• Korean Journal of Ichthyology
• /
• v.34 no.3
• /
• pp.201-207
• /
• 2022

Total 418 Yellow Croaker Larimichthys polyactis were examined and the range of total length (TL) was 12.0~27.5 cm and average total length was 19.6 cm. The most important prey component in the diets of L. polyactis was Pisces that constituted 46.5% in %IRI (Index of relative importance). Euphausiacea was the second largest prey component. The result of analysis in ontogenetic and seasonal changes significantly exhibited. The proportion of Pisces increased as increasing body size, whereas the consumption of Macrura decreased gradually. The diets also were different among seasons, with the difference particularly being evident between warm (summer and autumn) and cold (winter and spring) seasons. Permutational multivariate analysis of variance (PERMANOVA) revealed significant dietary differences by seasons (P=0.001).

• Journal of Korean society of Dental Hygiene
• /
• v.12 no.5
• /
• pp.1049-1058
• /
• 2012

Objectives : It will be necessary to make statement about the competence targeted in the dental hygienic education that adopts the competence-based curriculum from the standpoint of core competence which the students need to be equipped with in the society. Methods : To achieve the education objective of Dental Hygienics, the information available on the website of the Korean Dental Association, universities and graduate schools were used, and the education objectives of the concerned universities which were posted in the websites of 82 universities from July to August, 2011 were analyzed. Results : C7 and C1 accounted for 21.1%, the highest percentage, in the core capability, while HP1 comprised 79.6% in the health improvement and disease prevention. CM1 stood at 73.7%, the highest percentage, in the community involvement(CM) area, and PC4 accounted for 90.8%, the highest percentage, in the patient care(PC) area. In the professional growth and development(PGD) area, PGD1 was the highest, followed by PGD3. In relation to the comments on the occupational types after graduation, 63.1% of respondents mentioned the dental hygienists at the school, while 33.3% did not make any comment on the dental hygienists. Conclusions It was necessary to re-establish the essential objectives of the graduates based on the competence as the accomplishments of studying and learning in the department of dental hygiene. It may be a useful method to set the competency-based education objective on the basis of the implementation ability and the level of graduates.

• Korean Journal of Applied Biomechanics
• /
• v.31 no.4
• /
• pp.297-307
• /
• 2021

Objective: The aim of this study was to analyze kinetic variables between thermotherapy and dynamic warm-up during drop-landing. Method: Twenty male healthy subjects (Age: 21.85 ± 1.90 years, Height: 1.81 ± 0.06 cm, Weight: 68.5 ± 7.06 kg) underwent three treatments applied on the thermotherapy of femoral muscles and a dynamic warm-up. The thermotherapy was performed for 15 minutes while sitting in a chair using an electric heating pad equipped with a temperature control device. Dynamic warm-up performed 14 exercise, a non-treatment was sitting in a chair for 15 minutes. Core temperature measurements of all subjects were performed before landing at a height of 50 cm. During drop-landing, core temperature, joint angle, moment, work of the sagittal plane was collected and analyzed. All analyses were performed with SPSS 21.0 and for repeated measured ANOVA and Post-hoc was Bonferroni. Results: Results indicated that Thermotherapy was increased temperature than other treatments (p = .000). During drop-landing, hip joint of dynamic warm-up was slower for angular velocity (p < .005), and left ankle joint was fastest than other treatments (p = .004). Maximum joint moment of dynamic warm-up was smaller for three joints (hip extension: p = .000; knee flexion/extension: p = .001/.000; ankle plantarflexion: p = .000). Negative work of dynamic warm-up was smaller than other treatments (p = .000). Conclusion: In conclusion, the thermotherapy in the local area doesn't affect the eccentric contraction of the thigh. The dynamic warm-up treatment minimized the joint moment and negative work of the lower joint during an eccentric contraction, it was confirmed that more active movement was performed than other treatment methods.

• The Korean Journal of Ecology
• /
• v.4 no.3_4
• /
• pp.114-123
• /
• 1981

Diurnal acid fluctuations, stomatal resistance, and morphology and anatomy were investigated in leaves and stems P. oleracea L. growing under the natural environmental condition. A CAM-like pattern of acid fluctuation was exhibited not in leaves of the young purslane but in its stems. Defoliated stems showed a decreased in diurnal changes of total acidity as compared with normal stems. Excised stems stored in continuous darkness exhibited diurnal acid rhythms, and they showed light deacidifications for three days. Kranz-type arrangement was observed in leaves, but not in stems. Micrography of cross sections of stems showed cells with relatively large vaculoles and a few chloroplasts. The number of stomata was 3,275cm-2 in leaves, while the stomata could not be observed in stems. Stomatal resistance was high at night and low in daytime in leaves of the young purslane, and the range of its value was 5~40 sec.$\textrm{cm}^{-1}$. But stomatal resistance in leaves of the water-stressed plant was comparratively high in day time, and its value was 30 sec.$\textrm{cm}^{-1}$. The result of these studies showed the possibility that the stem of P.oleracea L. possesses CAM under certain stressed conditions.

• Journal of Ecology and Environment
• /
• v.30 no.2
• /
• pp.151-159
• /
• 2007

We studied the optimal ranges of water and soil characteristics for wetland plants, particularly Scirpus tabernaemontani (softstem bulrush) and Typha latifolia (broadleaf cattail), which are dominant species with potential for restoration of Korean wetlands. We observed vegetation in S. tabernaemontani and T. latifolia communities from the mid to late June, 2005, and measured characteristics of water environments such as water depth (WD), temperature (WT), conductivity (WC), and concentration of several ions $(NO_3{^-}-N,\;Ca^{2+},\;Na^+,\;Mg^{2+},\;and\;K^+)$, and characteristics of soil environments such as soil texture, organic matter (loss on ignition, LOI), conductivity, and pH. The S. tabernaemontani community was accompanied by Zizania latifolia (Manchurian wildrice), Persicaria thunbergii (Korean persicary), Actinostemma lobatum (lobed actinostemma), and Beckmannia syzigachne (American slough grass), while the T. latifolia community was accompanied by P. thunbergii, T. angustifolia (narrowleaf cattail), and Glycine soja (wild soybean). We defined the optimal range for distribution (ORD) as the range that each plant was crowded. The optimal range of water characteristics for the S. tabernaemontani community was a $WD\;10{\sim}50cm,\;WT\;24.0{\sim}32.0^{\circ}C,\;WC\;100{\sim}500{\mu}S/cm,\;{NO_3}{^-}-N\;0{\sim}60ppb,\;K^+\;0.00{\sim}1.50ppm,\;Ca^{2+}\;7.50{\sim}17.50ppm,\; Na^+\;2.50{\sim}12.50ppm,\;and\;Mg^{2+}\;3.00{\sim}7.00ppm$. In addition, the optimal range of soil characteristics for the S. tabernaemontani community was a soil texture of loam, silty loam, and loamy sand, $LOI\;8.0{\sim}16.0%,\;pH\;5.25{\sim}6.25$, and conductivity $10{\sim}70{\mu}S/cm$. The optimal range of water characteristics for the T. latifolia community was a $WD\;10{\sim}30cm,\;WT\;22.5{\sim}27.5^{\circ}C,\;WC\;100{\sim}400{\mu}S/cm,\;{NO_3}{^-}-N\;0{\sim}60ppb,\;K^+\;0.00{\sim}1.50ppm,\;Ca^{2+}\;0.00{\sim}17.50ppm,\;Na^+\;0.00{\sim}12.50ppm,\;and\;Mg^{2+}\;0.00{\sim}5.00ppm$, and the optimal range of soil characteristics for the T. fatifolia community was a soil texture of loam, sandy loam, and silty loam, LOI $3.0{\sim}9.0%,\;pH\;5.25{\sim}7.25$, and conductivity $0{\sim}70{\mu}S/cm$.

• Journal of Radiation Protection and Research
• /
• v.35 no.2
• /
• pp.77-80
• /
• 2010

The spectroscopy toolkit has been developed and tested. The toolkit consists of a CsI(Tl)/PIN diode detector, integrated electronics, and a multi.channel.analyzer and its size was 40 cm(width) by 20 cm(length) by 6 cm(high). It is compact, very portable and simpler and cheaper compared to the conventional spectroscopy system. The gamma energy resolutions of the toolkit were 7.9% for the 660 keV of $^{137}Cs$ and 4.9% for 1,332 keV of $^{60}Co$ respectively. The linearity for gamma energies was good. When the energy spectrum of a ceramic sample containing $^{232}Th$ was measured with the spectroscopy toolkit for 20 minutes, there were significant peaks of the heavy metal. These results show that the resolution of the spectroscopy toolkit is sufficient to accumulate a quality spectrum in a few minutes by using weak, encapsulated commercial sources. Furthermore a toolkit experiment that how to measure energy spectra using the toolkit, and how to identify specific isotopes in a pottery piece, could be widely adopted for education and even for more sophisticated and higher level experiments.

• The Korean Journal of Ecology
• /
• v.8 no.1
• /
• pp.39-48
• /
• 1985

The airborne pollens were investigated by Durhan's pollen trap in Mt. Kwanak from March 1, 1984 to February 28, 1985. The observed airborn pollens were identified 22 families and 49 genera, which were divided into 27 tree pollens. Most airborne pollens were found from late-March to late-September and a few from early-November to late-February, 1985. The first observed pollen of the year was Alnus on March 5 and the last was Artemisia on Decomber 19, 1984. The maximum amount of daily airborne pollens was 823 grains/cm2 on May 16. Peak day and the maximum amount of major airborne pollens were as follows; 166 grains/cm2/day of Alnus pollen on April 4, 38 gr. of Populus on April. 13, 22 gr. of Quercus on May 10, 791 gr. of Pinus on May 26, 139 gr. on May 26 and 104 gr. of Graminae on September 6, 24 gr. of Ambrosia on Sep. 10 and 236 gr. on May 26 and 104 gr. of Graminae on September 6, 24 gr. of Ambrosia airborne pollen for one year was 12,733 grains/cm2 which were composed of 61% tree pollens and 39% herb ones. Decreasing order of pollen counts was Pinus, Alnus, Quercus and Populus in trees, and Graiminae, Artemisia and Ambrosia in herbs. Most of the airborn pollens were deposited in the day-time and a few at night, the maximum at 2∼4p.m.and the mininum at 8∼10 p.m.

• Journal of The Korean Astronomical Society
• /
• v.42 no.5
• /
• pp.125-134
• /
• 2009

We investigated the circumnuclear region of the Seyfert 2 galaxy NGC 5728, using the CFHT 3.6 m OASIS $[S_{II}]$, $[O_{III}]$ & $H\beta$ spectral images complemented with the IUE spectra. The physical condition of the circumnuclear zone has been derived: the gas density (indicated by $[S_{II}]$6716/31 ratio) around the C core is generally similar to that around the NW core, i.e., $\sim500cm^{-3}$. However, there appears to be evidence of a higher density shell in front of the NW core, $\sim10^4cm^{-3}$ at -250 km $s^-1$. The IUE $Si_{III}$]1892/$C_{III}$]1909 ratio implies a possible presence of a broad emission region of gas densities of $\sim10^{10}cm^{-3}$. The SE cone and surrounding area show several prominent features, while the NW cone does not show any particular structure: we identified three prominent blobs in the SE cone and one possible candidate in the NW cone. The outflow activities exist within the relatively large conic opening angle. We discussed the possibility of inflow or outflow activities of blobs found in the circumnuclear region of NGC 5728. The gas around two cores, two cones, and several blobs, is likely to be excited by the AGN hot source(s).

• The Research Journal of the Costume Culture
• /
• v.18 no.6
• /
• pp.1228-1241
• /
• 2010

This study aims to help understanding on design of basic pattern of shirt collars and to suggest schemes to raise completeness of shape by reviewing problems shown in finished products after sewing. From March 2009 to August 2009, 12 patterns for education and firms were collected centering on basic shirt collar form respectively. There are four problems generally raised from a completed shirt collar. In case of overlapping shirt collar on front neck point, the sewing point of shirt collar should be drawn at front neck point of collar band at a distance of about 0.2~0.3cm, and the center front of band and one of bodice should be arranged in a straight line. In case of the problem about right and left length difference of shirt collar, it is raised by closing so the problem was solved by prolonging about 0.2 cm of the center front of left collar. It was evaluated that adjusting notch point when sewing would be more rational solution than solving something on patterns for distance difference problem of shirt collar between right and left part at center front. And a problem about getting loose of front garment between collar band below and the first button was also raised. It was designed 0.2cm cut of collar band. Around basic shirt collar form, above mentioned solutions are applied to the patterns for education and manufacture experimental clothing. So as a result of sensory evaluation, generally good ratings on all items were received.

• Journal of Fisheries and Marine Sciences Education
• /
• v.11 no.2
• /
• pp.139-149
• /
• 1999

Thermal sprayed Ni-Cr alloy coating on the carbon steel was carried out erosion-corrosion test and electrochemical corrosion test in the marine environment. The erosion-corrosion behavior and electrochemical corrosion characteristics of substrate(SS400) and thermal sprayed Ni-Cr coating was investigated. The erosion-corrosion control efficiency of Ni-Cr coating to substrate was also estimated quantitatively. The main results obtained are as follows : 1) The weight loss rate of Ni-Cr coating layer by the erosion-corrosion compared with substrate was smaller. With the lapse of time, the weight loss rate of substrate was linearly increased in $25{\Omega}{\cdot}cm$ solution, but that of Ni-Cr coating became stable. 2) The corrosion potential of substrate became less noble than that of Ni-Cr coating layer, and the corrosion current density of Ni-Cr coating became lower than that of substrate. 3) The control efficiency of erosion-corrosion of Ni-Cr coating compared to substrate became more dull than that of corrosion in $25{\Omega}{\cdot}cm$ and $5000{\Omega}{\cdot}cm$ solution.