF magnetron sputtering on Si wafer. The dependence of the electrical resistivity, adhesion, and reflectance in the CU films [C $U_{4-d}$(low resistivity) / C $U_{d}$(high adhesion) / Si-wafer] on the thickness of d has been investigated. The films formed with this deposition methods had the low electrical resistivity of about 2.6.mu..ohm..cm and high adhesion of about 700g/cm.m.m.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.5 no.2
• /
• pp.123-132
• /
• 2007

This study was performed to evaluate the co- and mutual separation for Am, Cm and RE elements from the simulated multi-component solution equivalent to real HLW level by a Zr-DEHPA(di-(2-ethylhexyl) phosphoric acid containing Zirconium)/$NDD(n-dodecane)-HNO_3$ extraction system. Zr-DEHPA was self-synthesized and the optimal condition of (15g/L Zr-1M DEHPA)/NDD-1M $HNO_3$ was selected taking into consideration of prevention of the third phase, and effects of concentration of DEHPA, nitric acid and impregnant amount of Zr on the co-extraction of Am, Cm and RE. In that condition, the extraction yields were 81% (Am), 85% (Cm), more than 80% (RE elements), 98% (Mo), 85% (Fe), 98% (U), 73% (Np), and less than 5% (other elements) so that the system developed for the co-extraction of Am-Cm/RE was proved to be available. For that, however, U, Np, Mo and Fe was elucidated to have to be removed in advance, and Zr inducing the third phase formation was found to be practically excluded. The co-extracted Am-Cm/RE were sequentially separated in an order of Am-Cm (stripping agent : 0.05 M DTPA-1M Lactic acid of pH 3.6)${\rightarrow}RE$ (stripping agent : 5M $HNO_3$), and then their separation factors were evaluated. At above conditions, Am of 65.4%, Cm of 63.9%, RE (except for Y) of more than 85% were stripped.

• Construction Engineering and Management
• /
• v.18 no.4
• /
• pp.8-11
• /
• 2017

• Korean Journal of Agricultural Science
• /
• v.11 no.1
• /
• pp.133-145
• /
• 1984

To study the effect of foaming agent on the characteristic of mortar, the tests of water-cement ratio and bulk density of mortar were done under the different mixing ratio with G. U and J foaming agents. The results obtained were summarized as follows: 1. At the mixing ratio of 1 : 4 and 0.5% of foaming agent, the highest water-cement ratio was 90% by G, 88.3% by U and 70% by J foaming agent, respectively, being lower than 91.6% of that of cement mortar. 2. At the mixing ratio of 1 : 3 and 3.0% of foaming agent, the water-cement ratio was decreased up to 22.0% by G and 24.1% by U foaming agent, respectively, but it gradually was increased in richer and poorer mixing ratio. At the mixing ratio of 1 : 4 and 3.0% of foaming agent, the water-cement ratio was decreased up to 53.1% by J foaming agent, but it gradually was increased in richer mixing ratio. 3. At the mixing ratio of 1 : 1 and 0.5% of foaming agent, the highest bulk density was $1.981g/cm^3$ by G, $1.863g/cm^3$ by U and $1.149g/cm^3$ by J foaming agent, respectively, being lower than $2.048g/cm^3$ of that of cement mortar. 4. At the mixing ratio of 1 : 2 and 3.0% of foaming agent, the bulk density was decreased up to 20.7% by G, 23.7% by U and 56.5% by J foaming agent, respectively, but it gradually was increased in richer and poorer mixing ratio. 5. The water-cement ratio and bulk density were decreased in more addition of foaming agent, respectively, multiple regression equations of water-cement ratio and bulk density were computed depending on a function of mixing ratios and addition of foaming agents.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.25 no.6
• /
• pp.1046-1056
• /
• 2001

For the purpose of standardizing sizing systems for infants and children's clothing, the researchers surveyed 20 different apparel manufacturers in Korea. The apparel production sizing systems used in the industry were analysed. The researchers also compared standard apparel sizing systems developed for infants and children's clothing in Korea. ISO, Japan, and U.S.A. The followings are the results of this study. 1. As survey findings of companies's views about sizing systems, boys or girls sizing system needed to be developed for 3 years old and over. The plus sizes are needed to be developed and children 9 years old and over need the plus size. 2. The body size specification in most sizing systems collected shows that chest circumference was increased 2cm for every infants sizes, and 3cm for boys and girls'sizes, from size 100 to size 130. However, the chest and waist circumference measurements were increased 4 to 8cm for large sizes, from size 130 to size 170. 3. There are similarity and dissimilarity among the standard sizing systems of ISO, Japan(JIS), U.S.A(ASTM), and Korea(KS). The ASTM developed infants'garment sizes for the babies who are 24months old and under. The most national standards, however, developed infant apparel sizing system for the babies under 105cm tall or 4 years old. 4. The range of body measurements covered by boys/girls sizing system were different by the nation. The U.S. system (ASTM) is for boys and girls who are taller than 120cm. The Japanese system(JIS) is for the children who are taller than 90cm.

• Journal of the Korean Chemical Society
• /
• v.27 no.4
• /
• pp.279-286
• /
• 1983

An apparatus was made for the electrodeposition of alpha emitting actinide nuclides, $^{207}Bi$ and $^{210}Po$. The electrodeposition was made on a polished stainless steel plate cathode. The anode was made of platinum wire and to stir the solution. With the ammonium chloride as electrolyte initial pH = 4, chloride concentration = 0.6M and solution volume = 15ml, a current of 1.5 ampere(current density = 0.59A/$cm^2$) was flowed for 100 minutes for the quantitative recovery of electrodeposition and on average recovery of 98.3% was obtained within ${\pm}$0.7% uncertainty. Alpha spectrometry of the electrodeposited sample showed alpha peaks from $^{210}Po, ^{234}U$ and $^{239}Pu$ having energy resolution (FWHM) of 18.3, 21.8 and 36.0 keV respectively. The electrodeposition and alpha spectrometry for a natural uranium sample of domestic origin gave $^{238}U : ^{234}U = 1 : 6.1{\times}10^{-5}$ and for a neutron-irradiated uranium sample did $^{238}U : ^{239}Pu : ^{241}Am = 100 : 0.0263 : 5.20{times}10^{-5}$. The result of $^{238}U$ determination in the irradiated sample by electrodeposition-alpha spectrometry was in accord within ${\pm}1.6%$ of relative error with the results of solid fluorimetry and mass spectrometry. For $^{239}Pu$ the result of electrodeposition-alpha spectrometry was in accord within ${\pm}$4.0% of relative error with the results of anion exchange separation and the thenoyltrifluoroacetone(TTA) extraction both followed by alpha spectrometries.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.13 no.1
• /
• pp.56-66
• /
• 2008

Subtidal surface currents are derived from HF radar measurements in the Saemangeum coastal ocean of the Yellow sea in July 2002 and from September to November 2004. The surface current field is analyzed to examine the effect of wind, river plume and coastline change on the spatial distribution and temporal variation of the surface currents. In July 2002, average wind speed was 0.5 m/s and freshwater discharge from the Keum River was $0.88{\times}10^7\;ton/day$. Temporal mean currents ($\overline{U}$) flow to the northwest with speed of $7{\sim}10\;cm/s$ near the Keum River estuary, to the west as fast as 13 cm/s near the opening gap of the Saemangeum $4^{th}$ dyke, and to the northwest off the Gogunsan-archipelago. This flow pattern is a result of the Keum River plume dispersal and tide-residual currents from the opening gap of the Saemangeum $4^{th}$ dyke. Time series of spatially-averaged current (<$U-\overline{U}$>) direction is highly (r=0.98) correlated with wind direction. From September to November 2004, the opening gap of the Saemangeum $4^{th}$ dyke was closed, northwesterly wind blew with speed of 2.5 m/s on average and the Keum River discharge was $1.19{\times}10^7\;ton/day$. Temporal mean current field ($\overline{U}$) has weak surface flow in most of the coastal ocean and relatively strong currents flow to the southwest with speed of 10 cm/s along the shape coastline of the Gogunsan-archipelago and the Saemangeum $4^{th}$ dyke. The strong flow is generated by the prevailing northwesterly wind which pushes the Keum River plume toward the Saemangeum $4^{th}$ dyke. The residual currents from the opening gap of the Saemangeum $4^{th}$ dyke disappeared and correlation coefficient between time series of spatially-averaged current () direction and the wind direction is 0.69.