Precise point positioning (PPP) is increasingly used in several parts such as monitoring of crustal movement and maintaining an international terrestrial reference frame using global positioning system (GPS) measurements. An accuracy of PPP data processing has been increased due to the use of the more precise satellite orbit/clock products. In this study we developed PPP algorithm that utilizes data collected by a GPS receiver. The measurement error modelling including the tropospheric error and the tidal model in data processing was considered to improve the positioning accuracy. The extended Kalman filter has been also employed to estimate the state parameters such as positioning information and float ambiguities. For the verification, we compared our results to other of International GNSS Service analysis center. As a result, the mean errors of the estimated position on the East-West, North-South and Up-Down direction for the five days were 0.9 cm, 0.32 cm, and 1.14 cm in 95% confidence level.
The present research investigated the interaction among loading level, corrosion rate and flexural deflection of reinforced concrete beams. 10cm$\times$15cm$\times$110cm reinforced concrete beams were prepared and subjected to different levels of flexural loading, including 0%, 45% and 75% of the ultimate load. The beams with either a pre-load or a sustained load were also exposed to a laboratory environment with ponding and wetting/drying cycling at room temperature. Half cell potential and galvanized current measurements were taken to monitor corrosion process of reinforcing steel. After corrosion initiation, external current was applied to some of the beams to accelerate corrosion propagation. The beam deflections were recorded during the entire tests. The results indicate that loading level has significant effect on corrosion rate. The beams under a sustained load had much higher corrosion rate than the pre-loaded and then unloaded beams. Significant corrosion may result in an increase in beam deflection and affect serviceability of the structure. The present research may provide an insight into structural condition evaluation and service life predictions of reinforced concrete.
Objectives: This study aimed to characterize the nanoparticles produced by welding and grinding processes. Methods: The number concentrations of particles were mapped to determine the distribution of welding fumes in a workplace atmosphere using a hand-held condensation particle counter. An electrical low-pressure impactor was used for measuring the number concentration and particle size distribution. Results: High number concentrations were found around arc cutting and welding (grinding) processes. In the worker's breathing zone, the mean number concentration was 655,000 particles/cm3 and the count median diameter (CMD) was 84 nm with several multi peak distributions (~20, 70, 300 nm). However, at a distance of 3 m from the welding position, the number concentration decreased to 153,000 particles/cm3 with a 70 nm single peak size distribution. During a grinding process, peaks with high concentrations of nanoparticles were temporarily observed. The mean number concentration was 1,520,000 particles/cm3, and the CMD was 30 nm. Nanoparticles (<100 nm) made up 58% and 92% of the aerosols produced by welding and grinding processes, respectively.
본 연구에서는 도로포장재로서 사용되는 투수콘크리트의 공극막힘현상(pore-clogging)을 실험적으로 규명하기 위하여 일련의 현장투수시험과 실내투수시험을 실시하였다. 굵은 골재 최대치수($G_{max}$)가 13mm인 투수콘크리트로 시공된 제주지역의 37지점을 대상으로 현장투수시험을 실시한 결과 투수콘크리트 포장재의 투수계수 수명한계를 0.01cm/sec로 설정할 경우 투수콘크리트 포장재의 수명한계는 약 22개월로 확인되었다. 한편, 투수콘크리트의 공극막힘현상을 재현하기 위하여 투수콘크리트 공시체를 제작하였으며, 공극막힘재 투입농도가 공시체의 굵은 골재 최대치수($G_{max}$)에 따른 실내투수시험을 실시하였다. 실험결과 막힘재의 투입농도에 커질수록 투수콘크리트의 수명한계는 급격하게 감소하며, 투수콘크리트의 굵은 골재 최대치수($G_{max}$)가 커질수록 투수콘크리트의 수명한계는 증가하는 것으로 나타났다. 따라서 투수계수 수명한계에 이르는 시간은 공극 막힘재의 농도와 반비례 관계가 있으며, 굴은 골재 최대치수($G_{max}$)와 비례 관계가 있다. 그리고 일반적인 조건에서 투수콘크리트의 내구연한은 공극막힘재의 농도와 굵은 골재 최대치수($G_{max}$)에 따라 간접적으로 예측이 가능함을 알 수 있다.
미사질식토와 사양토 중 fenoxaprop-P-ethyl의 흡착성과 이동성에 대하여 연구 검토하였다. 두 토양 중 fenoxaprop-P-ethyl은 진탕 30분 후에 약 15%가 흡착되었으며 8~14시간 후에는 의사평형에 도달하였고 50%가 흡착되는 시간은 미사질식토에서 15.8시간, 사양토에서 19.3시간이었다. 본 제초제의 흡착은 Freundlich식에 따랐으며 흡착분배계수(Kd)값은 미사질식토에서 3.86, 사양토에서 2.32이었다. 두 토양의 컬럼에서 fenoxaprop-P-ethyl은 처리 7일 후에는 6cm, 21일 후에는 8cm까지 이동되었으나, 이동성은 누수량의 증가와 더불어 증가되었다. 포장조건의 두토양 중 fenoxaprop-P-ethyl은 처리 14일 후에는 6cm층위까지, 56일 후에는 8cm 층위까지 이동되었다. 그러나 어느 경우이든 처리된 fenoxaprop-P-ethyl의 대부분은 0-2cm 층위에 존재하였다. Fenoxaprop-P-ethyl의 반감기는 1주 이내이었으며 처리 4주 후에는 처리량의 약 90%정도까지 분해되었다. 이상의 결과를 종합하여 볼 때 토양 중 fenoxaprop-P-ethyl은 비교적 이동성이 작고 분해가 빠른 편인 바 주변환경에 대한 위해성이 낮을 것으로 사료된다.
A 7-year-old, castrated male dachshund dog with tumor of the spleen portion was referred to the Kangwon National University. The tumor removed surgically and tumor size was 6~7 cm. Histopathologically, this neoplasm was the presence of perivascular whorls of fusiform cells. The cells also arranged in interlacing bundles or storiform patterns. And this neoplasm consisted of spindle cells that often formed distinct whorls around a central capillary. Immunohistochemical analysis revealed multi-focally immunoreactivity for ${\alpha}$-smooth muscle actin, whereas not immunoreactive for desmin, S-100, von Willebrand factor. On the base of the histological and immunohistochemical results, this neoplasm was diagnosed as a canine hemangiopericytoma.
Purpose: Reconstruction of small defects of the dorsal fingers and toes is a challenging task. Although adipofascial flap is widely used for these areas, additional refinements are warranted. In this paper, we define the appropriate defect size in the finger and toes that can be treated with the adipofascial flap, refine its surgical indications and present a few surgical tips. Materials and Methods: Twelve patients with dorsal defects of the fingers and toes were treated with a random-type adipofascial turn-over flap and skin graft. If the defect area exceeded the size that could be covered by a conventional design, the flap base was designed in oblique or curvilinear fashion to lengthen the flap. For accurate defect coverage, the width of the flap base was designed in an asymmetrical shape depending on the defect configuration, varying the width from 0.3 to 1.0 cm, as opposed to the standard 0.5 to 1.0 cm width. Moreover, the lateral limit of the flap was defined as the lateral axial line. The size of the defect ranged from $3.0{\times}1.7cm$ to $1.5{\times}1.3cm$. Results: All flaps survived completely. Gliding function of the hand was well preserved and there was no evidence of tendon adhesion. Conclusion: The small defect in the dorsal finger and toe can be defined as less than one phalanx-length, measuring about $3.0{\times}2.0cm$ in size. If the defect exceeds this dimension, it is recommended that a different option be considered. We believe the adipofascial flap is an excellent option for treating small defects.
The purpose of this study was to help promote the consumption of rice by substituting rice powder for wheat flour in bread preparation and examining the effect of rice powder particle size in baked rice bread samples. Several experiments were carried to analyze and compare the quality characteristics of prepared samples of wheat flour and rice powder breads. The loaf volume index of the wheat flour bread was 6.34, and the indices of the rice powder bread samples, which were made from powder milled through 20, 35, and 45 mesh (S1, S2 and S3), were 5.37, 5.56, and 5.85, respectively. These data indicated that the loaf volume index of the rice powder bread was lower than that of the wheat flour bread, but the volume of the rice powder bread increased as the particle size of the rice powder became finer. According to texture analysis results using a rheometer, the hardness value of the wheat flour bread was $1.34{\times}10^3\;g/cm^2$, and values of S1, S2, and S3 were $1.74{\times}10^3\;g/cm^2$, $1.57{\times}10^3\;g/cm^2$, and $1.47{\times}10^3\;g/cm^2$, respectively. Therefore, S3, which was made from the finest powder among the rice powder samples, showed the lowest level of hardness. No significant differences were observed for springiness, cohesiveness, and gumminess among the bread samples. However, the wheat flour and rice powder breads had significant differences for bread crumb color. The L-value of S3(76.20) was similar to that of the wheat flour bread(77.22). but the L-values of S1(70.30) and S2(71.21) were lower than that of the wheat flour bread. In terms of redness and yellowness, the values of the rice powder breads were significantly different from those of the wheat flour bread. In terms of overall preference, the sensory evaluation results indicated that S3 was significantly the more preferred and the wheat flour bread was the least preferred among the bread samples. This study also investigated texture changes and mold occurrence in bread samples stored at $25^{\circ}C$ for 5 days. From the 3rd day of storage, bread texture became harder in all samples however, S3 showed the least level of change among the rice powder breads. The occurrence of mold began to increase abruptly from the 4th day of storage, and S2 and S3 showed mold numbers that were 2-fold greater than those of S1 and the wheat flour bread.
Kim, Young-Rok;Park, Eunseo;Oh, Hyungjik Jay;Park, Sang-Young;Lim, Hyung-Chul;Park, Chandeok
Journal of Astronomy and Space Sciences
/
제30권4호
/
pp.269-277
/
2013
In this study, we present results of precise orbital geodetic parameter estimation using satellite laser ranging (SLR) observations for the International Laser Ranging Service (ILRS) associate analysis center (AAC). Using normal point observations of LAGEOS-1, LAGEOS-2, ETALON-1, and ETALON-2 in SLR consolidated laser ranging data format, the NASA/GSFC GEODYN II and SOLVE software programs were utilized for precise orbit determination (POD) and finding solutions of a terrestrial reference frame (TRF) and Earth orientation parameters (EOPs). For POD, a weekly-based orbit determination strategy was employed to process SLR observations taken from 20 weeks in 2013. For solutions of TRF and EOPs, loosely constrained scheme was used to integrate POD results of four geodetic SLR satellites. The coordinates of 11 ILRS core sites were determined and daily polar motion and polar motion rates were estimated. The root mean square (RMS) value of post-fit residuals was used for orbit quality assessment, and both the stability of TRF and the precision of EOPs by external comparison were analyzed for verification of our solutions. Results of post-fit residuals show that the RMS of the orbits of LAGEOS-1 and LAGEOS-2 are 1.20 and 1.12 cm, and those of ETALON-1 and ETALON-2 are 1.02 and 1.11 cm, respectively. The stability analysis of TRF shows that the mean value of 3D stability of the coordinates of 11 ILRS core sites is 7.0 mm. An external comparison, with respect to International Earth rotation and Reference systems Service (IERS) 08 C04 results, shows that standard deviations of polar motion $X_P$ and $Y_P$ are 0.754 milliarcseconds (mas) and 0.576 mas, respectively. Our results of precise orbital and geodetic parameter estimation are reasonable and help advance research at ILRS AAC.
Park, Si Eun;Lee, Joon Hee;Wang, Jung San;Choi, Yoo Rim;Park, Joo Hyun;Lee, Ju Hwan;Choi, Young Duk;Hwang, Hyun Sook;Kim, Soon Hee
국제물리치료학회지
/
제5권1호
/
pp.647-651
/
2014
The purpose of this study is to provide the case of influence of myofacial release(MFR) and cryotherapy in acute whiplash injury. The subjects were consisted of 3 adults(2 males, 1 female) who had been diagnosed with whiplash injury. The performance period was 1 weeks, 6 times and 1 time is 40min(MFR: 20min, cryotherapy: 20min). We measured neck pain(Visual analogue scale, VAS) and cervical alignment(cervical curvature & line of gravity). All measurements of each subject were measured at pre-treatment and post-treatment. The results are listed below. The neck pain(VAS) index decreased from 7.54cm to 4.11cm. The cervical curvature increased from $23.62^{\circ}$ to $29.76^{\circ}$. The line of gravity decreased from 8.03mm to 3.66mm. Based on the results, it can be suggested that both MFR and cryotherapy can be used to neck pain and alignment in acute whiplash injury.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.