• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.25 no.11
• /
• pp.902-905
• /
• 2012

This study is explore the photoelectric conversion change of dye-sensitized solar cells with surface treatment of the conductive substrate. gases of FTO surface treatment were $N_2$, and $O_2$. Treatment conditions of surface were gas flux from 25 sccm to 50 sccm and RF power were from 25 W to 50 W. Treatment time and pressure were fixed 5 min and 100 mtoor. The best sheet resistance and surface roughness were obtained by $O_2$ 50 sccm and 50 W and that result were 7.643 ${\Omega}/cm^2$ and 17.113 nm, respectively. The best efficiency result was obtained by $O_2$ 50 sccm and 50 W and that result of Voc, Jsc, FF and efficiency were 7.03 V, 14.88 $mA/cm^2$, 63.75% and 6.67%, respectively.

• Journal of Korean Neurosurgical Society
• /
• v.64 no.5
• /
• pp.776-783
• /
• 2021

Objective : The purpose of this study was to identify risk factors for distal adding on (AO) or distal junctional kyphosis (DJK) in adolescent idiopathic scoliosis (AIS) treated by posterior spinal fusion (PSF) to L3 with a minimum 2-year follow-up. Methods : AIS patients undergoing PSF to L3 by two senior surgeons from 2000-2010 were analyzed. Distal AO and DJK were deemed poor radiographic results and defined as >3 cm of deviation from L3 to the center sacral vertical line (CSVL), or >10° angle at L3-4 on the posterior anterior- or lateral X-ray at ultimate follow-up. New stable vertebra (SV) and neutral vertebra (NV) scores were defined for this study. The total stability (TS) score was the sum of the SV and NV scores. Results : Ten of 76 patients (13.1%) were included in the poor radiographic outcome group. The other 66 patients were included in the good radiographic outcome group. Lower Risser grade, more SV-3 (CSVL doesn't touch the lowest instrumented vertebra [LIV]) on standing and side bending films, lesser NV and TS score, rigid L3-4 disc, more rotation and deviation of L3 were identified risk factors for AO or DJK. Age, number of fused vertebrae, curve correction, preoperative coronal/sagittal L3-4 disc angle did not differ significantly between the two groups. Multiple logistic regression results indicated that preoperative Risser grade 0, 1 (odds ratio [OR], 1.8), SV-3 at L3 in standing and side benders (OR, 2.1 and 2.8, respectively), TS score -5, -6 at L3 (OR, 4.4), rigid disc at L3-4 (OR, 3.1), LIV rotation >15° (OR, 2.9), and LIV deviation >2 cm from CSVL (OR, 2.2) were independent predictive factors. Although there was significant improvement of the of Scoliosis Research Society-22 average scores only in the good radiographic outcome group, there was no significant difference in the scores between the groups. Conclusion : The prevalence of AO or DJK at ultimate follow-up for AIS with LIV at L3 was 13.1%. To prevent AO or DJK following fusion to L3, we recommend that the CSVL touch L3 in both standing and side bending, TS score is -4 or less, the L3/4 disc is flexible, L3 is neutral (<15°) and ≤2 cm from the midline and the patient is ≥ Risser 2.

• Journal of Embryo Transfer
• /
• v.33 no.3
• /
• pp.119-127
• /
• 2018

The purpose of this study is to examined the electrofusion and activation conditions for the production of porcine somatic cell nuclear transfer (SCNT) embryos. In this study, immature oocytes were cultured in TCM-199 with and without hormones for 22 hours. Skin fibroblasts cells of porcine were transferred into the perivitelline space of enucleated in vitro matured oocytes. Cell fusion was performed with two different pulses that each one pulse (DC) of 1.1 kV/cm or 1.5 kV/cm for $30{\mu}sec$. After fusion subsequent activation were divided into three groups; non-treatment (control) and treatment with 2 mM 6-DMAP or $7.5{\mu}g/ml$ cytochalasin B for 4 hours. Transferred embryos were cultured in PZM-3 (Porcine Zygote Medium-3) in $5%\;CO_2$ and 95% air at $39^{\circ}C$ for 7 day. Apoptosis-related genes (Caspase-3, BCL-2, mTOR, and MMP-2) were analyzed by immunofluorescence staining. There was no significant difference between two different electrofusion stimuli in the cleavage rate; $64.9{\pm}4.8%$ in 1.1 kV/cm and $62.7{\pm}4.0%$ in 1.5 kV/cm. However, blastocyst formation rate (%) was significantly different among three different activation groups (no treatment, 2 mM 6-DMAP or $7.5{\mu}g/ml$ cytochalasin B) combined with electrofusion of 1.1 kV/cm. The blastocyst formation rate was $12.6{\pm}2.5$, $20.0{\pm}5.0$, and $34.9{\pm}4.3%$ in control, 2 mM 6-DMAP, and $7.5{\mu}g/ml$ cytochalasin B, respectively. Immunofluorescence data showed that expression levels of caspase-3 in SCNT embryos undeveloped to blastocyst stage were higher than those in the blastocyst stage embryos. Expression levels of Bcl-2 in blastocyst stage embryos were higher than those in the arrested SCNT embryos. These results showed that the combination of an electric pulse (1.1 kV/cm for $30{\mu}sec$) and $7.5{\mu}g/ml$ cytochalasin B treatment was effective for production of the porcine SCNT embryos.

• Proceedings of the KIEE Conference
• /
• 2005.07c
• /
• pp.2160-2162
• /
• 2005

중성자 발생을 위한 구형 집속빔 핵융합 장치 방전의 실험적 결과들이 제시되었다. 실험 장치는 직경 22cm, 높이 20cm의 진공용기 안에 동심원적으로 위치한 구형 양극과 grid 음극으로 구성된다. 진공용기에 아르곤 기체를 주입하고, grid 음극에 펄스 전압을 인가하여 방전을 발생시켰다. 다양한 grid 음극에 대한 방전의 실험적 결과들이 전자적, 광학적으로 측정되었다.

• Korean Journal of Animal Reproduction
• /
• v.24 no.4
• /
• pp.407-417
• /
• 2000

The present study was to examine effects of various electrical stimulus treatments used for electro-fusion on the preimplantation development of bovine nuclear transfer (NT) embryos with fetal fibroblast cells. Fetal fibroblast cells were isolated from one fetus at day 45 of gestation in Holstein cow, and passaged 3 to 4 times before being transferred into enucleated oocytes. Single fibroblast cells were individually placed into the perivitelline space of enucleated oocytes by using a micromanipulator. At first, the fusion and developmental rates of reconstructed oocytes were compared between different electric stimulation conditions. When fusion of the reconstructed oocyte was induced by different electric pulse periods (15, 30 and 45 $\mu$sec) at a DC pulse of 1.8 kV/cm, 15 (45.5%, 120/264) or 30 $\mu$ sec group (43.9%, 106/241) showed a higher fusion rate than 45 $\mu$sec group (23.2%, 58/250, P＜0.05). However, no difference was detected in the development rate of the fused oocytes to blastocysts between groups. Next experiment was to examine the effects of different electrical field strengths (1.5, 1.8 and 2.1 kV/cm) for 15 $\mu$sec at electrofusion on in vitro development of the NT embryos. As results, there was no difference in the fusion and developmental rates of the NT embryos between electrical strength (P＞0.05). Finally, developmental competence of bovine NT embryos with somatic cells was compared with IVF-derived embryos. Of enucleated oocytes fused with fibroblast cells, 27.4% (75/274) developed to the blastocyst stage, which is similar to that (24.5%, 58/237) of IVF-derived embryos. However, mean nuclei number of NT blastocysts was smaller than that of IVF-derived blastocysts. Thus, we have established an optimal condition (1.8 kV/cm, 15 $\mu$sec) for electric fusion of bovine NT oocytes with somatic cells. The present study indicates that bovine reconstructed embryos with somatic cells normally develop to blastocyst stage in vitro, although having smaller nuclei numbers of blastocysts as compared to IVF-derived embryos.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.25 no.8
• /
• pp.620-625
• /
• 2012

The sol-gel method has been widely used to synthesize the $TiO_2$ for dye sensitized solar cells and has advantages of easily fabrication process, controlling the $TiO_2$ phase and getting transparent thin-film composed of the $TiO_2$. In this paper, we synthesized the crystalline $TiO_2$ by sol-gel method controlled by the quantity ratio of Nitric acid and Ammonium hydroxide additives. The best efficiency result was obtained by 0.05 M Ammonium hydroxide and that results of Voc, Jsc, FF, and efficiency were 0.68 V, 3.28 mA/$cm_2$, 58.14 and 5.21%, respectively.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1715-1718
• /
• 2007

New ITO thin film of good performance has been developed by brand-new, plasma-damage-free sputtering process at the room temperature. The room temperature-processed ITO films with optimized conditions as neutral beam acceleration bias of -30V and In & Sn composition ratio of 99:01 gives lower resistivity as $4.22{\times}10^{-4}{\Omega}-cm$ and higher transmittance over 90% a wavelength of 550 nm. The transmission electron microscope (TEM) images of the films show a nano-crystalline structure.

• The Journal of Korean Society of Virology
• /
• v.28 no.1
• /
• pp.21-30
• /
• 1998

Synthetic genes encoding the gag p24 and the part of the envelope protein gp41 of the human immunodeficiency virus (HIV-1) were cloned and overexpressed as fusion proteins in Escherichia coli, using an expression vector carrying T7 promoter and the poly-histidine leader, sequence. The overexpressed p24 fusion protein was purified by centrifugation, Ni-affinity chromatography and CM-sepharose chromatography. The overexpressed gp41 fusion protein was purified by centrifugation, $C_4$ chromatography and DEAE-sepharose chromatography. The purified fusion proteins showed a high level of purity and immunoreactivity in SDS-polyacrylamide gel electrophoresis and western blot analysis. These results suggest that this prokaryotic - expression purification method is suitable for obtaining a large amount of the viral antigen which may be useful for screening of antibodies to HIV-1 in human blood samples.

• The Journal of Korean Society for Radiation Therapy
• /
• v.26 no.1
• /
• pp.127-135
• /
• 2014

Purpose : By taking advantage of each imaging modality, the use of fused CT/MRI image has increased in prostate cancer radiation therapy. However, fusion uncertainty may cause partial target miss or normal organ overdose. In order to complement such limitation, our hospital acquired MRI image (Planning MRI) by setting up patients with the same fixing tool and posture as CT simulation. This study aims to evaluate the usefulness of the Planning MRI through comparing and analyzing the diagnostic MRI image and Planning MRI image. Materials and Methods : This study targeted 10 patients who had been diagnosed with prostate cancer and prescribed nonhormone and definitive RT 70 Gy/28 fx from August 2011 to July 2013. Each patient had both CT and MRI simulations. The MRI images were acquired within one half hour after the CT simulation. The acquired CT/MRI images were fused primarily based on bony structure matching. This study measured the volume of prostate in the images of Planning MRI and diagnostic MRI. The diameters at the craniocaudal, anteroposterior and left-to-right directions from the center of prostate were measured in order to compare changes in the shape of prostate. Results : As a result of comparing the volume of prostate in the images of Planning MRI and diagnostic MRI, they were found to be $25.01cm^3$(range $15.84-34.75cm^3$) and $25.05cm^3$(range $15.28-35.88cm^3$) on average respectively. The diagnostic MRI had an increase of 0.12 % as compared with the Planning MRI. On the planning MRI, there was an increase in the volume by $7.46cm^3$(29 %) at the transition zone directions, and there was a decrease in the volume by $8.52cm^3$(34 %) in the peripheral zone direction. As a result of measuring the diameters at the craniocaudal, anteroposterior and left-to-right directions in the prostate, the Planning MRI was found to have on average 3.82cm, 2.38cm and 4.59cm respectively and the diagnostic MRI was found to have on average 3.37cm, 2.76cm and 4.51cm respectively. All three prostate diameters changed and the change was significant in the Planning MRI. On average, the anteroposterior prostate diameter decrease by 0.38cm(13 %). The mean right-to-left and craniocaudal diameter increased by 0.08cm(1.6 %) and 0.45cm(13 %), respectively. Conclusion : Based on the results of this study, it was found that the total volumes of prostate in the Planning MRI and the diagnostic MRI were not significantly different. However, there was a change in the shape and partial volume of prostate due to the insertion of prostate balloon tube to the rectum. Thus, if the Planning MRI images were used when conducting the fusion of CT/MRI images, it would be possible to include the target in the CTV without a loss as much as the increased volume in the transition zone. Also, it would be possible to reduce the radiation dose delivered to the rectum through separating more clearly the reduction of peripheral zone volume. Therefore, the author of this study believes that acquisition of Planning MRI image should be made to ensure target delineation and localization accuracy.

• Journal of Korea Multimedia Society
• /
• v.15 no.2
• /
• pp.195-203
• /
• 2012

This paper proposes ground target classification algorithm based on decision fusion and feature extraction method using multi-sensor images. The decisions obtained from the individual classifiers are fused by applying a weighted voting method to improve target recognition rate. For classifying the targets belong to the individual sensors images, features robust to scale and rotation are extracted using the difference of brightness of CM images obtained from CCD image and the boundary similarity and the width ratio between the vehicle body and turret of target in FLIR image. Finally, we verity the performance of proposed ground target classification algorithm and feature extraction method by the experimentation.